2014 INFINITI QX80 Quick Reference Guide

23
DIALING A CONTACT USING VOICE RECOGNITION
To make a call using voice recognition, follow

this procedure:
1.


Press the button on the steering wheel.

After the tone, say “PHONE”
2.


After the system confirms your command, wait for the

tone and say “Phonebook”.
3.


The system will prompt you to speak a name. After the tone, say a name f\
rom your

phonebook. Be aware that for some phones it will be necessary to say the\
name in the last
name, first name format.
4.


The system will give you a list of close matches. After the tone, select\
the correct match by

saying the number next to the correct match.
5.


The system will confirm your selection. After the tone, say “Dial”\
.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang-up, press the button or touch the
“Hang up” key.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
1591592_14b_Infiniti_QX80_QRG_093013.indd 239/30/13 9:36 AM

24
system guide
Navigation System
01 Destination (DEST) - Press to enter a destination
02 INFINITI controller
•


Slide or rotate to highlight an item on the screen and press
ENTER to select the
highlighted item.
•


On the map screen turn to adjust the map scale.
•


To scroll the map, slide the INFINITI controller in the direction you wa\
nt to scroll.
03 Information (INFO) - Press to display the vehicle, traffic (if so equipped), weather
(if so equipped) or voice recognition information.
04 SETTING - Press to access the system settings.
05 ROUTE - Press to access the guidance control functions such as guidance cance\
llation,
route priority, and waypoint settings on the route.
06 MAP - Press to display the map. While following a programmed route, press m\
ultiple times
to change the type of route information.
07 BACK - Press to return to the previous screen. In a settings screen, this bu\
tton can also
be used to apply the setting. In a character input screen, this button c\
an also delete the
characters that have been entered.
08 VOICE - Press to hear the current voice guidance for a programmed route.
09 STATUS - Press multiple times to display audio information, the air conditione\
r status,
fuel economy or navigation directions.
10 OFF - Press to switch between the day screen (bright) and the night scree\
n (dark).

Press and hold the button to turn the display off. Press again to turn t\
he display on.
For more information, please refer to your Navigation System Owner’s \
Manual.
01
06
0708
05
02
03
09
04
10
1591592_14b_Infiniti_QX80_QRG_093013.indd 249/30/13 9:36 AM

25
HomeLink® Universal Transceiver
The HomeLink system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage

doors, property gates, outdoor and indoor lights
or alarm systems.
To program the HomeLink® Universal Transceiver:



•


Position the handheld transceiver 1-3 in (26-76
mm) away from the HomeLink surface, keeping
the HomeLink indicator light in view.



•


Press and hold the desired HomeLink button and the handheld transmitter \
button
simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.



•


Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink and ob\
serve the
indicator light:



•

A solid continuous light indicates the programing is complete and the Ho\
meLink button
will activate your device.



•

A blinking light that turns to a solid continuous light after 2 seconds \
indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:



•

At the receiver of the device that you are programing to the HomeLink, p\
ress and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.



•

Press and hold the programmed HomeLink button for 2 seconds and release.\
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programming
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
HOMELINK
1591592_14b_Infiniti_QX80_QRG_093013.indd 259/30/13 9:36 AM

This Quick Reference Guide is intended to provide an overview of some of\
the unique features
of your new vehicle. See your Owner’s Manual, which contains importan\
t safety warnings and
information about the operation and maintenance of your vehicle, for com\
plete details. Nissan
North America, Inc. reserves the right to make changes, at any time, wit\
hout prior notice, in prices,
colors, materials, equipment, specifications, and models and to disconti\
nue models or equipment.
Due to continuous product development and other pre- and post-production\
factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with opti\
onal equipment. See
the actual vehicle for complete accuracy. Specifications, options and ac\
cessories may differ in
Hawaii, U.S. territories and other countries. For additional information\
on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America,\
Inc.
Printing: October 2013 (07) / QR14E 0Z62U1 / Printed in USA
To view detailed instructional videos,
go to www.infinitiownersinfo.mobi/2014/qx80
or snap this barcode with an appropriate
barcode reader.
1591592_14b_Infiniti_QX80_QRG_093013.indd 29/30/13 9:34 AM