2014 KIA CADENZA key

56
Device Information
Press ▶ Press
Bluetooth ▶ Press
Advanced Settings ▶ Press
Device Information .
• This feature allows you to check
device information.
Adjusting the Ring/Call Volume
While on a call ▶ Use the VOL
knob on the head unit or the
VOL + , VOL - keys on the
steering wheel remote controller to
adjust the ring/call volume.
0[미국_영어]AVN.indb 562013-03-18
Bluetooth® Handsfree

57
Setting Mic Volume
While on a call ▶ Press the
Outgoing Vol. ▶ Set Outgoing
Volume ▶ Press OK.
If you press the Mute button, the
outgoing volume is muted and blocked
to the other party.
Restore Factory Settings
Press the key
▶ Press
Setup ▶ Press Bluetooth ▶
Press
Advanced Settings ▶ Press
Restore Factory Settings .
0[미국_영어]AVN.indb 572013-03-18
Bluetooth® Handsfree

58
Starting Voice
Recognition
Starting Voice Recognition
Shortly press the key on the
steering wheel remote controller
(under 0.8 seconds) ▶ Say a
command.
Once voice recognition starts, the voice
command entry window and the six rep -
resentative commands are displayed.
• If voice recognition is in [Normal
Mode], then the system will say
“Please say a command after the
beep,” followed by a beep tone.
• If voice recognition is in [Expert
Mode], then you will only hear a
beep a “Beep~”.
Skipping Prompt Messages
While prompt message is being
stated ▶ Shortly press the
key on
the steering wheel remote controller.
(under 0.8 seconds
)
The prompt message is immediately
ended and the beep tone will sound.
After the “beep”, say the voice command.
Re-starting Voice Recognition
While system waits ▶ Shortly press
the
key on the steering wheel
remote controller. (under 0.8 seconds)
The command wait state will end and
the beep tone will sound. After the
“beep”, say the voice command.
0[미국_영어]AVN.indb 582013-03-18
Voice Recognition

59
Ending Voice
Recognition
While Voice Recognition is operating
▶ Press and hold the
key on
the steering wheel remote controller.
(over 0.8 seconds)

While using voice recognition, press -
ing a steering wheel remote control or
a different key will end voice recogni -
tion.

Illustration on Using
Voice
Recognition
(Setting Home as the
Destination)
Press the key. (under 0.8 seconds)
The system awaits for your command
and display a list of accessible com -
mands on the screen.
Destination
Please say a command
after the beep
BEEP
DestinationPlease say a command after the beep
Go Home
BEEP
0[미국_영어]AVN.indb 592013-03-18
Voice Recognition