2014 INFINITI QX50 light

9
Windshield Wiper and Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIS t ) - One sweep operation of the
front wipers.
02 Intermittent (IN t ) - Operates the speed-sensing
front wipers intermittently. The intermittent
operation speed can be adjusted by twisting
the time control ring
03 towards you to

decrease wiper delay.
04 Low (LO) - Front wipers operate at a continuous
low-speed.
05 High ( h I) - Front wipers operate at a continuous
high-speed.
06 Front w asher
- Pull the lever toward you to

activate the front washer. The front wipers will
operate several times.
REAR
w
INDSHIELD
w
IPER AND w ASHER
07 Intermittent (IN t ) - Rear wiper operates
intermittently.
08 Low (ON) - Rear wiper operates at a continuous
low-speed.
09 Rear w asher
- Push the lever forward to

activate the rear washer. The rear wiper will
operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
FOG LIGHT SwITcH
The headlights must be in the auto, or the low
beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the
OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
06
INt
ON
MISt
OFF
IN

t
LO
h

I01
02
06
07
04
09
08
05
03
1378280_14a_Infiniti_QX50_QRG_060613.indd 96/6/13 10:21 AM

11
07 INt A ke AI r CON tr OL B utt ON



AIR RE
c IR c ULATION
Press the intake air control button
to recirculate interior air inside the vehicle. The indicator

light on the
side will come on. This system is used to avoid outside odors and helps\
to
adjust the inside vehicle temperature more effectively.
The air recirculation mode cannot be activated when the air conditioner \
is in the front
defrosting mode
or front defrost and foot vent mode .



OUTSIDE AIR

c
IR
c
ULATION
Press the intake air control button again to draw outside air into the p\
asse nger
compartment. The indicator light on the
side will come on.



AUTOMATI

c
INTAKE AIR
c
ONTROL
In the auto mode, the intake air will be controlled automatically. To ma\
nually control the
intake air, press the intake air control button. To return to the automa\
tic control mode,
press the intake air control button for about 2 seconds.
08 A/C B
utt ON
Press the
A/C button to turn the air conditioner system on or off. This system helps \
cool
and dehumidify the air inside the cabin and defog the windows.
09 OFF B utt ON
Press the
OFF button to turn the climate control system off.
For more information, refer to the “Instruments and controls (section 2)” and the “Monitor, climate, audio, phone and voice recognition
systems (section 4)” of your Owner’s Manual.
1378280_14a_Infiniti_QX50_QRG_060613.indd 116/6/13 10:21 AM

13
USB/iPod® Interface
The USB jack 01 is located in the center console
under the armrest.
w hen a compatible USB memory device or iPod® is
plugged into the USB jack, compatible audio and
video files stored on the device can be
played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio,
phone and voice recognition systems (section 4)” of your
Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 MPH (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/
OFF switch
01 . The CruISe indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push\
the COAS t /
S
et switch

02 and release. The C ru IS e S et indicator light
in the instrument panel will
illuminate. Take your foot off the accelerator pedal. Your vehicle will \
maintain the set speed.
To reset at a faster cruising speed, push and hold the ACC e L/ re S switch
03 . when the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAS t /S et switch
02 . Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANC e L switch
04 .
To turn off cruise control, push the ON/OFF switch
01 . Both the CruISe indicator light and
the S
et
indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
04
03
02
01
01
1378280_14a_Infiniti_QX50_QRG_060613.indd 136/6/13 10:21 AM

14
first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
VEHIcLE-TO-VEHIcLE DISTANcE cONTROL MODE
To set Vehicle-To-Vehicle Distance c ontrol mode,
press the C
ru IS e ON/OFF button
01 for less
than 1.5 seconds. The C
ru
IS
e
indicator light
02
will illuminate.
Accelerate to the desired speed.
Push down on the COAS t /S et switch
03 and release
it.
c
ruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.
w hen a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate
05 in set mode.

w hen a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance, and set
vehicle speed indicator lights will illuminate
06 in set mode.
To reset at a faster cruising speed, push up and hold the
ACC e L/ re S
switch
07 . when the vehicle attains the desired speed, release
the switch.
To reset at a slower cruising speed, push down and hold the COAS t /S et switch
03 . Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANC e L switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will go out.
To turn off cruise control, press the
C ru IS e ON/OFF button
01 . The CruISe indicator
light
02 , in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:
w hile cruise control is off, press the C ru IS e ON/OFF
button
01 and hold it down for more
than 1.5 seconds. The C
ru
IS
e
indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAS t /S et switch and release it. The S
et indicator light will illuminate.
c

ruise control should be set to the desired speed.
To switch between the two cruise control modes:
w hen one of the two cruise modes is in use, you must turn the system off,\
and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
08
07
03
01
04
0205
06
1378280_14a_Infiniti_QX50_QRG_060613.indd 146/6/13 10:21 AM

21
Navigation System (if so equipped)
Your Navigation System can calculate a route from the current location t\
o a preferred destination.
The real-time map display and turn-by-turn voice guidance will lead you \
along the route.
The Navigation System will continually update your vehicle’s position\
. If you have deviated
from the original route, it will recalculate the route from your current\
location.
01 Touch screen display
02 D e S t button – Press to enter a destination.
03 St A tu S button – Press multiple times to display audio information with eith\
er the air

conditioner status, fuel economy or navigation directions.
04 ZOOM O ut button – Press to zoom the map out.
05 r O ute button – Press to access the guidance control functions (guidance c\
ancellation, route

priority, waypoint setting on the route, etc.).
06 INFINITI c ontroller
•

e
N ter button – Press to select the highlighted item on the screen. If this\
button is
pressed while a map is displayed, the map menu screen is displayed.
•
Main


directional

buttons

–

Use

to

move

across

the

map,

highlight

an

item

on

the

screen

or
adjust a setting (volume, brightness, etc.).


•
Additional
directional buttons – Use to move across the map or highlight an item on the

character input screen.


•
Center
dial – Use to highlight an item on the screen or adjust a setting. The center dial can

also be used to adjust the map scale.
01
04
09
02
05
10
12
06
03
07
11
08
13
1378280_14a_Infiniti_QX50_QRG_060613.indd 216/6/13 10:22 AM

23
HomeLink® Universal Transceiver
The HomeLink® system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage doors,
property gates, outdoor and indoor lights or
alarm systems.
To program the Homelink® Universal Transceiver:
•
Position


the

handheld

transceiver 1-3 in (26-76
mm) away from the Homelink® surface, keeping the Homelink® indicator light in view.
•
Press


and

hold

the

desired

Homelink
® button and the handheld transmitter button
simultaneously until the Homelink® indicator light flashes slowly and then rapidly.
•
Both


buttons

may

be

released

when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the Homelink® and observe the
indicator light:
•
A


solid


continuous


light


indicates


the


programing


is


complete


and

the

Homelink® button
will activate your device.
•
A


blinking

light

that

turns

to

a

solid

continuous

light

after

2

seconds

indicates

additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:

•
At
the receiver of the device that you are programing to the Homelink
®, press and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.
•
Press


and

hold

the

programmed

Homelink
® button for 2 seconds and release.
Repeat the previous 2 steps up to 3 times to complete the programming pr\
ocess.
Homelink® should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
HOMELINK®
1378280_14a_Infiniti_QX50_QRG_060613.indd 236/6/13 10:22 AM