2014 Lexus ES300h stop start

154
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zFor automatic connection, see “CHANG-
ING “Bluetooth* Power”” on page 202.
z When the “START STOP ENGINE”
<“POWER”> switch is in ACCESSORY or
IGNITION ON mode, the system
searches for a nearby registered cellular
phone.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
z The system will connect with the phone that
was last connected, if it is nearby.
When “Display Phone Status” is set to
“On” , the connection status is displayed.
(See “Bluetooth
® DEVICE CONNEC-
TION STATUS DISPLAY SETTINGS” on
page 204.)
z This screen appears when the Bluetooth
®
phone is first connected after the “START
STOP ENGINE” <“POWER”> switch is in
ACCESSORY or IGNITION ON
mode.
CONNECTING A Bluetooth®
PHONE
AUTOMATICALLY
When a phone is registered, auto con-
nection is turned on. Always set it to this
mode and leave the Bluetooth
® phone
in a location where connection can be
established.
INFORMATION
●
It may take time if the phone connection
is carried out during Bluetooth® device
playback.
Depending on the type of Bluetooth
®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.

156
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zIf a Bluetooth® phone is disconnected on
purpose, such as turning it off, this does not
happen. Reconnect the Bluetooth
® phone
manually.
RECONNECTING THE
Bluetooth® PHONE
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth
® network when the “START
STOP ENGINE” <“POWER”> switch is
in ACCESSORY or IGNITION ON
mode, the system automatically
reconnects the Bluetooth
® phone.
When “Display Phone Status” is set to
“On” , the connection status is displayed.

170
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Select “Play” to start reading out of the
message. Select “Stop” to stop the func-
tion.
z Select “-” or “+”, turn the “PWR·VOL”
knob, or use the volume switch on the
steering wheel to adjust the message read
out volume.
z The message read out function is available
even while driving.1Select “Reply” .
2Select the screen button corresponding
to the desired message.
3Select “Send” .
zWhile the message is being sent, a sending
message screen is displayed.
4This screen will be displayed if message
delivery fails.
zSelect “Retry” to attempt to send the mes-
sage again or select “Cancel” to cancel.
zWhen the received message is an e-mail
and “Update Message Read Status on
Phone” is set to “On”, “Mark as Unread”
or “Mark as Read” can be selected.
Select “Mark as Unread” to mark mails
that have been read on the Bluetooth
®
phone as unread. Conversely, select
“Mark as Read” to mark mails that have
not been read on the Bluetooth
® phone
as read. (See “MESSAGE SETTINGS”
on page 187.)
z For SMS/MMS, selecting or
pressing the switch on the steering
wheel calls the sender. (See page 164.)
z Select “Reply” to reply to the message.
(See page 170.)
REPLYING (QUICK REPLY)

202
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
5This screen is displayed.
zThe information displays the following
items:
z If it is desirable to ch ange the settings, refer
to the following pages.
z When the settings have been changed,
select “Save” .
■CHANGING “Bluetooth* Power”
When “Bluetooth* Power” is “On” :
The Bluetooth
® device is automatically
connected when the “START STOP EN-
GINE” <“POWER”> switch is in ACCES-
SORY or IGNITION ON mode.
When “Bluetooth* Power” is “Off” :
The Bluetooth
® device is disconnected,
and the system will not connect to it next
time.
z The “Bluetooth* Power” auto connection
state can be set on or off.
• “On” : The auto connection is turned on.
• “Off ” : The auto connection is turned off.
z The auto connection state cannot be
changed from “On” to “Off ” while driving,
but it can be changed from “Off ” to “On” .
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Screen button/Screen itemInformation
“Device Name”
This name will be dis-
played on the device
when it is connected. It
can be changed to a de-
sired name.
“Passcode”
The password that was
set when the Bluetooth®
device was registered
can be changed.
Device
AddressThe device address is
unique to each device. It
cannot be changed.
Profiles
The compatibility profile
of the Bluetooth® device
is displayed on the
screen. (See pages 146
and 264.)
CHANGING THE Bluetooth®
SETTINGS
The Bluetooth
® settings can be
changed according to the following pro-
cedures.
The “Bluetooth* Power” display shows
the following state.

204
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■Bluetooth® DEVICE CONNEC-
TION STATUS DISPLAY SETTINGS
1Select “Display Phone Status” or “Dis-
play Portable Player Status” .
2Select “On”.
3Select “Save” .
1Select “Default” .
2Select “Yes”.
zIf the state of “Bluetooth* Power” is
changed from “Off ” into “On” , Bluetooth®
connection will begin.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
When “Bluetooth* Power” is “On” and
the “START STOP ENGINE”
<“POWER”> switch is in ACCESSORY
or IGNITION ON mode, the
Bluetooth
® phone and portable player’s
connection status can be displayed.
(See “CHANGING “Bluetooth*
Power”” on page 202.)
INITIALIZING THE Bluetooth®
SETTINGS
The settings can be initialized.

210
1. AUDIO/VIDEO SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
2. SOME BASICS
This section describes some of the basic
features of the audio/video system.
Some information may not pertain to
your system.
Your audio/video system works when
the “START STOP ENGINE” <“POW-
ER”> switch is turned to ACCESSORY
or IGNITION ON mode.
CAUTION
●For vehicles sold in U.S.A. and Canada:
Part 15 of the FCC Rules
FCC WARNING: Changes or
modifications not expressly approved by
the party responsi ble for compliance
could void the user’s authority to operate
the equipment.
●Laser products
• USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS
RADIATION EXPOSURE.
• THE USE OF OPTICAL INSTRUMENTS WITH THIS
PRODUCT WILL INCREASE EYE
HAZARD.
NOTICE
●To prevent the 12-volt battery from being
discharged, do not leave the audio/video
system on longer than necessary when
the engine is not running tem is not operating>.
VOICE COMMAND SYSTEM
Press this switch to operate the voice
command system.
z For the operation of the voice command
system and its list of commands, see
pages 308 and 317.
AUDIO SPLIT SCREEN
DISPLAY
The audio split screen can be displayed
while the map screen is displayed. For
details, see page 46.

233
1. AUDIO/VIDEO SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
5
AUDIO/VIDEO SYSTEM
7. DVD PLAYER OPERATION
1Insert a disc into the disc slot.
zAfter insertion, the disc is automatically
loaded.
1Press the “” button and remove the
disc.
1Press the “MEDIA” button if a disc has
already been loaded in the disc slot.
For safety reasons, the DVD video discs
can only be viewed when the following
conditions are met:
(a) The vehicle is completely stopped.
(b) The “START STOP ENGINE” <“POWER”> switch is in
ACCESSORY or IGNITION ON
mode.
(c) The parking brake is applied.
While driving in DVD video mode, only
the DVD’s audio can be heard.
INSERTING A DISC
EJECTING A DISC
INFORMATION
●
If a disc is inserted with the label facing
down, it cannot be played.
PLAYING A DISC

240
1. AUDIO/VIDEO SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
OPERATING A DVD DISC
The playback condition of some DVD
discs may be determined by the DVD
software producer. This DVD player
plays a disc as the software producer in-
tended. As such some functions may not
work properly. Be sure to read the in-
struction manual that comes with the in-
dividual DVD disc. For detailed
information about DVD video discs, see
“DVD PLAYER AND DVD VIDEO
DISC INFORMATION” on page 252.
PRECAUTIONS ON DVD
VIDEO DISC
When recording with a DVD video, au-
dio tracks may not record in some cases
while the menu is displayed. As audio
will not play in this case, verify that the
video tracks are playing and then acti-
vate playback.
When playback of a disc is completed:
If an audio CD or MP3/WMA disc is
playing, the first track or file starts.
If a DVD video is playing, playback will
stop or the menu screen will be dis-
played.
The title/chapter number and playback
time display may not appear while play-
ing back certain DVD video discs.
CAUTION
●Conversational speech on some DVDs is
recorded at a low volume to emphasize
the impact of sound effects. If you adjust
the volume assuming that the conversa-
tions represent the maximum volume
level that the DVD will play, you may be
startled by louder sound effects or when
you change to a different audio source.
The louder sounds may have a significant
impact on the human body or pose a driv-
ing hazard. Keep this in mind when you
adjust the volume.