2014 Lexus CT200h change time

5698-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
8
When trouble arises
Close the exclusive jump starting terminal cover, and reinstall the fuse box
cover to its original position.
Once the hybrid system starts, have the vehicle inspected at any authorized
Lexus dealer or repairer, or another duly qualified and equipped professional as
soon as possible.
■Starting the hybrid system when the 12-volt battery is discharged
The hybrid system cannot be started by push-starting.
■To prevent 12-volt battery discharge
●Turn off the headlights and the audio system while the hybrid system is off.
●Turn off any unnecessary electrical components when the vehicle is running at a low
speed for an extended period, such as in heavy traffic.
■When the 12-volt battery is removed or discharged
●The hybrid system may not start. ( →P. 4 6 5 )
●If the 12-volt battery discharges while the shift position is in P, it may not be possible to
shift the shift position to other positions. In this case, the vehicle cannot be towed with-
out lifting both front wheels because the front wheels will be locked. ( →P. 5 1 0 )
●When the 12-volt battery is reconnected, start the hybrid system and confirm that the
shift position can be changed to each position using the shift position indicator.
●Make sure that the key is not inside the vehicle when recharging or replacing the 12-
volt battery. The key may be locked in the vehicle if the alarm is activated. (→P. 8 5 )
■Charging the 12-volt battery
The electricity stored in the 12-volt battery will discharge gradually even when the vehicle
is not in use, due to natural discharge and the draining effects of certain electrical appli-
ances. If the vehicle is left for a long time, the 12-volt battery may discharge, and the
hybrid system may be unable to start. (The 12-volt battery recharges automatically while
the hybrid system is operating.)
WA R N I N G
■Avoiding 12-volt battery fires or explosions
Observe the following precautions to prevent accidentally igniting the flammable gas
that may be emitted from the 12-volt battery:
●Make sure each jumper cable is connected to the correct terminal and that it is not
unintentionally in contact with any other than the intended terminal.
●Do not allow the other end of the jumper cable connected to the “+” terminal to come
into contact with any other parts or metal surfaces in the area, such as brackets or
unpainted metal.
●Do not allow the + and - clamps of the jumper cables to come into contact with each
other.
●Do not smoke, use matches, cigarette lighters or allow open flame near the 12-volt
battery.
9
CT200h_OM_OM76135E_(EE).book Page 569 Friday, May 30, 2014 1 1:14 AM

5939-2. Customization
CT200h_OM_OM76135E_(EE)
9
Vehicle specifications
■Tu r n s i g n a l l e v e r ( →P. 188)
■Automatic light control system ( →P. 1 9 0 )
■Illumination ( →P. 4 2 6 )
FunctionDefault
settingCustomized setting
Times of flashing of the lane
change signal flashers3
5
O––O
7
9
11
Off
1234
FunctionDefault settingCustomized setting
Light sensor sensitivityStandard-2 to 2O–OO
Welcome light
illumination control On Off – – – O
1234
FunctionDefault
settingCustomized setting
Time elapsed before the inte-
rior lights turn off 15 secondsOff
O–OO
7. 5 s e c o n d s
30 seconds
Time elapsed before the exte-
rior lights turn off15 seconds
Off
O–OO7. 5 s e c o n d s
30 seconds
Operation after the power
switch is turned offOnOff–––O
Operation when the doors
are unlocked with the Smart
entry & start system or the
wireless remote control func-
tion or the mechanical key
*
OnOff–––O
1234
CT200h_OM_OM76135E_(EE).book Page 593 Friday, May 30, 2014 1 1:14 AM

5959-2. Customization
CT200h_OM_OM76135E_(EE)
9
Vehicle specifications
*1: Settings that can be changed on vehicles with the tachometer
*2: The default setting varies according to countries.
*3: If equipped
*4: Some status screens cannot be registered (indicated on the multi-information display)
*5: 2 of the following items: current fuel consumption, average fuel economy (after reset),
average fuel economy (after refuel), average fuel economy (after start), average vehi-
cle speed (after reset), average vehicle speed (after start), distance (driving range),
distance (after start), elapsed time (after reset), elapsed time (after start), blank
Unitskm
(L/100km)km (km/L)–OOOmiles (MPG)*3
switch settings*3Drive
information 1Desired status screen
*4–OOO
Drive information 1*3
Current fuel
consumption
*5–OOOAverage fuel
consumption (after reset)
Drive information 2*3
Cruising range/
Distance
*5–OOOAverage speed (after reset)
Pop-up display*3OnOff–OOO
Accent color*3BlueBrownOOOO
Sensitivity of the ambient light
sensor used for dimming the
meter light etc.
*3Standard-2 to 2–––O
Sensitivity of the ambient light
sensor used for brightening
the meter light etc.
*3Standard-2 to 2–––O
FunctionDefault settingCustomized setting1234
CT200h_OM_OM76135E_(EE).book Page 595 Friday, May 30, 2014 1 1:14 AM