25ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
SEATING
Driver Position Memory System*
To store a seating position into memory, first place the gear shifter into P (Park) while the ignition switch is on Then:
1 Adjust the driver’s seat and outside rearview mirror
2 Press the SET button A on the control panel System
will beep once
3 Press one of the memory buttons B within 5
seconds The system will beep twice when memory
has been stored
1
SET 2
Seat Warmers/Ventilated Seats*
Press button once for high setting (3 LEDs lit) Press button
twice for medium setting (2 LEDs lit) Press button a third
time for low setting (1 LED lit) and again to turn OFF
Seat Warmers – Press right side of button once for high
setting (3 LEDs lit) Press button twice for medium setting
(2 LEDs lit) Press a third time for low setting (1 LED lit) and
again to turn OFF
Ventilated Seats – Press left side of button once for high
setting (3 LEDs lit) Press twice for medium setting (2 LEDs
lit) Press a third time for low setting (1 LED lit) and again to
t u r n O F F
Seat Warmers only*Seat Warmers/Ventilated Seats*
Warming ( Ye l l o w L E D)Ventilating (Blue LED)
With the seat warmer switch in the ON position, the heating system in the seat turns OFF or ON automatically depending on the seat temperature
QUICK TIPS
AB
Hig h Med iu m Lo wH ig h Med iu m Lo w
