2014 INFINITI QX70 light

13
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 MPH
(40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the CRUISE
ON/OFF switch
01. The CRUISE indicator light in
the instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch

02 and release. The CRUISE SET indicator light
in
the instrument panel will illuminate. Take your foot off the accelerator\
pedal. Your vehicle will
maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03. When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch
02. Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch
04.
To turn off cruise control, push the CRUISE ON/OFF switch
01. Both the CRUISE indicator
light and the SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
0304
USB/iPod® Interface
The USB jack
01 is located in the center console

under the arm rest.
When a compatible USB memory device or iPod® is

plugged into the USB jack, compatible audio and video
files stored on the device can be played
through the vehicle’s audio system and
front display.
For more information, refer to the “Monitor, climate, audio, phone
and voice recognition systems (section 4)” of your Owner’s Manual.01
1354681_14a_Infiniti_QX70_QRG_052813.indd 135/28/13 12:00 PM

14
Intelligent Cruise Control (ICC) System (if so equipped)
vEHICLE-TO-vEHICLE DISTANCE CONTROL MODE
To set v ehicle-To- v ehicle Distance Control mode,



press the
CRUISE ON/OFF button
01 for less

than 1.5 seconds. The
CRUISE indicator light
02
will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch
03 and release
it. Cruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.
When a vehicle is not detected ahead of you in the



lane, the set distance and set vehicle speed indicator




lights will illuminate 05 in set mode.
When a vehicle is detected ahead of you in the lane,




the vehicle ahead detection, set distance,
and set



vehicle speed indicator lights will illuminate 06 in set mode.
To reset at a faster cruising speed, push and hold the
ACCEL/RES
switch
07. When the vehicle attains the desired speed, release



the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch
03. Release



the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will go out.
To turn off cruise control, press the
CRUISE ON/OFF button
01. The CRUISE indicator light

02 , in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:
While cruise control is off, press the CRUISE ON/OFF
button
01 and hold it down for more
than 1.5 seconds. The
CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.



Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off\
, and then turn it on



again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
first drive features
0807
0304
01
0205
06
1354681_14a_Infiniti_QX70_QRG_052813.indd 145/28/13 12:00 PM

21
Navigation System (if so equipped)
Your Navigation System can calculate a route from the current location t\
o a preferred destination.



The real-time map display and turn-by-turn voice guidance will lead you \
along the route.
The Navigation System will continually update your vehicle’s position\
. If you have deviated




from the original route, it will recalculate the route from your current\
location.
01 Touch screen display
02 DEST button – Press to enter a destination.

03 STATUS button – Press multiple times to display audio information with eith\
er the air

conditioner status, fuel economy or navigation directions.
04 ZOOM OUT button – Press to zoom the map out.

05 ROUTE button – Press to access the guidance control functions (guidance c\
ancellation, route

priority, waypoint setting on the route, etc.).
06 INFINITI Controller

•
ENTER
button – Press to select the highlighted item on the screen. If this\
button is
pressed while a map is displayed, the map menu screen is displayed.
• Main directional buttons – Use to move across the map, highlight an i\
tem on the screen or





adjust a setting (volume, brightness, etc.).


• Additional directional buttons – Use to move across the map or highli\
ght an item on the



character input screen.


• Center dial – Use to highlight an item on the screen or adjust a sett\
ing. The center dial can



also be used to adjust the map scale.
01
04
09
02
05
10
12
06
03
07
11
08
13
1354681_14a_Infiniti_QX70_QRG_052813.indd 215/28/13 12:01 PM

23
HOMELINK®
HomeLink® Universal Transceiver
The HomeLink® system can learn and consolidate the functions of up to three different\

hand-held transmitters, operating items such as garage doors, property g\
ates, outdoor
and indoor lights or alarm systems.
To program the Homelink® Universal Transceiver:
•
Position


the

handheld

transceiver 1-3 in (26-76 mm) away from the Homelink
®
surface, keeping the Homelink® indicator light in view.
•
Press


and

hold

the

desired

Homelink
® button and the handheld transmitter button
simultaneously until the Homelink® indicator light flashes slowly and then rapidly.
•
Both


buttons

may

be

released

when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the Homelink® and observe the
indicator light:
•
A


solid

continuous

light

indicates

the

programing

is

complete

and the Homelink
®
button will activate your device.
•
A


blinking

light

that

turns

to

a

solid

continuous

light

after

2

seconds

indicates

additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:
•
At

the receiver of the device that you are programing to the Homelink
®, press and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You
have approximately 30 seconds to initiate the following step.
•
Press


and

hold

the

programmed

Homelink
® button for 2 seconds and release.
Repeat the previous 2 steps up to 3 times to complete the programming pr\
ocess.
Homelink® should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website
at www.homelink.com or call 1-800-355-3515.
1354681_14a_Infiniti_QX70_QRG_052813.indd 235/28/13 12:01 PM