2014 HONDA CR-Z Technology Reference Guide

15
Paddle Modes
P A D D L E S H I F T I N G
While in the D position, 7Speed Manual Shift Mode allows you to manually shift your
vehicle’s speeds up or down. Useful for engine braking or when driving in hilly terrain
or cornering. Available on vehicles with automatic transmission.
Pull () to shift down. Pull (
\b) to shift up.
NORMAL or ECON Mode
• Pull (\b) or () to temporarily switch from
automatic to manual shift mode.
• The speed number is displayed on the shift indicator display.
• When the vehicle’s speed is constant, the mode returns to automatic.
SPORT Mode
• Pull (\b) or () to switch to manual shift mode.
• The M indicator and speed number aredisplayed on the shift indicator display.
• Pull (\b) or () to change transmission \0speeds.
• Pull and hold (\b) to cancel this mode.
L (Low) Mode
• Pull and hold (\b) and () at the \0same time until L is displayed on the shift indicator display.
• Use this mode to get higher torque when climbing steep hills.
• Pull and hold again to cancel this mode.
14
How It Works
T I R E P R E S S U R E M O N I T O R I N G S Y S T E M ( T P M S )
Monitors the vehicle’s tire pressures.
When the tire pressure drops
significantly below recommended
levels, the low tire pressure
indicator comes on and CHECK
TIRE PRESSURE appears on the
MID.
If there is a problem with the
system, CHECK TPMS SYSTEM
appears on the MID. See a dealer.
What to Do
1. Visually inspect the tires for damage.
2. Use a tire air pressure gauge to check which tire(s) have low
pressure.
3. Inflate the tire(s), if necessary, to the recommended pressures listed on
the label on the driver’s doorjamb.
14 CRZ TRG_ATG_NEW \ASTYLE 8/15/2013 2\A\f01 PM Page 9

R E A R V I E W C A M E R A
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up. Available on vehicles without navigation.
M U L T I V I E W R E A R C A M E R A
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up. Available on vehicles with navigation.
1716
How It Works
• When you shift into Reverse (R), a realtime image of the area behind your vehicle is shown in the rearview mirror, along with helpful parking guidelines.
• The display turns off when you shift out of Reverse.
• Press and hold the power button for 3 seconds to turn the guidelines off. Repeat to turn back on.
How It Works
• When you shift into Reverse (R), a realtime image
of the area behind your vehicle is shown in the
navigation display.
• The rearview display turns off when you shift out of Reverse.
Parking Guidelines
• Yellow parking guidelines also appear tohelp you judge distance. They can be
turned on or off.
• Press and hold CANCEL until the guidelines turn on or off. They remain
off until you turn them on again.
Switching Views
There are three rearview modes: wide,
normal, and top down.
• Select the corresponding icon tochange views.
• Press ZOOM (p\fq) to adjust the screen brightness.








P




O











They remain off until you
t














P




O






Wide (default)
Normal
Top down


They remain off until you
t





14 CRZ TRG_ATG_NEW \ASTYLE 8/15/2013 2\A\f01 PM Page 10

V O I C E R E C O G N I T I O N
Key Functions by Voice Command
B L U E T O O T \b® \b A N D S F R E E L I N K®p. 27
A U D I Op. 21
C L I \f A T Ep. 21
N A V I G A T I O Np. 22
The voice control system uses the steering wh\Heel buttons and the ceilin\Hg microphone.
\bo reduce the potential\c for driver distraction, certain manual and
touchscreen functions may \fe inopera\fle or grayed out while the v\cehicle is
moving. Voice commands are always availa\fle.
181\b
PickUp \futton: Answer an
incoming call, or go directly to
the Phone screen.
\balk \futton: Say navigation, H\fL,
audio, and climate control
commands.
HangUp \futton: End a call or
decline a call.
Back \futton: Cancel a command
or return to the previous screen.
To keep your eyes on the road and hands on the whe\Hel, use the Talk button to say
voice commands to operate ce\Hrtain vehicle features.
Voice Command Tips
• Press and release the Talk button, wait for a beep, then say a command.
• All available voice commands are highlighted in blue \Hwhen you press the Talk
button.
• \for a list of available commands, press and release the Talk button and say “Help” at any time. \for a full list of commands, say “D\bsplay \bnf\frmat\b\fn” and “V\f\bce
\bnf\f,” or see your Navigation Manual.
• Speak in a clear, natural voice, and reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
• The system also uses a touch\Hscreen display. You can select options or icons \Hby touching them on the screen. This is limited while th\He vehicle is moving.
14 CRZ TRG_ATG_NEW \ASTYLE 8/15/2013 2\A\f13 PM Page 11

2021
Commonly Used Voice Commands
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
G e n e r a l C o m m a n d s(Accepted on most screens to change displays)
• Display map
• Display menu
• Display information
• Display audio
• What time is it?
• Next\fprevious
(to change pages)• Left\fright(to change tabs)• Up\fdown(to scroll lists up to three pages)
F i n d P l a c e C o m m a n d s(Accepted on Map screen)
• Find nearest: ATM Honda dealer
gas station airport
Mexican hospital restaurant bank
post office
N a v i g a t i o n C o m m a n d s(Accepted on Map screen)
• How long\ffar to the destination?
• Display destination map
• Display entire route
D i s p l a y C o m m a n d s(Accepted on Map screen)
• Display\fHide: ATM
gas station
restaurant
post office
• Display north up\fheading up
• Zoom in\fout
• Go home
• Display current location
A u d i o C o m m a n d s(Accepted on most screens)
• Radio on
• Radio # FM\fAM
• Radio preset 1\f2\f3\f4\f5\f6
• DISC\fUSB\fiPod play
• DISC\fUSB\fiPod skip forward\fback
• Auxiliary (AUX) play
H e l p C o m m a n d s(Accepted on most screens)
• Help (list of available commands for current screen)
• Voice info from INFO screen (list of all
available commands by category)
P h o n e C o m m a n d s(Accepted on Phone screen)
• Dial
• Speed Dial 1 (or 2)
• Redial
• Phonebook
• Phone setup
(Accepted on any screen)
• Dial by number
• Dial by voice tag
C l i m a t e C o n t r o l C o m m a n d s(Accepted on most screens)
• Air conditioner on\foff
• Rear defrost on\foff
• Climate control recirculate\f fresh air
• Fan speed up\fdown
• Temperature # degrees (# = 57–87)
• Temperature max hot\fcold
Press and release the Talk button before you say a command.Press and release the Talk button before you say a command.
14 CRZ TRG_ATG_NEW \ASTYLE 8/15/2013 2\A\f01 PM Page 12

Map Screen Legend
N A V I G A T I O NRealtime navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination. Available on vehicles with navigation.
2223
Entering a Destination Using Voice Commands
Set a destination using a street address. For other destination options, see your
Navigation Manual.
1. Say “Display menu.” Say “Address.”
2. Say “Street,” then say the street
name on the next screen. Do not
include the direction (N, S, E, W)
or type (St, Ave, Blvd, etc.).
3. A list of street names appears. Say the number next to the
street you want to select.
Note\f It is recommended that you enter your destination before driving or
when the vehicle is stopped.
5. If the street address is in more than one city, a list of city names
appears. Say the number next to
the city you want to select.
6. The system displays the “Calculate route to” screen.
Say “Set as destination” to set
the route.
4. Say the entire street address number. For example, “123\f.”
If necessary, say “OK” to
proceed.
Direction of destination
Calculated route
Distance to go
Time to go
Current vehicle
location
Find a nearby point of interest, such as a gas station, movie theater, restaurant, etc.
Using the “Find Nearest” Command
1. From the map screen, say “Find nearest ATM.”
2. A list of the nearest ATMs in your area is displayed by
shortest distance to destination. 3. Say the number next to the
destination you want to select.
4. The system displays the “Calculate route to” screen.
Say “Set as destination” to set
the route.
Press and release the Talk button before you say a command.Press and release the Talk button before you say a command.
14 CRZ TRG_ATG_NEW \ASTYLE 8/15/2013 2\A\f01 PM Page 13

FM Traffic
25
Displaying Traffic Information
Say “Display traffic”to view highway flow data.
Note\fTraffic flow and incident icons
are only displayed on map scales of 5
miles or less.
Heavy traffic
Moderate traffic
Traffic
Flow
data
Traffic
Flow
data Incident
icon
Incident
icon
Incident
Traffic Icons\f
Construction
Road closed
Weather
Provides continuously updated information, including traffic speed, incidents, and
construction in major metro areas. Works in cities where a clear FM traffic signal
is available.
1. Say “Display traffic list” to view a
list of incidents on your route.
2. Say the number of the incident you want to avoid. When the
incident appears, say “Traffic
detail.”
3. Say “Avoid,” and the incident
list returns.
4. Say “Reroute” to set the new
route.
Traffic Rerouting
When a destination is already set, you can create a detour to avoid traffic
incidents or congestion.
24
How to Use HFL
HFL Talk button\f Give HFL commands
or answer incoming calls.
HFL Back button\f End a call, go back
to the previous command, or cancel an
operation.
BLUETOOTH® HANDSFREELINK®(HFL) (without navigation)
Make and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if this feature is compatible with your phone.
Pairing Your Phone
You can pair your phone only when your vehicle is stopped.
Press and release the Talk button before you say a command.
Press and release the HFL Talk button before you say a command.
1. Enable discovery mode on your
phone.
2. If no phone has been paired before, the system gives you instructions.
If you are pairing an additional phone,
say “Phone setup,” then say “Pair.”
3. HFL gives you a fourdigit code that also appears on the MID.
4. Search for HandsFreeLink from your phone, and enter the code when
prompted. Connect to HFL.
5. HFL asks you to name the phone. For example, say “Mary’s phone.” The
phone is now added.
14 CRZ TRG_ATG_NEW \ASTYLE 8/15/2013 2\A\f01 PM Page 14

Receiving a Call
Press the HFL Talk button to
accept the call.
Press the HFL Back button to
end or decline the call.
A notification is heard and the
incoming phone number appears
on the MID.
2627
Press and release the HFL Talk button before you say a command.
Making a Call
1. Say “Call” or “Dial” and the phone number.
2. Say “Call” or “Dial”to continue.
3. The call is connected and heard through the vehicle’s speakers.
Press and release the HFL Talk button before you say a command.
HFL Phonebook
1. Say “Phonebook.”
2. Say “Store.”
3. Say the name of the contact, and then the phone number.
4. To call a contact once an entry is stored, say “Call Mike.”
Store up to 50 names and their phone numbers, which can be used as speed dials.
BLUETOOTH® HANDSFREELINK®(HFL) (with navigation)
Make and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if this feature is compatible with your phone.
To reduce the potential for driver distraction, certain manual and touch
screen functions may be inoperable or grayed out while the vehicle is
moving. Voice commands are always available.
How to Use HFL
PickUp button\f Answer an
incoming call, or go directly to the
Phone screen.
Talk button\f Give navigation, HFL,
audio, or climate control commands.
HangUp button\f End a call or
decline a call.
Back button\f Cancel a command
and return to the previous screen.
Use these buttons to navigate through the HFL menus.
Joystick\bENTER button\f
Move up, down, left, or
right to scroll options, and
press to make a selection. PHONE button\f
Go directly to the
Phone screen.
CANCEL button\f
Press to cancel an
operation or return to
the previous screen.
14 CRZ TRG_ATG_NEW \ASTYLE 8/15/2013 2\A\f01 PM Page 15

2829
Pairing Your Phone
1. Press PHONE to go to the Phonescreen. A prompt appears. Say “Yes.”
2. Make sure your phone is in discovery mode. Say “OK.”
3. HFL searches for your phone. Say the number next to the phone when it
appears on the list.
If your phone does not appear:
Say “Find another phone,” and search for
HandsFreeLink from your phone.
Connect to HFL.
4. HFL gives you a fourdigit code. Enter it on your phone when prompted. The
phone is now paired.
Use this pairing method when no phone has ever been paired to the system. You
can pair your compatible phone only when the vehicle is stopped.
1. Press PHONE to go to the Phone screen. If a prompt appears asking to
connect to a phone, say “No.”
2. Say “Phone setup.”
3. Say “Bluetooth setup add select a phone.”
4. Say “Search.”
5. Make sure your phone is in discovery mode. Say “OK.”
6. HFL searches for your phone. Say the number next to the phone when it
appears on the list.
If your phone does not appear:
Say “Find Another Phone,” and search for
HandsFreeLink from your phone.
Connect to HFL.
7. HFL gives you a fourdigit code. Enter it on your phone when prompted. The
phone is now paired.
Use this pairing method when a phone has already been paired to the system, or
when you want to pair an additional phone.
Press and release the Talk button before you say a command.
Press and release the Talk button before you say a command.
Dialing a Number
Enter a 10digit phone number to call.
1. Press PHONE to go to the Phonescreen.
2. Say “Dial.”
3. Say the entire phone number. For example, “31\b555123\f.”
4. Say “Dial” to begin the call.
Using the Phonebook
1. Press PHONE to go to the Phone screen.
2. Say “Phonebook.”
3. Scroll through the list to find the name and number you want.
4. Say “Call” to begin the call.
When your phone is paired, its entire phonebook is automatically imported to
the system. This feature is inoperable when the vehicle is moving.
Press and release the Talk button before you say a command.
Note\f You can also say “Dial by number,” followed by the phone number and “Dial”
from any screen.
Press and release the Talk button before you say a command.
14 CRZ TRG_ATG_NEW \ASTYLE 8/15/2013 2\A\f01 PM Page 1\b