2014 FIAT 500L LIVING seats

CHILD RESTRAINT SYSTEMS FOR YOUR 500L
Lineaccessori Fiat includes and Fiat reccomendes a complete range of child restraint systems to be fixed to
the vehicle through the three point adult seat belt or the Isofix anchorages.Weight groupChild restraint
systemType of child restraint
systemChild restraint system installation
Group 0+ – from 0
to 13 kg
Britax Baby Safe plus
Approval number:
E1 04301146
Fiat order code: 71806415It must be fitted rearward facing with the
three-point seat belt only. If it is installed
on the front passenger seat, first
remember to deactivate the airbag.
Adjust the rear seat as far forward as the
position of the front seat allows.Britax Baby Safe plus
Approval number:
E1 04301146
Fiat order code: 71806415It must be fitted rearward facing using
car's adult seat belts and the
reccomended Isofix base. It must be
fitted in the rear outer seats.
Adjust the rear seat as far forward as the
position of the front seat allows.
++Britax Baby Safe
ISOFIX base
Fiat order code: 71806416
157GETTING TO KNOW
YOUR CARSAFETYSTARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Weight groupChild restraint
systemType of child restraint
systemChild restraint system installation
Group1–from9
up to 18 kg
Fair G0/1S ISOFIX
Approval number:
E4 04443718
Fiat order code for Central
and Southern Europe:
71806647
Fiat order code for
Northern Europe:
71806649
Fiat order code for Eastern
Europe: 71806650It must be fitted rearward facing using
the Isofix platform "L" type, specific for
500L, the car's Isofix anchorages and the
recommended CRS head restraint shown
on the left.
It must be fitted in the rear outer seats.
Adjust the rear seat as far forward as the
position of the front seat allows.
++
Fair ISOFIX RWF
platform, "L" type for
G0/1S
Fiat order code: 71806634
++Fair head restraint
Fiat order code for Central
and Southern Europe:
71806648
Fiat order code for
Northern Europe:
71806652
Fiat order code for Eastern
Europe: 71806653
158GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Weight groupChild restraint
systemType of child restraint
systemChild restraint system installation
Group1–from9
up to 18 kg
Britax Safefix TT
Approval number:
E1 04301199
Fiat order code: 71805956Child restraint system, Isofix universal
with Top Tether
It must be fitted forward facing, using
Isofix anchorages and the upper belt,
provided with the child restraint system.
It must be fitted in the rear outer seats.
For optimum protection please adjust
the rear seat as far back as possible.Britax Roemer
Duo Plus
Approval number:
E1 04301133
Fiat order code: 71803161Child restraint system, Isofix universal
with Top Tether
It must be fitted forward facing, using
Isofix anchorages and the upper belt,
provided with the child restraint system.
It must be fitted in the rear outer seats.
For optimum protection please adjust
the rear seat as far back as possible.
Group2–3from
15 kg to 36 kgFair Junior Fix
Approval number:
E4 04443721
Fiat order code: 71806570It can only be fitted facing forwards, using
the three-point seat belt and the Isofix
attachments, if present in the selected
position.
For optimum protection Fiat suggests
adjusting the rear seat as far back as
possible.
159GETTING TO KNOW
YOUR CARSAFETYSTARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

WARNING
Fit the child seat according to the
instructions, which must be included
with this type of restraint system.
Main recommendations to carry children
safely:
❒Install the child seats on the rear seat, which is the
most protected position in the event of an
accident.
❒Keep children in rearward facing restraint systems
for as long as possible, until 3–4 years old.
❒Should a rearward facing restraint system be
installed on the rear seats, it is advisable to
position it as far forward as the position of the
front seat allows.
❒If the passenger's front airbag is deactivated always
check the warning light on the instrument panel
to make sure that it has actually been deactivated.
❒Carefully follow the instructions supplied with the
child restraint system itself. Keep the instructions
in the car along with the other documents and this
handbook. Do not use second-hand child restraint
systems without instructions.❒Only one child is to be strapped into each
restraint system; never carry two children using
one child restraint system.
❒Always check that the seat belts do not interfere
with the child's throat.
❒Always check that the seat belt is well fastened by
pulling on it.
❒While travelling, do not let the child sit incorrectly
or unfasten the belts.
❒Never allow a child to put the belt's diagonal
section under an arm or behind their back.
❒Never carry children on your lap, even newborns.
No-one can restrain a child in the event of an
accident.
❒In the event of an accident, replace the child
restraint system with a new one.
160GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

AIRBAGThe car is equipped with front airbags for driver and
passenger, driver's knee bag (for versions/markets,
where provided), seat-mounted side airbags for
driver's and passenger pelvis-chest-shoulder
protection (for versions/markets, where provided),
and window airbags for protecting the heads of front
and rear outer occupants.
The location of the airbags on the car is marked by
the writing "AIRBAG" in the middle of the steering
wheel, on the dashboard, on the side trim or on
a label placed next to the airbag deployment area.
FRONT AIRBAGS
The front driver/passenger airbags and the driver's
knee bag (for versions/markets, where provided)
protect the front seat occupants in the event of
frontal impacts of medium/high severity, by placing
the bag between the occupant and the steering
wheel or dashboard.
Therefore non-deployment in other types of impacts
(side impacts, rear shunts, roll-overs, etc.) does not
indicate a system malfunction.
Front (driver and passenger) airbags are not a
replacement for, but are complementary to, the seat
belts, which you are recommended to always wear,
as specified by law in Europe and most non-European
countries.
In the event of impact, those not wearing a seat belt
are projected forwards and may come into contactwith the bag which is still inflating. The protection
offered by the bag is compromised in these
circumstances.
Front airbags may not activate in the following
situations:
❒frontal impacts against highly deformable objects
not involving the front surface of the car (e.g.
wing collision against guard rail, etc.);
❒underride impacts with other vehicles or wedging
under protective barriers (e.g. trucks or guard
rails).
Failure to activate in the conditions described above
is due to the fact that they may not provide any
additional protection compared with seat belts, so
their activation would be inappropriate.
In these cases, non-deployment of the airbag does
not necessarily indicate a system malfunction.
WARNING
Do not apply stickers or other objects
on the steering wheel, on the dashboard
in the passenger airbag area, on roof side trims
or on the seats. Never put objects (e.g. mobile
phones) on the passenger side of the dashboard
since they could interfere with correct inflation
of the passenger airbag and also cause serious
injur y to the passengers.
161GETTING TO KNOW
YOUR CARSAFETYSTARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

IMPORTANT
Do not wash the seats with water or pressurised
steam (by hand or at automatic seat washing
stations).
The front airbags and/or seat-mounted side airbags
may be deployed if the car is subject to violent
impacts involving the underbody area (e.g. violent
impacts against steps or kerbs, big holes or dips
in the road etc.).
When the airbag deploys it emits a small amount of
dust: the dust is harmless and does not indicate
the beginning of a fire. The dust may irritate the skin
and eyes however: in this case, wash with neutral
soap and water.
Airbag checking, repair and replacement must be
carried out at a Fiat Dealership.If the car is scrapped, have the airbag system
deactivated at a Fiat Dealership.
Pretensioners and airbags are deployed in different
ways, according to the type of impact. Failure to
deploy of one or more of the devices does not
indicate a system malfunction.
WARNING
If, when the key is turned to MAR-ON,
the
warning light does not switch
on or stays on whilst driving, a fault may have
occurred in the restraint systems. In this case
the airbags or pretensioners may not be
deployed in an impact or, in a lower number of
cases, they may be deployed accidentally.
Before continuing, contact a Fiat Dealership
immediately to have the system checked.
WARNING
For versions/markets where provided, in
the event of
warning light failure,
the
warning light switches on and the
explosive charges of the passenger airbag are
deactivated.
fig. 148
F0Y0206
165GETTING TO KNOW
YOUR CARSAFETYSTARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

PARKINGProceed as follows:
❒stop the engine and engage the handbrake;
❒engage a gear (first gear if parked uphill or reverse
if facing downhill) and leave the wheels turned.
If the car is parked on a steep slope, it is also
advisable to block the wheels with a wedge or stone.
Do not leave the key in the ignition switch to
prevent the battery from running down.
WARNING
Never leave children unattended in the
car. Always remove the key from the
ignition when leaving the car and take it with
you.HANDBRAKE
The handbrake lever is located between the front
seats.
Pull lever A upwards to operate the
handbrakefig. 149, until the car is braked.
Four or five clicks are generally enough when the car
is on level ground, while ten or eleven may be
required if the car is on a steep slope and laden.
WARNING
If this is not the case, contact a Fiat
Dealership for adjustment .
fig. 149
F0Y0047
171GETTING TO KNOW
YOUR CAR
SAFETYSTARTING AND
DRIVINGWARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

REFITTING THE STANDARD WHEEL
Following the procedure described previously, raise
the car and remove the space-saver wheel.
Versions with steel rims
Proceed as follows:
❒make sure the contact surfaces between standard
wheel and hub are clean so that the fixing studs
will not come loose;
❒fit the standard wheel inserting the 5 studs into
the holes;
❒press-fit the hub cap, aligning the special splining
(on the cap) with the inflation valve;
❒using the wrench provided, tighten the fixing studs;
❒lower the car and remove the jack;
❒using the wrench provided, fully tighten the studs
in the sequence shown previously.Versions with alloy wheels
Proceed as follows:
❒insert the wheel on the hub and using the wrench
provided tighten the studs;
❒lower the car and remove the jack;
❒using the wrench provided, fully tighten the 5 studs
in the sequence shown;
❒reinstall the hub cap, taking care to position the 3
plastic pins in the dedicated seats on the wheel.
Slightly press the cap to prevent any damage to the
plastic pins.
IMPORTANT If it is not fitted properly, the hub cap
may detach itself when the car is running.
After tyre replacement
❒stow the space-saver wheel in the compartment
provided in the boot;
❒insert the jack and the other tools in the
container;
❒arrange the container and tools on the space-saver
wheel;
❒correctly reposition the boot stiff cover.
202GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX