
249
uuWhen Driving uVehicle Stability Assist (VSA ®), aka Electronic Stability Control (ESC), System
Continued
Driving
Vehicle Stability Assist (VSA ®), aka Electronic 
Stability Control (ESC), System
Helps to stabilize the vehicl e during cornering if the vehicle turns more or less than 
what was intended. It also assists in main taining traction on slippery surfaces. It does 
so by regulating engine output and selectively applying the brakes.
When VSA® activates, you may notice that the 
engine does not respond to the accelerator. 
You may also notice some noise from the 
hydraulic system. You will also see the 
indicator blink.
■VSA ® Operation
1 Vehicle Stability Assist (VSA ®), aka Electronic Stability Control 
(ESC), System
The VSA ® may not function properl y if tire types and 
size are mixed. Make sure to use the same size and 
types of tire, and the ai r pressures as specified.
When the VSA ® indicator comes on and stays on 
while driving, there may  be a problem with the 
system. While this may not interfere with normal 
driving, have your vehi cle checked by a dealer 
immediately.
VSA ® cannot enhance stability in  all driving situations 
and does not control the entire braking system. You 
still need to drive and corner at speeds appropriate 
for the conditions and always leave a sufficient 
margin of safety.
The main function of the VSA ® system is generally 
known as Electronic Stability Control (ESC). The 
system also includes a  traction control function.
VSA® System 
Indicator
14 CR-V-31T0A6200.book  249 ページ  2014年2月10日 月曜日 午後7時1分 

uuWhen Driving uVehicle Stability Assist (VSA® ), aka Electronic Stability Control (ESC), System
250
Driving
This button is on the driver side control panel. 
To turn the VSA® system on and off, press and 
hold it until you hear a beep.
VSA® stops and the indicator comes on.
To turn it on again, press the   (VSA ® OFF) 
button until you hear a beep.
VSA ® is turned on every time you start the 
engine, even if you turned it off the last time 
you drove the vehicle.
■VSA ® On and Off1 Vehicle Stability Assist (VSA ®), aka Electronic Stability Control 
(ESC), System
Without VSA ®, your vehicle will  have normal braking 
and cornering ability, bu t it will not have VSA® 
traction and stability enhancement.
In certain unusual  conditions when your vehicle gets 
stuck in shallow mud or fr esh snow, it may be easier 
to free it with VSA ® temporarily switched off.
When the VSA ® system is off, the traction control 
system is also off. You should only atte mpt to free 
your vehicle with VSA ® off if you are not able to free 
it when the system is on.
Immediately after  freeing your vehicle, be sure to 
switch VSA ® on again. We do not recommend driving 
your vehicle with the VSA ® and traction control 
systems switched off.
If the low tire pressure/TPMS indicator comes on or 
blinks, the VSA®  system comes on automatically. In 
this case, you cannot turn the system off by pressing 
the  button.
You may hear a motor sound coming from the 
engine compartment while system checks are being 
performed immediately after starting the engine or 
while driving. This is normal.
VSA ® OFF 
Indicator
14 CR-V-31T0A6200.book  250 ページ  2014年2月10日 月曜日 午後7時1分 

257
uuBraking uBrake System
Driving
Your vehicle is equipped with disc brakes at all four wheels. A vacuum power assist 
helps reduce the effort needed on the brake  pedal. The brake assist system increases 
the stopping force when you depress the brake pedal hard in an emergency 
situation. The anti-lock brake system (ABS) helps you retain steering control when 
braking very hard.
2 Brake Assist System  P. 259
2 Anti-lock Brake System (ABS)  P. 258
■Foot Brake1Foot Brake
Check the brakes after driving through deep water, 
or if there is a buildup of road surface water. If 
necessary, dry the brakes by  lightly depressing the 
pedal several times.
If you hear a continuous me tallic friction sound when 
applying the brakes, the brake pads need to be 
replaced. Have the vehicle checked by a dealer.
Constantly using the brak e pedal while going down a 
long hill builds up heat, which reduces the brake 
effectiveness. Apply engine  braking by taking your 
foot off the accelerator pe dal and downshifting to a 
lower gear.
Do not rest your foot  on the brake pedal while 
driving, as it will lightly  apply the brakes and cause 
them to lose effectiveness  over time and reduce pad 
life. It will also conf use drivers behind you.
14 CR-V-31T0A6200.book  257 ページ  2014年2月10日 月曜日 午後7時1分 

258
uuBraking uAnti-lock Brake System (ABS)
Driving
Anti-lock Brake System (ABS)
Helps prevent the wheels from locking up, a nd helps you retain steering control by 
pumping the brakes rapidly, much faster than you.
The electronic brake distribution (EBD) system, which is part of the ABS, also 
balances the front-to-rear braking distri bution according to vehicle loading.
You should never pump the brake pedal.  Let the ABS work for you by always 
keeping firm, steady pressure on the brake pe dal. This is sometimes referred to as 
“stomp and steer.“
■ABS operation
The brake pedal may pulsate slightly when  the ABS is working. Keep holding the 
pedal firmly down. On dry pavement, you  need to press on the brake pedal very 
hard before the ABS activates. However,  you may feel the ABS activate immediately 
if you are trying to stop on snow or ice.
When the vehicle speed goes unde r 6 mph (10 km/h), the ABS stops.
1Anti-lock Brake System (ABS)
NOTICE
The ABS may not function correctly if you use an 
incorrect tire type and size.
When the  ABS indicator comes on while driving, 
there may be a problem with the system.
While normal braking is not affected, there is a 
possibility of the ABS not  operating. Have the vehicle 
checked by a dealer immediately.
The ABS does not reduce the ti me or distance it takes 
to stop the vehicle. It only  helps with steering control 
during hard braking.
In the following cases, yo ur vehicle may need more 
stopping distance than a vehicle without the ABS:
•When driving on rough road surfaces, including 
when driving on uneven surf aces, such as gravel or 
snow.
•When tire chains are installed.
You may hear a motor sound coming from the 
engine compartment while system checks are being 
performed immediately after starting the engine or 
while driving. This is normal.
14 CR-V-31T0A6200.book  258 ページ  2014年2月10日 月曜日 午後7時1分 

260
Driving
Parking Your Vehicle
When Stopped
1.Depress the brake pedal firmly with the shift lever in (D.
2. Firmly apply the parking brake.
3. Move the shift lever from 
(D to (P.
4. Turn off the engine.
Always set the parking brake firmly, in part icular if you are parked on an incline.
1Parking Your Vehicle
Do not park your vehicle  near flammable objects, 
such as dry grass, oil, or timber.
Heat from the exhaust can cause a fire.
1 When Stopped
NOTICE
The following can dama ge the transmission:
•Depressing the accelerator and brake pedals 
simultaneously.
•Holding the vehicle in place when facing uphill by 
depressing the accelerator pedal.
•Moving the shift lever into ( P before the vehicle 
stops completely.
Raise the wiper arms when snow is expected.
14 CR-V-31T0A6200.book  260 ページ  2014年2月10日 月曜日 午後7時1分 

262
Driving
Refueling
Fuel Information
■Fuel recommendation
Use of lower octane gasoline can cause a persistent, heavy metallic knocking noise 
that can lead to engine damage.
■Top tier detergent gasoline
Because the level of detergency and additive s in gasoline vary in the market, Honda 
endorses the use of “TOP TIER Deterg ent Gasoline” where available to help 
maintain the performance and reliability of your vehicle. TOP TIER Detergent 
Gasoline meets a new gasoline standard join tly established by leading automotive 
manufacturers to meet the need s of today’s advanced engines.
Qualifying gasoline retailers will, in most cases, identify their gasoline as having met 
“TOP TIER Detergent Gasoline” standards  at the retail location. This fuel is 
guaranteed to contain the proper level of  detergent additives and be free of metallic 
additives. The proper level of detergent  additives, and absence of harmful metallic 
additives in gasoline, help avoid build-up  of deposits in your engine and emission 
control system.
For further important fuel-related information for your vehicle, or on information on 
gasoline that does not contain MMT, visit  www.hondacars.com. In Canada, visit 
www.honda.ca  for additional information on gasolin e. For more information on top 
tier gasoline, visit www.toptiergas.com .
Unleaded gasoline, pump octane number 87 or higher
1Fuel Information
NOTICE
We recommend quality ga soline containing 
detergent additives that help prevent fuel system and 
engine deposits. In  addition, in order to maintain 
good performance, fuel economy, and emissions 
control, we strongly reco mmend the use of gasoline 
that does NOT contain  harmful manganese-based 
fuel additives such as MMT, if such gasoline is 
available.
Use of gasoline with these additives may adversely 
affect performance, a nd cause the malfunction 
indicator lamp on your inst rument panel to come on. 
If this happens, contact a dealer for service.
Some gasoline today is ble nded with oxygenates such 
as ethanol. Your vehicle is designed to operate on 
oxygenated gasoline containing up to 15% ethanol 
by volume. Do not use gaso line containing methanol. 
If you notice any undesira ble operating symptoms, try 
another service station or sw itch to another brand of 
gasoline.
14 CR-V-31T0A6200.book  262 ページ  2014年2月10日 月曜日 午後7時1分 

Continued263
uuRefueling uHow to Refuel
Driving
■Fuel tank capacity: 15.3 US gal (58 liters)
How to Refuel
1. Stop your vehicle with  the service station 
pump on the left side of the vehicle in the 
rear.
2. Turn off the engine.
3. Pull on the fuel fill door release handle 
under the lower left corner of the 
dashboard.
u The fuel fill door opens.
1How to Refuel
3WARNING
Gasoline is highly flammable and explosive. 
You can be burned or seriously injured 
when handling fuel.
• Stop the engine, and  keep heat, sparks, 
and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Pull
14 CR-V-31T0A6200.book  263 ページ  2014年2月10日 月曜日 午後7時1分 

265
Driving
Fuel Economy
Improving Fuel Economy
Fuel economy depends on several conditions, including driving conditions, your 
driving habits, the condition of your vehicle, and loading. Depending on these and 
other conditions, you may or may not achieve the rated fuel economy of this vehicle.
You can optimize your fuel economy with proper maintenance of your vehicle. 
Always maintain your vehicle in accordance with the messages displayed on the 
information display/intelligent  multi-information display (i-MID).
• Use the recommended viscosity engine oil,  displaying the API Certification Seal.
• Maintain the specified tire pressure.
• Do not load the vehicle with excess cargo.
• Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside 
adds weight and increases wind resistance.
■Maintenance and Fuel Economy
1Improving Fuel Economy
Direct calculation is  the recommended method to 
determine actual fuel consumed while driving.
In Canada, posted fuel  economy numbers are 
established following a simulated test. For more 
information on how this test  is performed, please visit 
http://oee.nrcan.gc.ca/
Miles driven Gallons of 
fuel Miles per 
Gallon
100 LiterKilometers L per 100 km
14 CR-V-31T0A6200.book  265 ページ  2014年2月10日 月曜日 午後7時1分