2014 FORD FOCUS ELECTRIC battery

Smart Start
1. ChARGE PoR t DooR/LiGht RinGThe charge port is located on the front left fender. Press
the indentation on the charge port door to open it. To
close, press and hold the indentation until the door rotates
and closes. The light ring indicates the approximate charge
status of your high-voltage battery system while it is charging.
2. ChARGE oP tionS Focus Electric comes equipped with
a 120V charge cord. Ford recommends
upgrading to the optional 240V charging
station for faster, more efficient charging.
Use of a 240V charging station takes 3-4 hours to fully
charge an empty battery. In addition, you will be able to
charge your Focus Electric anywhere you find a 120V/240V
charge station as they all use the same connectors.
3. intELLiGEnt A CCESS PuSh-Button
SiLEnt St ARt
To start your Focus Electric, press the brake pedal and
press the Power Start/Stop button which is located on
the dashboard. The green indicator light lets you know that
your Focus Electric is ready to drive.
10 QuiCK TIPS
7. MyFoRD® MoBiLE APP F oR
youR SMAR tPhonE
View your vehicle’s charging information on a computer or
other Web-accessible mobile device, smartphone or from
your vehicle by downloading your free MyFord Mobile app
for your phone. Visit MyFordmobile.com and enhance your
charging experience with these key features and more:
• Text a lert: Receive text messages on your phone
that notify you of your vehicle’s charging status and
other functionality.
• Find a Charging Station: Locate charging stations
when you are on the go so you can recharge while you
are out.
8. CABin C onDitioninG Get the most miles out of every charge by letting the
interior of your Focus Electric warm up or cool down while
it is still plugged in and charging. Use MyFord Mobile to set
the cabin temperature and departure time before
you leave.
note: Cabin conditioning effectiveness may be reduced
by extreme outside temperatures or when using
120V charging.
4. SMARtGA uGE® with EC oGuiDEUse your 5-way controls located on your steering wheel to
interact with your smart dashboard. You can choose and
confirm settings and messages, control many of the SYNC
with MyFord Touch functions, and change how you view
your Focus Electric vehicle information.
5. R AnGE S CREEnSYou can choose several ways to view vehicle range.
Enter a destination and range view will let you know if
you have enough plug-in power to get there. The various
screens can also show miles per charge, distance until
plug-in power is depleted and an evaluation of economical
driving habits. Your Focus Electric even provides the visual
cues of butterflies in the right cluster which lets you know
your range surplus: more butterflies equals
greater surplus.
6. BRAKE Co ACh
The Brake Coach appears after
the vehicle has come to a stop.
It coaches you to brake in a
manner that maximizes the
amount of energy returned
through the regenerative
braking system. The percent
displayed indicates your
regenerative braking efficiency.
PlugintoFord.comTo make the most of your Focus Electric and the electric vehicle lifestyle, please visit
9. MAP QuESt® tRiP PLAnnERFord and MapQuest have teamed up to provide you with
the best routes to your destination based on charge levels
and available charging stations. After you input your
destinations, MyFord Mobile interfaces with the vehicle to
provide the confidence to always know how far you can go,
and the most economical way of getting there.
10. VALuE ChARGinGMyFord Mobile gives Focus Electric
drivers a unique “set it and forget it”
charging feature. The app lets
you know when the cheapest
rates are available and
allows you to set your
vehicle’s charging time
accordingly. Contact
your utility company to
learn if regular charging
during non-peak times
requires a rate
plan change.
4 5

1
2
3
4
5
6
7
8
CR
uiSE C ontRoL
To Set y our Cruise Control Speed
1.
Press and release on.
2. Accelerate to the desired speed.
3. Press and release SEt+, then take your foot off
the accelerator.
After you set your speed, you can adjust your
cruise speed by pressing and releasing SEt +/- .
To disable, press and release oFF.
LEFt VEhiCLE inF oRMAtion DiSPLA y
Provides specific information about various
systems on your vehicle including the status of your
high-voltage battery and the other unique features of
your electric vehicle.
Use the left-hand, 5-way controls located on the
steering wheel to choose and confirm settings and
messages. Refer to the Instrument Cluster chapter of
your Owner’s Manual for more information.
SERViCE VEhiCLE Soon LiGht
Illuminates when a powertrain or high-voltage
charge system fault has been detected. If the
indicator stays on or continues to come on, contact
your authorized dealer as soon as possible.
tiL t/tELESC oPE StEERinG CoL uMn
Unlock the steering wheel by pulling the lever down.
Adjust the steering wheel to the desired position.
Push the lever up to lock the steering wheel in place .
RiGht VEhiCLE inFoRMAtion DiSPLA y
Displays information about Entertainment, Phone,
Navigation* and Surplus. Use the right hand 5-way
controls located on your steering wheel to scroll
through, highlight and make minor adjustments
within a selected menu. Refer to the MyFord Touch
®
chapter in your Owner’s Manual for
more information.
MEDiA StEERinG whEEL ContR oLS
Press + to increase or – to decrease volume levels.
Pull toward you to access voice recognition.
Press to answer an incoming phone call.
Press to end a phone call and exit phone mode .
PuSh Button St ARt–READ y to DRiVE
note: Your intelligent access key must be inside the vehicle
to put the vehicle in “Ready to Drive” mode . The keyless
warning alert sounds when you open the driver’s door and
your vehicle is in RUN.
Allows you to go into “Ready to Drive” mode by
pressing the P owER StAR t/S toP button while
fully pressing down on the brake pedal. A green
“Ready to Drive” indicator light
will appear in the
instrument cluster after you start the vehicle. This
lets you know that the vehicle is turned on and ready
for driving. Press the P owER StAR t/S toP button
again to turn the vehicle off .
hAzARD ContR oL–unL oCK/LoCK
1
3
4
6
8
Instrument Panel
2
7
5
*if equipped67

SynC
®
with MyFord t ouch
®
Use the four-corner, four-color touchscreen to explore and
interact with your vehicle. The screen works the same way
as traditional controls, knobs and buttons do. Press the
various corners on your touchscreen to personalize the many
features and settings of your vehicle. The system provides easy
interaction with your cellular phone, multimedia entertainment,
climate controls and navigation system*.
before you Get Started
• Pair your phone with SYNC before using
MyFord Touch (see the To Pair Your
Phone with SYNC section in this guide for
instructions on how to do this).
• If you have the navigation SD card, make
sure that it is inserted into the SD slot in your
media hub or your navigation* will not work.
EV inF o
Your system has
special electric
vehicle screens.
To access these
screens, press
the “road and
leaf” icon.
• The Powerflow Status screen displays how
power is being used at any moment.
• The Charge Settings screen lets you
schedule charging and GO times, schedule
cabin conditioning times, view charge status
and more. There are four quadrants that are
arranged clockwise:
- My GO Times
- High-voltage Battery Charge Status
- Charge Profile
- Charge Status
CREA tE youR ACC ount
1. Set up your owner account at SyncMyRide.com (U.S.)
or SyncMyRide.ca (Canada). Register by following the
on-screen instructions. After registering, you can see
what services you are eligible for.
2. SYNC uses a wireless connection called
Bluetooth®
to communicate with your phone. Turn Bluetooth mode
on in your phone’s menu options. This lets your phone
find SYNC. If you need more details on setting up your
phone with SYNC, visit the website, or your phone
manufacturer’s website.
why Do i nEED A S ynC ownER ACCount?
A SYNC owner account is required for Vehicle Health
Report activation and the ability to view your reports
online. You’ll also be able to take advantage of all SYNC’s
Services and personalization features, such as saving your
Favorites and Points of Interest (POI). You’ll receive the
latest software updates that add new places, directions
and information; and if you have questions, you’ll get free
customer support. Some services may not be available in
your area. Create your account by visiting the website or
calling the toll-free number for more information. See page
three for details.
to P AiR youR PhonE with S ynC
In order to use many of the features of SYNC with MyFord
Touch, such as making a phone call, receiving a text or
using SYNC services, you must first connect or pair your
phone with SYNC. To Pair y
our Phone for the First Time
1. Make sure that your vehicle is in P (Park), and turn your
ignition and radio on.
2. Touch Add Phone in the upper left corner of the
touchscreen. Find SYNC appears on your screen and
instructs you to begin the pairing process from
your device.
3. Make sure that Bluetooth is set to on and that your
cellular phone is in the proper mode. See your phone’s
manual, if necessary. Select SYNC, and a six-digit
PIN appears on your device.
4. If you are prompted to enter a PIN on your device, it does
not support Secure Simple Pairing. To pair, enter the PIN
displayed on the touchscreen. Skip to the next step.
5 When prompted on your phone’s display, confirm that
the PIN provided by SYNC matches the PIN displayed on
your cellular phone.
6. The display indicates when the pairing is successful.
The System May Prompt y ou to
• Set your phone as the primary/favorite (the primary
phone will receive messages and voicemail).
• Download your phone book (this is required to use the
full set of voice commands).
• Turn on 911 Assist®.
*if equipped
SYnC. Say the Word .
89