2014 FORD FOCUS service

WELCOME
Congratulations on your decision to purchase or lease the latest from the
Ford Global Performance Vehicle team – the Focus ST. If you’ve owned
or leased an SVT product in the past, we’re glad you’re back. If this is
your first Ford performance vehicle, welcome to the family! We are
confident that our dedication to performance, quality, craftsmanship and
customer service will provide many miles of exhilarating, safe and
comfortable driving in your new Focus ST.
Your choice of an ST product is an intelligent and informed one. We
strive to build engaging vehicles that involve the driver in every aspect of
the driving experience. Although performance is at the heart of every ST
vehicle, we go much further. Our goal is to deliver a comprehensive,
complete vehicle, sweating the details such as the sound of the exhaust,
the quality of the interior materials, and the functionality and the
comfort of the seats, to make sure that the driver enjoys not only
exceptional performance but an outstanding driving environment as well.
In the Focus ST, that philosophy is expressed by a sophisticated
powertrain, outstanding chassis dynamics and significant interior and
exterior enhancements.
Introduction
2
2014 Focus ST(stf)
Supplement, 1st Printing, June 2013
USA(fus)

WRECKER TOWING
If you need to have your vehicle towed, contact your roadside assistance
center or a professional towing service.
It is recommended that your vehicle be towed with a wheel lift and
dollies or with flatbed equipment. When towing with a flatbed,4x4
blocks may help prevent damage when loading or unloading your vehicle.
Do not tow with a slingbelt. Ford Motor Company has not approved a
slingbelt towing procedure.
Note:If the vehicle is towed by other means or incorrectly, vehicle
damage may occur.
Roadside Emergencies
18
2014 Focus ST(stf)
Supplement, 1st Printing, June 2013
USA(fus)

A large amount of water without engine coolant may be added, in case of
emergency, to reach a vehicle service location. In this instance, the
cooling system must be drained, chemically cleaned with Motorcraft®
Premium Cooling System Flush, and refilled with prediluted coolant as
soon as possible. Water alone (without engine coolant) can cause engine
damage from corrosion, overheating or freezing.
•Note:Do not use alcohol, methanol or brine or any engine coolants
mixed with alcohol or methanol antifreeze (coolant). Alcohol and
other liquids can cause engine damage from overheating or freezing.
•Note:Do not add extra inhibitors or additives to the coolant. These
can be harmful and compromise the corrosion protection of the engine
coolant.
Unscrew the cap slowly. Any pressure will escape as you unscrew the
cap.
Add prediluted engine coolant meeting the Ford specification. See
Capacities and Specificationsfor more information. Whenever coolant
has been added, the coolant level in the coolant reservoir should be
checked the next few times you drive the vehicle. If necessary, add
enough prediluted coolant to bring the coolant level to the proper level
and concentration.
Coolant Refill Procedure
The following procedure should be used when refilling the cooling
system after it has been drained or become extremely low.
1. Remove the pressure relief cap from the coolant reservoir as
previously outlined.
2. Slowly add prediluted coolant to the coolant reservoir until the coolant
level is between the MIN and MAX marks on the reservoir.
3. Reinstall the pressure relief cap.
4. Start and idle the engine until the upper radiator hose is warm (this
indicates that the thermostat is open and coolant is flowing through the
entire system).
5. Shut the engine off and let it cool.
6. Remove the pressure relief cap from the coolant reservoir as
previously outlined.
Capacities and Specifications
24
2014 Focus ST(stf)
Supplement, 1st Printing, June 2013
USA(fus)

MOTORCRAFT PART NUMBERS
Component 2.0L GTDI EcoBoost engine
Engine oil filter* FL-910-S
Engine air filter FA-1908
Engine fuel filter Service for life
Spark plug CYFS12Y2 (100,000 mile service)
*Only use the specified replacement engine oil filter. The use of a
non-specified oil filter can result in engine damage.
TRANSMISSION CODE DESIGNATION
Description Code
Getrag-Ford Transmission (GFT)
Six-speed manual transaxle (MMT6)V
Capacities and Specifications
27
2014 Focus ST(stf)
Supplement, 1st Printing, June 2013
USA(fus)

WARRANTY COVERAGE
The Focus ST carries the same warranty as other Ford Focus models.
This information is covered in its entirety in the warranty information.
Warranty service for the Focus ST or any ST vehicle can be obtained at
any Ford dealer nationwide.
Ford Global Performance does not recommend modifying or racing ST,
SVT or RS vehicles, as they are designed and built to be driven as
delivered from the factory. The warranty information discusses vehicle
usage and the installation of aftermarket parts and their effect on
warranty coverage.
In the event the vehicle is intended for track use, and the loss of
warranty coverage is not of concern, the following vehicle durability
actions are required:
•Perform multi-point inspection and the maintenance outlined in the
150000 mile (240000 kilometer) normal maintenance schedule of the
scheduled maintenance before and after track use. See the vehicle
service manual for removal and installation procedures.
•Replace with Genuine Ford and Motorcraft® service parts as needed.
These actions may not necessarily protect your vehicle from damage in
competition conditions. Subjecting your vehicle to competition conditions
even with this recommended action may render repairs non-reimbursable
under the warranty.
Warranty Coverage
28
2014 Focus ST(stf)
Supplement, 1st Printing, June 2013
USA(fus)