2014 DODGE CHALLENGER warning

[x] Cancel search: warning

Page 79 of 148

DODGE CHALLENGER 2014 3.G User Guide Using HomeLink®
• To operate, press and release the programmed HomeLink® button. Activation will nowoccur for the programmed device (e.g., garage door opener, gate operator, security
system, entry

Page 85 of 148

DODGE CHALLENGER 2014 3.G User Guide Digital Speedometer
• When selected, this screen displays vehicle speed and records top speed.
WARNING!
Measurement of vehicle statistics with the Performance Features is intended for off-
highway o

Page 86 of 148

DODGE CHALLENGER 2014 3.G User Guide ROADSIDE ASSISTANCE
Dial toll-free 1-800-521-2779 for U.S. Residents or 1-800-363-4869 for Canadian Resi-
dents.
• Provide your name, vehicle identification number, license plate number, and your lo

Page 87 of 148

DODGE CHALLENGER 2014 3.G User Guide NOTE:
AFTER INFLATION, THE VEHICLE MAY NEED TO BE DRIVEN FOR 20 MINUTES BEFORE THE
FLASHING LIGHT WILL TURN OFF.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is th

Page 88 of 148

DODGE CHALLENGER 2014 3.G User Guide - Engine Temperature Warning Light
This light warns of an overheated engine condition.
If the light turns on or flashes continuously while driving, safely pull over and stop the
vehicle. If the A/C sy

Page 89 of 148

DODGE CHALLENGER 2014 3.G User Guide - Charging System Light
This light shows the status of the electrical charging system. If the charging system light
remains on, it means that the vehicle is experiencing a problem with the charging sy

Page 91 of 148

DODGE CHALLENGER 2014 3.G User Guide Vehicles Not Equipped With Keyless Enter-N-Go™
• Turn the ignition switch to the ON/RUN position (do not start the engine.)
• Fully depress the accelerator pedal, slowly, three times within 10 s

Page 94 of 148

DODGE CHALLENGER 2014 3.G User Guide Preparations For Jacking
1. Park the vehicle on a firm, level surface as far from the edge of the roadway as possible.Avoid icy or slippery areas.
2. Turn on the Hazard Warning flasher.
3. Set the par