2014 INFINITI Q60 CONVERTIBLE automatic transmission

6
first drive features
Seat Belt Guide (Convertible models)
Unsnap the seat belt guide 01 to allow rear seat passengers easier access.
Before fastening the seat belt, ensure the seat belt is




inserted into the seat belt guide and the snaps are




securely fastened.
When using the seat belt guide, do not allow the seat



belt to twist so that it will retract correctly.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)”\
of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:



•

Confirm the shift lever is in the
P (PA rk ) position
(automatic transmissions) or the parking brake is applied (manual tra\
nsmissions).



•

Push the ignition switch to the
ON position.



•

Adjust the driver’s seat, steering column and outside mirrors to the \
desired positions using
the adjusting switches for each feature.



•
Push the SE
t switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.



•

The indicator light on the memory switch you select will illuminate for \
approximately 5 seconds.




•

The driver’s seat, steering column and outside mirror positions are n\
ow set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Passenger Rear Seat Entry/Exit
For ease in entering and exiting the rear passenger
areas of the vehicle, perform the following steps:



1.

Release the front seatbelt guide and seat belt.

(Convertible models)



2.

Pull the seatback lever 01 upward to fold the
front seatback forward. Make sure that the front
seatback is completely folded.



3.


To slide the front seat forward, firmly push

the seatback button
02. The front seat will
move forward.
To stop the front seat from sliding, press the seatback button 02 again. To return the front seat to its original position:



1.

Push or pull the seatback backward until it locks in place.



2.

Press the seatback button 02 to slide the front seat backward.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (se\
ction 1)” of your

Owner’s Manual.
Coupe
Convertible
01
01
02
02
01
1276473_14a_Q60_Convertible_QRG_062113.indd 66/21/13 3:31 PM

7
Outside Mirror Control Switch
To select the right or left side mirror, turn the control
switch
01 right or left.
To adjust the mirror angle,
move the control switch
01 up, down, right or left.
To prevent accidentally moving the mirror, turn and




set the switch to the middle (neutral) position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
AUTOMATIC TRANSMISSION (if so equipped)
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.



•

If the brake pedal is not depressed, pushing the

ignition switch once enters the ACC mode.



•

If the ignition switch is pushed a second time, the

vehicle will enter the ON mode.
Press the ignition switch
S t A rt /S t OP button to start
the engine.
MANUAL TRANSMISSION (if so equipped)
Depress the brake pedal.



•

If the brake pedal is not depressed, pushing the ignition switch once en\
ters the
ACC mode.



•

If the ignition switch is pushed a second time, the vehicle will enter t\
he
ON mode.
Move the shift lever to N (NEU tr AL).
Depress the clutch pedal to the floor.
Press the ignition switch S t A rt /S t OP button.
TURNING THE ENGINE OFF
For an automatic transmission, move the shift lever to the P (PA rk ) position, apply the
parking brake and push the ignition switch.
For a manual transmission, apply the foot brake, place the vehicle in 1s\
t gear, apply the
parking brake and push the ignition switch.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
1276473_14a_Q60_Convertible_QRG_062113.indd 76/21/13 3:31 PM

14
first drive features
Opening/Closing the Hard Top (Convertible models)
Before opening or closing the retractable hard top, refer to
your Owner’s Manual for detailed warnings and cautions
regarding hard top operation.
t
he trunk area must be absolutely empty or it may result
in damage to the hard top.
Preparing to Lower the
h ard t op
1.


The vehicle must be on a level surface when operating

the hard top.
2.


Make sure that the trunk area is absolutely empty.
3.


Pull up on the strap to open the trunk room partition.
4

.


Secure the partition hooks into holders until they latch.

If the trunk room partition hooks are not latched in the
holders, the hard top cannot be operated and
the C
h EC k SEPA r A t O r indicator will illuminate
on the vehicle information display located
between the tachometer and speedometer.
5.


Securely close the trunk before operating the hard top.
h

ard t op Operation
1.


Move the shift lever to the
P (P A rk) position
(automatic transmission) or move the shift lever to
the N (N
EU tr AL ) position (manual transmission) and
apply the parking brake.
2.


Start the engine.
3.


Press the hard top operating switch, located on the

center console, to OPEN or CLOSE and hold until the
top is fully positioned.
4.

The
r
OOF OPEN or r OOF CLOSED indicator will display when the hard top is fully positioned.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

1276473_14a_Q60_Convertible_QRG_062113.indd 146/21/13 3:31 PM