10
first drive features
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
01 memory.
Follow this procedure to set the memory positions:
•
Confirm
the shift lever is in the P (PAR k ) position.
•
Push
the ignition switch to the ON position.
•
Adjust the driver’s seat, steering column and outside
mirrors to the desired positions using the adjusting
switches for each feature.
•
Push the
SE t switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
•
The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
•
The
driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t k ey. To link a
memorized position to your INFINITI Intelligent k ey, press the unlock button on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
switch
01 right or left.
Adjust each mirror to the desired position using
the switch
02 .
To fold the outside rearview mirrors, push the switch
03 to the
position. To unfold the outside rearview mirrors, push the switch 03
to the position.
RE
v
ERSE TILT-
d O w N FEATURE
w hen backing up the vehicle, the right or left outside mirror can be sele\
cted to automatically
turn downward.
1.
Push the ignition switch to the
ON position.
2.
Move the shift lever to the
R (REVERSE) position.
3.
Choose the right or left outside mirror by operating the outside mirror \
control switch 01 .
4.
The outside mirror surface moves downward.
w hen one of the following conditions has occurred, the outside mirror sur\
faces will return to
their original positions.
•
The shift lever is moved to any position other than
R (REVERSE).
•
The outside mirror control switch is set to the center or (neutral) po\
sition.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
01
0203
1276460_14a_Infiniti_Q70_QRG_102813.indd 1010/28/13 2:30 PM
