2014 INFINITI QX60 alarm

3
Alarm Notification – This system will notify you when the factory-ins\
talled vehicle alarm
system has been activated.
Scheduled Maintenance Notification – Receive scheduled maintenance no\
tifications based
on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunct\
ion that triggers
instrument panel warning lights.
Destination Assistance – Receive point-of-interest assistance via gui\
ded IV R (Interactive
Voice Response), or Response Specialist by pressing the
key on the map screen, or
Infiniti Connection™ web portal.
Destination Send-to Vehicle – Find and download point-of interest inf\
ormation from



Google Maps™.
Connected Search – Select “Connected Search” from the Destinati\
on menu on the vehicle’s
navigation system to conduct a point-of-interest search within a certain\
distance of the
vehicle’s location.
Drive Zone – Monitor the movement of your vehicle within a specified \
region. Set up
boundaries in the Monitoring section of the Infiniti Connection™ web portal.
Max Speed Alert – Set up a maximum speed on the Infiniti Connection™ web portal. you will
receive notifications if your vehicle exceeds the max speed setting.
Mobile Information Service – Receive the latest news headlines, stock\
quotes and sports
scores by setting up preferences on the Mobile Information Service page \
in the Infiniti
Connection
™ web portal.
Valet Alert – Use Valet Alert to set up a 0.2 mile radius around your\
vehicle.

•
Activate alerts by pressing the “Connect to Voice Menu” button on \
the Infiniti
Connection™ screen or by pressing the key on the map screen.
•
At the prompt, say “Valet Alert” and then “Activate” or “\
Deactivate”.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 310/9/13 11:08 AM

LIFTGATE RELEASE
To open the rear liftgate, press the button
05 for longer than 1 second.
To close the rear liftgate, press the
button
05 again for longer than 1 second.
PANIC ALARM
The Intelligent Key can also be used to activate the panic alarm by pres\
sing and holding
the
button
06 for more than 1 second. Once activated, the panic alarm and headlights \
will stay on for a period of time.
INTELLIGENT KE
y
BATTER y DISCHARGE
If the battery of the Intelligent Key is discharged,
or environmental conditions interfere with the
Intelligent Key operation, start the engine according
to the following procedure:
1.


Move the shift lever to the
P (P ARK ) position.



2.

Firmly apply the foot brake.




3.

Touch the ignition switch with
the Intelligent
Key and a chime will sound.



4.

Within 10 seconds after the chime sounds, push the ignition switch while\
depressing
the

brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and
the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
12
first drive features
Power Liftgate
When the liftgate is closed and locked, the
liftgate will open automatically by:

•
Pushing the power liftgate switch
01 on the instrument panel.
•
Pushing the liftgate opener switch 02, the
liftgate must be unlocked, or you must have the
Intelligent Key with you (in your pocket or purse).
•


Pressing the
button
03 on the INFINITI
Intelligent Key for more than 1 second.
The power liftgate operation can be
turned on or off by the power liftgate main
switch
04 on the instrument panel.


•
When the power liftgate main switch is pushed

to the OFF position, power operation is not
available using the power liftgate switch on the
liftgate
05 or the liftgate opener switch
02.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
0401
02
05
03
1591599_14b_Infiniti_QX60_QRG_100913.indd 1210/9/13 11:09 AM

25
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
S
y
STEM OPERATING TIPS
Press the or button to interrupt the voice

prompts at any time and speak a command after
the tone.
The “Help” command can be used to hear a list of
available commands at any time.

Reduce background noise as much as possible by
closing windows and pointing HVAC vents away from
the ceiling.
Speak naturally without long pauses and without
raising your voice.
When speaking phonebook names, please be aware
some phones require the last name to be s
poken
before the first name. For example, “Michael Smith”
may be spoken as “Smith Michael”.
To cancel a Voice Recognition session, say “Cancel” or
“Quit” or press and hold the

or
button for 5 seconds.
To go back to the previous command, say “Go back” or “Correctio\
n”.

If the Voice Recognition system does not recognize your voice commands, \
train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit ww.InfinitiUSA.com/bluetooth.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Bluetooth® Controls
Microphone
SETTINGS
The setting mode allows you to change the information displayed in the v\
ehicle
information display:
Driver Assistance (if so equipped)
Main Menu Selection Body Color Maintenance Alarms
Vehicle Settings
Language Unit Welcome Effects
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2510/9/13 11:09 AM

HomeLink® Universal Transceiver
The HomeLink system can learn and consolidate the functions of up to 3 d\
ifferent hand-
held transmitters, operating items such as garage doors, property gates,\
outdoor and
indoor lights or alarm systems.
To program the HomeLink® Universal Transceiver:
•
Position


the

handheld

transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the HomeLink indicator light in view.


•
Press


and

hold

the

desired HomeLink button and the handheld transmitter button

simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.


•
Both


buttons

may

be

released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink button\
and observe the
indicator light:

•
A
solid continuous light indicates the programing is complete and the HomeLink button
will activate your device.
•
A

blinking light that turns to a solid continuous light after 2 seconds indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:

•
At
the receiver of the device that you are programing to the HomeLink button, press and
release the learn or smart button (the name may vary by manufacturer, b\
ut it is usually
located near where the hanging antenna wire is attached to the unit).
y ou have
approximately 30 seconds to initiate the following step.
•
Press

and hold the programed HomeLink button for 2 seconds and release.
y ou may have to repeat the previous 2 steps up to 3 times to complete the\
programing
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website
at www.homelink.com or call 1-800-355-3515.
HOMELINk
32
system guide
1591599_14b_Infiniti_QX60_QRG_100913.indd 3210/9/13 11:09 AM