OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
18
*IF EQUIPPED
Blind Spot Detection / Lane Change Assist
1st-stage alert: When another vehicle is detected within the
BSD System boundary, a yellow light will illuminate on the
outside rearview mirrors.
2nd-stage alert: When 1st-stage alert is on and a turn signal is
turned on, the 2nd-stage alert will sound.
RCTA (Rear Cross Traffic Alert)
When the vehicle is in Reverse and moves backwards from a
parking position, the sensor detects approaching vehicles on
the left or right side.Blind Spot Detection (BSD) System* The BSD system uses radar sensors to help alert the
driver while changing lanes or while in Reverse moving
backwards.
When the BSD button is pressed ON, the BSD indicator
on the button
A
will illuminate. The outside rearview
mirror warning lights will also illuminate for 3 seconds.
The system will become active when the vehicle is
traveling more than 18 mph and will alert the driver if
another vehicle is detected by the radar sensor.
A
Blind Spot Detection
System Video
To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.www.KuTechVideos.com/tf23/2014
REMINDER:
OThe BSD system will not show a warning if the vehicle speed is only 6 mph above the surrounding vehicles
OWhen the BSD is ON and the ignition is cycled to OFF then ON again, the BSD system returns to ON
OThe RCTA feature can be turned OFF/ON in User Settings
For more information on the Blind Spot Detection System, please refer to the Owner’s Manual.
QUICK TIPS
DRIVER’S PANEL
( Buttons are located lef t of the Steering Wheel)
