2014 INFINITI Q70 alarm

3
Automatic Anti-glare Mirrors
The inside rearview mirror and both outside mirrors are designed to auto\
matically change
reflection according to the intensity of the headlights of the vehicle f\
ollowing you.
The anti-glare system will be automatically turned on when the ignition \
switch is in the
ON position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
My Schedule – Access your personal online Google Calendar™, hear details read via
text-to-speech** and select locations as a destination via the Navigatio\
n System.
Report Stolen v ehicle – A Response Specialist will attempt to obtain location inform\
ation
from a reported stolen vehicle and provide that information to local law\
enforcement
agencies to assist in the recovery of your stolen vehicle.
Remote d oor Lock/Unlock – Remotely access your vehicle via a Infiniti Connect\
ion
Response Specialist or designated website to remotely lock or unlock you\
r vehicle.
Alarm Notification – This system will notify you when the factory-ins\
talled vehicle alarm
system has been activated.
Scheduled Maintenance Notification – Receive scheduled maintenance no\
tifications based
on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunct\
ion that triggers
instrument panel warning lights.
d estination Assistance – Receive point-of-interest assistance via guid\
ed I v R (Interactive
v

oice Response), or a Response Specialist by pressing the
key on the map screen or the
Infiniti Connection™ web portal.
d estination Send-to v ehicle – Find and download point-of interest information from
Google Maps™.
•

To access, go to the Infiniti Connection menu and select “Sync All In\
formation Feeds”.


Then go to the Feeds menu page and download the desired destination info\
rmation.
Connected Search – Select “Connected Search” from the d estination menu on the vehicle’s
Navigation System to conduct a point-of-interest search within a certain\
distance of the
vehicle’s location. To access, go to the Infiniti Connection menu and\
select “Sync
Information Feeds”. Then go to the feeds menu page and download the d\
esired
destination information.
d rive Zone – Monitor the movement of your vehicle within a specified r\
egion. Set up
boundaries in the Monitoring section of the Infiniti Connection™ web portal.
Max Speed Alert – Set up a maximum speed on the Infiniti Connection™ web portal. You will
receive notifications if your vehicle exceeds the maximum speed setting.\
Mobile Information Service – Receive the latest news headlines, stock\
quotes and sports

scores by setting up preferences on the Mobile Information Service page \
in the Infiniti
Connection
™ web portal.
v alet Alert – Use v alet Alert to set up a 0.2 mile radius around your vehicle.
•
Activate alerts by pressing the “Connect to
v oice Menu” button on the Infiniti
Connection
™ screen or by pressing the key on the map screen.
•

At the prompt, say “

v
alet Alert” and then “Activate” or “ d eactivate”.
**Laws in some communities may restrict the use of text-to-speech. Check\
local regulations before using this feature.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
1276460_14a_Infiniti_Q70_QRG_102813.indd 310/28/13 2:30 PM

8
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent k ey system allows you to lock
or unlock your vehicle, open your trunk and start
the engine. It is important to make sure the Intelligent
k

ey is with you (that is, in your pocket or purse).
The operating range of the Intelligent k ey is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request s witch
01
once or press the
button
02 on the key fob.
To unlock the vehicle, perform one of the following procedures:

•
Push either door handle request switch
01 once; the corresponding

door will unlock. Push the door handle request switch 01 again within

1 minute; all other doors will unlock, or
•

Press the
button
03 on the key fob to unlock the driver’s side door.

Press the
button again; all other doors will unlock.
To open the trunk, press the hOLD button
04 for more than 1 second.
The Intelligent
k ey can also be used to activate the panic alarm by pressing
and holding the
button
05 for more than 1 second. Once activated, the

panic alarm and headlights will stay on for a period of time.
INTELLIGENT
k
EY BATTERY
d
ISC
h ARGE
If the battery of the Intelligent
k ey is discharged or
environmental conditions interfere with the Intelligent
k

ey operation, start the engine according to the
following procedure:



1.

Move the shift lever to the
P (P AR k) position.



2.

Firmly apply the foot brake.



3.

Touch the ignition switch with the Intelligent

k ey
and a chime will sound.



4.

w
ithin 10 seconds after the chime sounds, push the ignition switch while \
depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting a\
nd driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
01
02
03
04
05
1276460_14a_Infiniti_Q70_QRG_102813.indd 810/28/13 2:30 PM

23

HomeLink® Universal Transceiver (if so equipped)
The h omeLink system can learn and consolidate the functions of up to 3 differ\
ent
hand-held transmitters, operating items such as garage doors, property g\
ates, outdoor and
indoor lights or alarm systems.
To program the h omeLink® Universal Transceiver:
•

Position


the

handheld

transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the
h
omeLink indicator light in view.
•

Press


and

hold

the

desired HomeLink button and the handheld transmitter button
simultaneously until the
h omeLink indicator light flashes slowly and then rapidly.
•

Both


buttons

may

be

released when the indicator light flashes rapidly.
To verify the programming is complete, press and hold the h omeLink button and observe
the indicator light:
•

A
solid continuous light indicates the programming is complete, and the HomeLink button

will activate your device.


•
A
blinking light that turns to a solid continuous light after 2 seconds indicates additional
steps are required to complete the programming.
An additional person may make the remaining steps easier. To complete th\
e
programming process:
•

At
the receiver of the device that you are programming to the HomeLink button, press

and release the learn or smart button (the name may vary by manufacture\
r, but it is


usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.
•

Press
and hold the programed HomeLink button for 2 seconds and release.
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programing
process.
h omeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the homeLink website at
www.homelink.com or call
1-800-355-3515.
HOMELINK
1276460_14a_Infiniti_Q70_QRG_102813.indd 2310/28/13 2:32 PM