Black plate (500,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
9-14Technical and consumer information
Y51D-V-E01-1683BD89-41A7-4F6C-B8FB-A0E68AF2C426
STI0722
Use the following steps to mount the
license plate:
Before mounting the license plate, confirm
that the following parts are enclosed in the
plastic bag.
Only use the recommended mounting
position, otherwise the Intelligent Cruise
Control (ICC) sensor obstruction (if so
equipped) may result.
.License plate bracket
. J-nut 62
. Screw 62
. Screw grommet 62
1. Park the vehicle on flat, level ground.
2. Locate the center position
*Aas
illustrated. Line up the license plate
bracket under the top of the front
bumper
*Bwith the tabs*C. Hold
the license plate bracket in place.
3. Mark the center of the hole
*Dwith a
felt-tip pen.
4. Carefully drill two pilot holes using a 0.39 in (10 mm) drill bit at the marked
locations. (Be sure that the drill only
goes through the bumper fascia.)
5. Insert grommets into the hole on the fascia.
INSTALLING FRONT LICENSE PLATE
Condition:
![INFINITI Q70 2014 Owners Manual Black plate (500,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
9-14Technical and consumer information
Y51D-V-E01-1683BD89-41A7-4F6C-B8FB-A0E68AF2C426
STI0722
Use the following steps to mount the
license plat](/manual-img/42/35061/w960_35061-501.png "INFINITI Q70 2014 Owners Manual Black plate (500,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
9-14Technical and consumer information
Y51D-V-E01-1683BD89-41A7-4F6C-B8FB-A0E68AF2C426
STI0722
Use the following steps to mount the
license plat")