2014 Lexus CT200h stop start

2424-5. Using the driving support systems
CT200h_OM_OM76135E_(EE)
Hill-start assist control
To engage hill-start assist control, fur-
ther depress the brake pedal when the
vehicle is stopped completely.
A buzzer will sound once to indicate the
system is activated. The slip indicator
will also start flashing.
■Hill-start assist control operating conditions
●The system operates in the following situations:
• The shift position is in a position other than P.
• The parking brake is not applied.
• The accelerator pedal is not depressed.
●Hill-start assist control cannot be operated wh ile the slip indicator light is illuminated.
■Hill-start assist control
●While hill-start assist control is operating, the brakes rema in automatically applied after
the driver releases the brake pedal. The stop lights and the high mounted stoplight turn
on.
●Hill-start assist control operates for about 2 seconds after the brake pedal is released.
●If the slip indicator does not flash and the buzzer does not sound when the brake pedal
is further depressed, slightly reduce the pressure on the brake pedal (do not allow the
vehicle to roll backward) and then firmly depr ess it again. If the system still does not
operate, check if the operating conditions explained above have been met.
■Hill-start assist control buzzer
●When hill-start assist control is activated, the buzzer will sound once.
●In the following situations, hill-start assist control will be canceled and the buzzer will
sound twice.
• No attempt is made to drive the vehicle wi thin approximately 2 seconds of releasing
the brake pedal.
• Push the P position switch.
• The parking brake is applied.
• The brake pedal is depressed again.
• The brake pedal has been depressed for more than approximately 3 minutes.
Assists with starting off and temporarily maintains braking power even if the
foot is removed from the brake pedal when starting off on an incline or a slip-
pery slope.
CT200h_OM_OM76135E_(EE).book Page 242 Friday, May 30, 2014 1 1:14 AM

3925-21. Bluetooth® (Lexus Display Audio System)
CT200h_OM_OM76135E_(EE)
XIn other situations
Even though all conceivable measures have been taken, the symptom status does not
change.
The cellular phone is not close enough to this system.
→ Bring the cellular phone closer to this system.
The cellular phone is the most likely cause of the symptom.
→Turn the cellular phone off, remove and reinstall the battery pack, and then
restart the cellular phone.
→ Enable the cellular phone’s Bluetooth
® connection.
→ Stop the cellular phone’s security software and close all applications.
→ Before using an application installed on the cellular phone, carefully check its
source and how its operation might affect this system.
CT200h_OM_OM76135E_(EE).book Page 392 Friday, May 30, 2014 1 1:14 AM

4146-1. Using the air conditioning system and defogger
CT200h_OM_OM76135E_(EE)
■Registering air conditioning settings to electronic keys (vehicles with a smart entry &
start system)
●Unlocking the vehicle using an electronic key and turning the power switch to ON
mode will recall that key’s regist ered air conditioning settings.
●When the power switch is turned off, the cu rrent air conditioning settings will automati-
cally be registered to the electronic key that was used to unlock the vehicle.
The system may not operate correctly if more than one electronic key is in the vicinity or
if the smart entry & start system is used to unlock a passenger door.
Settings for the electronic key and the corresponding door can be changed.
Contact any authorized Lexus dealer or repa irer, or another duly qualified and equipped
professional.
■Using automatic mode
Fan speed is adjusted automatically according to the temperature setting and the ambi-
ent conditions.
Therefore, the fan may stop for a while until wa rm or cool air is ready to flow immediately
after the “AUTO” button is pressed or “AUTO” is selected.
■Fogging up of the windows
●The windows will easily fog up when the humidity in the vehicle is high. Pressing “A/C”
button or selecting “A/C” will dehumidify th e air from the outlets and defog the wind-
shield effectively.
●If you turn “A/C” off, the windows may fog up more easily.
●The windows may fog up if the recirculated air mode is used.
■Windshield fog detection function (if equipped)
When automatic mode is set, the humidity sensor ( →P. 416) detects fog on the wind-
shield and controls the air conditioning system to prevent fog.
■Outside/recirculated air mode
●When driving on dusty roads such as tunnels or in heavy traffic, set to
the recirculated air mode. This is effective in preventing outside air from entering the
vehicle interior. During cooling operation, setting the recirculated air mode will also
cool the vehicle interior effectively.
●Outside/recirculated air mode may automatically switch depending on the tempera-
ture setting or the inside temperature.
CT200h_OM_OM76135E_(EE).book Page 414 Friday, May 30, 2014 1 1:14 AM

4216-1. Using the air conditioning system and defogger
CT200h_OM_OM76135E_(EE)
6
Interior features
■Registering air conditioning settings to elec tronic keys (vehicles with a smart entry &
start system)
●Unlocking the vehicle using an electronic key and turning the power switch to ON
mode will recall that key’s regist ered air conditioning settings.
●When the power switch is turned off, the cu rrent air conditioning settings will automati-
cally be registered to the electronic key that was used to unlock the vehicle.
The system may not operate correctly if more than one electronic key is in the vicinity or
if the smart entry & start system is used to unlock a passenger door.
Settings for the electronic key and the corresponding door can be changed.
Contact any authorized Lexus dealer or repa irer, or another duly qualified and equipped
professional.
■Using automatic mode
Fan speed is adjusted automatically according to the temperature setting and the ambi-
ent conditions.
Therefore, the fan may stop for a while until wa rm or cool air is ready to flow immediately
after the “AUTO” button is pressed.
■Fogging up of the windows
●The windows will easily fog up when the humidity in the vehicle is high. Pressing “A/C”
button on will dehumidify the air from the ou tlets and defog the windshield effectively.
●If you turn “A/C” off, the windows may fog up more easily.
●The windows may fog up if the recirculated air mode is used.
■Windshield fog detection function (if equipped)
When automatic mode is set, the humidity sensor ( →P. 423) detects fog on the wind-
shield and controls the air conditioning system to prevent fog.
■Outside/recirculated air mode
●When driving on dusty roads such as tunnels or in heavy traffic, set to
the recirculated air mode. This is effective in preventing outside air from entering the
vehicle interior. During cooling operation, setting the recirculated air mode will also
cool the vehicle interior effectively.
●Outside/recirculated air mode may automatically switch depending on the tempera-
ture setting or the inside temperature.
CT200h_OM_OM76135E_(EE).book Page 421 Friday, May 30, 2014 1 1:14 AM

507
8When trouble arises
CT200h_OM_OM76135E_(EE)
8-1. Essential informationEmergency flashers ................. 508
If your vehicle has to be stopped in an
emergency.................................509
8-2. Steps to take in an emergency If your vehicle needs to be towed ............................................ 510
If you think something is wrong .............................................514
If a warning light turns on or a warning buzzer
sounds........................................... 515
If a warning message is displayed.......................................521
If you have a flat tire (vehicles with a spare tire) ...................... 539
If you have a flat tire (vehicles without a spare tire) ................ 551
If the hybrid system will not start ............................................... 563
If the electronic key does not operate properly .....................565
If the 12-volt battery is discharged ................................. 567
If your vehicle overheats ........... 571
If the vehicle becomes stuck ............................................. 575
CT200h_OM_OM76135E_(EE).book Page 507 Friday, May 30, 2014 1 1:14 AM

5178-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
8
When trouble arises
Slip indicator light Indicates a malfunction in:
• The VSC system;
• The TRC system; or
• The hill-start assist control system
The light will flash when the above systems and/or ABS are operat-
ing.
→ Have the vehicle inspected by any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional
immediately.
(If equipped)
Automatic headlight leveling system warning light
Indicates a malfunction in the au tomatic headlight leveling system
→ Have the vehicle inspected by any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional
immediately.
High coolant temperature warning light
Changes from a flashing to a solid light when the engine coolant
temperature increases
→ Stop and check. ( →P. 5 7 1 )
Open door warning light (warning buzzer)*2
Indicates that a door is not fully closed
→ Check that all the doors are closed.
Low fuel level warning light
Indicates that remaining fuel is approximately 6.8 L (1.8 gal., 1.5
Imp.gal.) or less
→ Refuel the vehicle.
Driver’s and front passenger’s seat belt reminder light (warning
buzzer)
*3
Warns the driver and/or front passenger to fasten their seat belts
→ Fasten the seat belt.
If the front passenger’s seat is occupied, the front passenger’s
seat belt also needs to be fastened to make the warning light
(warning buzzer) turn off.
Rear passengers’ seat belt reminder lights (warning buzzer)*4
Warns the rear passengers to fasten their seat belts in the following
situations:
• A rear door is opened and closed.
*5
• A rear passenger fastens their se at belt and then unfastens it.
→ Fasten the seat belt.
Master warning light
A buzzer sounds and the warning light comes on and flashes to
indicate that the master warning system has detected a malfunc-
tion.
→ P. 5 2 1
Warning lightWarning light/Details/Actions
CT200h_OM_OM76135E_(EE).book Page 517 Friday, May 30, 2014 1 1:14 AM

5258-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
8
When trouble arises
Indicates that the accelerator pedal is depressed to stop
the vehicle on an upward slope etc. A buzzer also sounds.
If this continues, the hybrid system may overheat.
→ Release the accelerator pedal and depress the
brake pedal.
Indicates that the traction battery power has dropped
because a long period of time has elapsed after shifting
the shift position to N
A buzzer also sounds.
→ Restart the hybrid system when starting the vehicle.
Wa r n i n g m e s s a g eDetails/Actions
(Flashes)
(Flashes)
CT200h_OM_OM76135E_(EE).book Page 525 Friday, May 30, 2014 1 1:14 AM

5668-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
■Stopping the hybrid system
Set the parking brake, shift the shift position to P and press the power switch as you nor-
mally do when stopping the hybrid system.
■Replacing the key battery
As the above procedure is a temporary measure, it is recommended that the electronic
key battery be replaced immediately when the battery is depleted. (→P. 4 8 3 )
■Alarm (if equipped)
Using the mechanical key to lock the doors will not set the alarm system.
If a door is unlocked using the mechanical key when the alarm system is set, the alarm
may be triggered. ( →P. 8 5 )
■Changing power switch modes
Within 10 seconds of the buzzer sounding, release the brake pedal and press the power
switch.
The hybrid system does not start and modes will be changed each time the switch is
pressed. ( →P. 1 7 8 )
WA R N I N G
■When using the mechanical key and operating the power windows
Operate the power window after checking to make sure that there is no possibility of
any passenger having any of their body parts caught in the window.
Also, do not allow children to operate the mechanical key. It is possible for children and
other passengers to get caught in power window.
CT200h_OM_OM76135E_(EE).book Page 566 Friday, May 30, 2014 1 1:14 AM