QUICK HELP
8
Changing a wheel
4. OPERATING PROCEDURE
- Remove the trim using the screwdriver F
as a lever.
- Release the bolts using the
wheelbrace E
.
- Position the jack C
at one of the four
locations provided on the underbody
near the wheels.
3. SPARE WHEEL
The spare wheel retaining bolt is located
below the bumper on the right.
- Turn the bolt using the socket A
and the
ratchet wrench B
to release the wheel.
- Turn to the locking point, indicated by
an increase in the force required for the
manoeuvre.
- Take out the spare wheel using the
wrench.
- Unscrew the handle G
and remove the
support H
.
- Release the spare wheel and place it
near the wheel to be changed.
If you have a retractable foot board, the jack
must be positioned at 45°.
- Extend the jack using the ratchet
wrench B
until the wheel is a few
centimetres off the ground.
- Unscrew the bolts fully and change the
wheel.
2
2
2
4
24
SUPPLEMENT
Menu...
Select...
Allows...
12
Service Service
(Km/Miles
before
service) Display of the
kilometres/
miles remaining
before the next
service.
Oil
(Km/Miles
before oil
change) Display of the
kilometres/
miles remaining
before the next
oil change.
ALARM
Anti-tilt protection
Present depending on the engine of your
vehicle, this protection comprises a sensor
that detects any change in inclination of
the vehicle, so as to signal that the vehicle
is being lifted, even partially (to remove a
wheel...).
26
REAR DOORS
180° opening
A system of folding stay that allows the
opening angle to be increased and so if
your vehicle has it, the option allows a wider
opening.
28
SERVICE INDICATOR
Recall the service information
Press the MODE button briefly at any time to
recall the servicing information.
Stop & Start
The Stop & Start system may not be active
straight away after a prolonged period of
several days without use of the vehicle.
43
MODE
Display screen
There is only one, common to all versions of
the vehicle.
You have access to all of the menus.
80
39
82
This document is a supplement to the
current handbook.
This symbol directs you to the colour
of the section and the page of the
handbook containing the detailed
information on a function.
