2014 HONDA INSIGHT navigation system

Thechartontherightexplainsthe
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
Theaudiosystemwilltrytoplaythe
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc. For the additional information on
damaged discs, seepage.
Insert a dif f erent disc. If the new
disc plays, there is a problem with
the f irst disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer. Cause
Error Message Solution
215
Track/File format not
supported
Mechanical Error
FOCUS Error
TOC Error Current track will be skipped. The next
supported track or file plays automatically.
Press the EJECT button and pull out the disc.
Check the disc for serious damage, signs of
deformation, excessive scratches, and/or dirt
(seepage 215). Insert the disc again. If the code
does not disappear, or the disc cannot be
removed, consult your dealer. Do not try to
force the disc out of the player.
Press the EJECT button and pull out the disc.
Make sure it is inserted correctly in the disc
player.
Make sure the disc is not scratched or damaged.
For more information, seepage 215.
Disc Player Error Messages (L X model and EX model without navigation system)
194
UNSUPPORTED
BAD DISC
PLEASE CHECK OWNERS
MANUAL
PUSH EJECT
CHECK DISC
12/07/13 17:01:26 31TM8630_199
FeaturesTOC
2014 Insight

´
µ
Playing an iPod(U.S. L X model and EX model without navigation system)
195
BUTTON
BUTTON
TITLE BUTTON
BUTTON AUX BUTTON
iPod INDICATOR
USB INDICATOR
RDM BUTTON
RPT BUTTON
SEEK (SKIP ) BUTTON
SEEK (SKIP ) BUTTON
12/07/13 17:01:32 31TM8630_200
FeaturesTOC
2014 Insight

Do not connect your iPod using a
hub.
DonotkeeptheiPodinthe
vehicle. Direct sunlight and high
heat will damage it.
Do not use an extension cable
between the USB adapter cable
equipped with your vehicle and
your dock connector.
We recommend backing up your
data bef ore playing it.
Some devices cannot be powered
or charged via the USB adapter. If
this is the case, use the accessory
adapter to supply power to your
device.
iPod models conf irmed to be
compatible with your audio system
using the USB adapter cable are:
This audio system can play the audio
f iles on the iPodwith the same
controls used f or the in-dash disc
player. To play an iPod, connect it to
the USB adapter cable in the console
compartment by using your dock
connector, then press the AUX
button. The ignition switch must be
in the ACCESSORY (I) or ON (II)
position. The iPod will also be
recharged with the ignition switch in
these positions.
The system will only play songs
stored on the iPod with iTunes.
iPod and iTunes are registered
trademarks owned by Apple Inc. This system may not work with all
sof tware versions of these devices.
Model
iPod classic 80/160 G
iPod classic 120 G
iPod classic 160 G (launch in 2009)
iPod (5th generation)
iPod nano
iPod touch
Playing an iPod(U.S. L X model and EX model without navigation system)
To Play an iPod
196
NOTE:
12/07/13 17:01:41 31TM8630_201
FeaturesTOC
2014 Insight

Unclip the USB connector by
pivoting it, and pull out the USB
adapter cable in the console
compartment.Connect your dock connector to
the iPod correctly and securely.
Install the dock connector to the
USB adapter cable securely.If the iPod indicator does not appear
in the audio display, check the
connections, and try to reconnect the
iPod a f ew times.
If the audio system still does not
recognize the iPod, the iPod may
need to be reset. Follow the
instructions that came with your
iPod, or you can f ind reset
instructions online at
1. 2.
3.
www.apple.com/
CONT INUED
Connect ing an iPod
Playing an iPod(U.S. L X model and EX model without navigation system)
197
DOCK CONNECTOR
USB ADAPTER
CABLE
USB CONNECTOR
USB ADAPTER CABLE
12/07/13 17:01:49 31TM8630_202
FeaturesTOC
2014 Insight

µ´
µ
¼ Use the SKIP button while an iPod is
playing to change f iles.
Each time you press the
(SKIP ) button, the system
skips forward to the beginning of the
next f ile. Press the (SKIP )
button, to skip backward to the
beginning of the current f ile. Press it
again to skip to the beginning of the
previous f ile.
To move rapidly within a f ile, press
andholdeitherside( or )
of the SKIP button.
Each time you press the TITLE
button the display mode switches
between the album name, the song
name, the artist name, or name of f
(which turns off the text display).
The display shows up to 16
characters of the selected data. If the
text data has more than 16
characters, you will see the first 15
characters and the indicator in
the display. Press and hold the
TITLE button until the next 16
characters are shown.
T o Change or Select Files
T ext Data Display Function
SK IP
Playing an iPod(U.S. L X model and EX model without navigation system)
198
12/07/13 17:01:57 31TM8630_203
FeaturesTOC
2014 Insight

µµ
You can also select a file from any
list on the iPod menu: playlists,
artists, albums and songs, by using
the VOL/SELECT knob. Push the
VOL/SELECT knob to switch the
display to an iPod menu, then turn
the VOL/SELECT knob to select a
desired list. Press the VOL/SELECT
knob to set your selection. The display shows items on the
selected list. Turn the VOL/
SELECT knob to select an item, then
press the VOL/SELECT knob to set
your selection.
If you select ‘‘ALL,’’ all available f iles
on the selected list are played.
Pressing the button goes back
to the previous display and pressing
the TITLE button cancels this
setting mode.
You can select any type of repeat and
shufflemodebyusingtheRPT
button or the RDM button.
This feature
continuously plays a f ile. To activate
the repeat f eature, press the RPT
button. You will see ‘‘RPT’’ in the
display. To turn it of f , press the RPT
button again.
This feature
plays all available f iles in a selected
list (playlists, artists, albums or
songs) in random order. To activate
the shuffle all feature, press the
RDM button. You will see ‘‘RDM’’ in
the display. To turn it of f , press and
hold the RDM button.
CONT INUED
T o Select Repeat or Shuf f le Mode:
REPEAT
SHUFFLE ALL
Playing an iPod(U.S. L X model and EX model without navigation system)
199
Press the
VOL/SELECT knob.
12/07/13 17:02:06 31TM8630_204
FeaturesTOC
2014 Insight

µ
Î
Î
This feature
plays all available albums in a
selected list (playlists, artists, albums
or songs) in random order. The f iles
in each album are played in the
recorded order. To activate the
shuf f le album f eature, press the
RDM button repeatedly. You will see
‘‘F-RDM’’ in the display. To turn it
of f , press and hold the RDM button.
Each time you press the RDM
button, the mode changes f rom
shuffle all play to shuffle album play,
then to normal play. To play the radio when an iPod is
playing, press the FM/AM button. If
a disc is in the audio unit, press the
CD button to play the disc.
You can disconnect the iPod at any
time when you see the ‘‘OK to
disconnect’’ message in the iPod
display. Always make sure you see
the ‘‘OK to disconnect’’ message in
the iPod display bef ore you
disconnect it. Make sure to f ollow
the iPod’s instructions on how to
disconnect the dock connector f rom
the USB adapter cable.
The displayed message may vary
on models or versions. On some
models, there is no message
to disconnect.
If you reconnect the same iPod, the
system may begin playing where it
lef t of f , depending on what mode the
iPod is in when it is reconnected.
When you disconnect the iPod while
it is playing, the display shows ‘‘USB
NO DATA.’’
:
SHUFFL E AL BUM
T o Stop Playing Your iPod
Disconnect ing an iPod
Playing an iPod(U.S. L X model and EX model without navigation system)
200
12/07/13 17:02:14 31TM8630_205
FeaturesTOC
2014 Insight

If you see an error message on the
audio display while playing
an iPod, find the solution in the
chart to the right. If you cannot
clear the error message, take your
vehicle to your dealer.Cause
Error Message Solution
USB ROM Error
Appears when an
incompatible device is
connected
No files in iPod
Use of unsupported
iPod
Recognition failure of
iPodThere is a problem with the USB adapter unit.
Disconnect the device. Then, turn the audio
systemoff,andturnitonagain.Donot
reconnect the device that caused the error.
Appears when the iPod is empty. Store some
files in the iPod.
Appears when an unsupported iPod is
connected. See
page 196for the specification
information for iPods. If it appears when a
supported iPod is connected, update the iPod
software to the newer version.
Appears when the system does not
acknowledge the iPod. Reconnect the iPod.
iPodError Messages (U.S. L X model and EX model without navigation system)
201
USB ERROR BAD USBDEVICE
PLEASE CHECK OWNERS
MANUAL
iPod NO SONG
UNSUPPORTED VER.
CONNECT RETRY
12/07/13 17:02:18 31TM8630_206
FeaturesTOC
2014 Insight