17
07 FAN SPEED CONt ROL BU tt ONS
Press the left button to decrease the fan speed or press the right
button to increase
the fan speed.
08 DEFROS t ING/DEFOGGING FRON t AND SIDE WINDOWS
Press the defroster button
to turn the system on. The A/C automatically turns
on when the defroster mode is selected. This feature removes humidity fr\
om the air.
To defrost the front and side windows, set the temperature controls
03 and fan speed
controls 07 to their maximum settings.
09 DEFROS t ING REAR WINDOW AND OU t SIDE MIRRORS
Push the rear window defroster switch
to turn the system on or off.
This function automatically turns off after approximately 15 minutes.
10 FORESt BU tt ON (if so equipped)
Press the forest button
to activate the Forest Air® system.
This system’s settings will activate the breeze mode, the outside odo\
r and exhaust gas
detection sensor, the inside air quality sensor and the auto humidity co\
ntrol. The fan
speed and air flow is automatically set to the auto position.
11 IN t A k E AIR CON t ROL BU tt ON
Press the intake air control button to recirculate interior air inside the vehicle.
The
indicator light on the button will illuminate. This system is used to a\
void certain
outside odors and to help adjust the inside vehicle temperature more eff\
ectively.
The air recirculation mode cannot be activated when the climate control \
system is in the
front defroster
mode or front defroster and foot vent mode .
Press the intake air control button again to change the air circulation from the intake
air to from the outside air. The
indicator light on the button will extinguish.
12 OFF BU tt ON
Press the
OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1276459_14_M_Hybrid_QRG_112213.indd 1711/22/13 9:39 AM
22
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing H
v AC vents away from
the ceiling.
w ait until after the tone sounds and the face icon on
the display changes before speaking a command.
Speak naturally without long pauses and without
raising your voice.
w hen speaking Phonebook names, please be aware
some phones require the last name to be spoken before the first name. For example, “Michael
Smith” may be spoken as “Smith Michael”.
To cancel a v oice Recognition session, say “Cancel” or “Quit” or press an\
d hold the
or
button for 5 seconds.
If the v oice Recognition system does not recognize your voice commands, train th\
e system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation*
(if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when
connecting the phone.
1.
Press the
SE tt INGS button, then select the PHONE
key on the instrument panel or the
button on the
steering wheel and select the “Connect Phone” key.
2.
Initiate connecting from the phone.
•
The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit
www.InfinitiUSA.com/bluetooth.
•
w
hen prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
3.
w
hen connecting is complete, the screen will return
to the Phone menu display.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Microphone
1276459_14_M_Hybrid_QRG_112213.indd 2211/22/13 9:39 AM
