2014 Citroen DS3 LAMP

39
DS3_en_Chap01_controle-de-marche_ed01-2014
on vehicles fitted with an electric oil level
indicator,  information   on   the   oil   level   is  
d

isplayed   in   the   instrument   panel   for   a   few  
s

econds   when   the   ignition   is   switched   on,   after  
t

he   service   information.
Engine oil level indicator*
The level shown will only be correct
if  the   vehicle   is   on   level   ground   and  
t

he   engine   has   been   off   for   more   than  
3

0 minutes.
Oil level correct
Oil level low
This is indicated by the flashing of " O I L" ,
a ccompanied   by   illumination   of   the   service  
w

arning   lamp,   an   audible   signal   and   a  
m

essage.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
p

revent   damage   to   the   engine.
Refer
  to   the   "Checking   levels"   section.
Oil level indicator fault
This is signaled by the flashing of "OIL- -".
C ontact a CITRoË N dealer or a qualified
workshop.
In the event of a fault with the electric oil level
indicator,
  the   engine   oil   level   is   no   longer  
mon

itored.
While
  the   system   is   faulty,   you   should   check  
t

he   engine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.
*
  Depending   on   version.
Monitoring

41
DS3_en_Chap01_controle-de-marche_ed01-2014
Black panel
System allowing certain displays to be switched off   for   night   driving.
The
  instrument   panel   remains   illuminated   with  
o

nly the vehicle speed and cruise control or
speed
  limiter   information,   if   in   use.
If
  there   is   an   alert   or   a   change   in   a   function  
o

r   to   a   setting,   the   black   panel   mode   is  
i

nterrupted.Activation
F With   the   lighting   on,   press   the   left   hand  b
utton   of   the   instrument   panel   several  
t

imes   to   progressively   reduce   the  
d

ashboard   lighting   level.
F
 
P
ress   the   button   again   to   reduce   the  
l

ighting   to   the   minimum   level   and   switch   off  
t

he   interior   mood   lighting.
F
 
P
ress   the   button   again   to   activate   the   black  
pan

el.
System
 
for
 
manual
 
adjustment
 
of
 
the
 b
rightness
 
of
 
the
 
instruments
 
and
 
controls
 
in
 r
elation
 
to
 
the
 
exterior
 
brightness.
Lighting dimmer
Activation
When the lighting is on:
F  p ress   the   button   to   change   the   brightness  
o

f   the   instruments   and   controls,
F
 
w
hen   the   level   of   brightness   required   is  
r

eached,   release   the   button.
deactivation
When the lighting is off, or in day mode on vehicles   fitted   with   daytime   running   lamps,  
p

ressing   the   button   does   not   have   any   effect.
Monitoring

53
DS3_en_Chap02_ecrans-multifonction_ed01-2014
"Personalisation-
con
figuration"
menu
Once this menu has been selected, you can g
ain   access   to   the   following   functions:
-
 
d
efine   the   vehicle   parameters,
-
 
d
isplay   configuration,
-
 
c
hoice   of   language.
Define the vehicle parameters
Once this menu has been selected, you can activate   or   deactivate   the   following   equipment:
-
 
w
iper   linked   to   reverse   gear   (refer   to   the  
"

Visibility" section),
-
 
g
uide-me-home   lighting   and   duration   (refer  
t

o the " Visibility" section), Example:
  setting   of   the   duration   of   the  
guide-me-home l ighting
F P ress the "5" or " 6" buttons, then the
"OK"
 

button   to   select   the   menu   required.F

P
ress the "
5" or " 6" buttons, then the
"OK"
 
button   to   select   the   "Guide-me-home  
h

eadlamps"
 l
ine.
F
P
ress the "
7" or " 8" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK"
 
button   to   confirm.
F
P
ress the "5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
This menu is also used to reinitialise the tyre u nder-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
-
 
p
arking   sensors   (refer   to   the   "Driving"  
s

ection).
-  
a
utomatic   emergency   braking   (refer   to  
t

he "Safety" section, under "
ac
tive City
Brake").
Multifunction screens

DS3_en_Chap03_ouvertures_ed01-2014
This is indicated by lighting of the courtesy lamps   and   flashing   of   the   direction   indicators  
f

or   a   few   seconds.
Locating your vehicle
F Press   the   closed   padlock   to  l
ocate   your   locked   vehicle   in   a  
c

ar
 par
k.
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has a  special   code.   When   the   ignition   is   switched  
o

n,   this   code   must   be   recognised   in   order   for  
s

tarting   to   be   possible.
This
  electronic   engine   immobiliser   locks   the  
e

ngine   management   system   a   few   minutes  
a

fter   the   ignition   is   switched   off   and   prevents  
s

tarting   of   the   engine   by   anyone   who   does   not  
h

ave   the   key.In the event of a fault, you are
informed
  by   illumination   of   this  
w

arning   lamp,   an   audible   signal   and   a   message  
i

n   the   screen.
In
  this   case,   your   vehicle   will   not   start;   contact  
a

  CITROËN   dealer   as   soon   as   possible.-
 
P
osition   1:   Stop
-
 
P
osition   2:   Ignition
-
 
P
osition   3:   Starting
Ignition switch
keep safely the label attached to
the keys  given   to   you   on   acquisition   of  
t

he   vehicle.

69
DS3_en_Chap03_ouvertures_ed01-2014
System which provides full manual locking or unlocking   of   the   doors   from   the   inside.
Manual central locking
control
Locking
F Press button A  to   lock   the   vehicle.
The   red   indicator   lamp   on   the   button   comes   on.
Unlocking
F Press button A  again   to   unlock   the   vehicle.
The   red   indicator   lamp   on   the   button   switches   off.
If one of the doors is open, central
locking
 
from
 
the
 
inside
 
does
 
not
 
take
 
p

lace. If
  the   vehicle   is   locked   from   the   outside,  
t

he   red   indicator   lamp   flashes   and  
b

utton A   is   inactive.
F
 
I
n   this   case,   use   the   remote   control  
o

r   the   key   to   unlock   the   vehicle.
Automatic central
locking
System which provides full automatic locking or   unlocking   of   the   doors   and   the   boot   while  
d

riving.
You
  can   activate   or   deactivate   this   function.
Locking
When the speed exceeds 6 mph (10 km/h), the doors   and   the   boot   lock   automatically.
Unlocking
F Above  6   mph   (10   km/h),   press   button   A to
unlock   the   doors   and   the   boot   temporarily.
If one of the doors is open, the
automatic
  central   locking   does   not   take  
p

lace.
If   the   boot   is   open,   the   automatic  
c

entral   locking   of   the   doors   is   active.
Driving
 
with
 
the
 
doors
 
locked
 
can
 
make
 
a

ccess
 
more
 
difficult
 
for
 
the
 
emergency
 
s

ervices
 
in
 
the
 
event
 
an
 
emergency.
Access

71
DS3_en_Chap03_ouvertures_ed01-2014
boot
Opening
F After  unlocking   the   vehicle   using   the  r
emote   control   or   the   key,   press   the  
o

pening   control   and   raise   the   tailgate.
closing
F Lower  the   tailgate   using   the   interior   grab  han
dle.
If
  the   tailgate   is   not   closed   correctly:
-

when the engine is running , this
warning   lamp   comes   on,   accompanied b

y   a   message   on   the   multifunction
 s

creen for a few seconds,
- when the vehicle is moving (speed above 6   mph   (10   km/h)),   this   warning   lamp   comes  
o

n,   accompanied   by   an   audible   signal   and  
a

  message   on   the   multifunction   screen   for  
a

  few   seconds. System
  for   mechanical   unlocking   of   the   boot  
i

n   the   event   of   a   battery   or   central   locking  
m

alfunction.
Tailgate release
Unlocking
F Fold  back   the   rear   benchseat   to   gain  a
ccess   to   the   lock   from   inside   the   boot.
F
 
I
nsert   a   small   screwdriver   into   hole   A of the
lock
  to   unlock   the   tailgate.
Access

DS3_en_Chap04_confort_ed01-2014
Rear view mirror
Manual day/night model
Adjustment
F Adjust  the   mirror   so   that   the   glass   is  d
irected   correctly   in   the   "day"   position.
day / night position
F Pull  the   lever   to   change   to   the   "night"   anti-
dazzle   position.
F
 
P
ush   the   lever   to   change   to   the   normal  
"

day"   position. By
  means   of   a   sensor,   which   measures   the  
l

ight   from   the   rear   of   the   vehicle,   this   system  
a

utomatically   and   progressively   changes  
b

etween   the   day   and   night   uses.
Automatic day/night model
In order to ensure optimum visibility d
uring   your   manoeuvres,   the   mirror  
l

ightens   automatically   when   reverse  
g

ear
 i
s
 enga
ged.
As
 
a
 
safety
 
measure,
 
the
 
mirrors
 
s

hould
 
be
 
adjusted
 
to
 
reduce
 
the
 
"blind
 
s

p ot ".
Adjustable
 
mirror
 
providing
 
a
 
central
 
rear ward
 
v

iew.
Equipped
 
with
 
an
 
anti-dazzle
 
system,
 
which
 
d

arkens
 
the
 
mirror
 
glass:
 
this
 
reduces
 
t

he nuisance to the driver caused by the
headlamps
 
from
 
following
 
vehicles,
 
low
 
sun...

DS3_en_Chap04_confort_ed01-2014
5. Air conditioning On / Off
The air conditioning is designed to operate effectively in all seasons,
with
  the   windows   closed.
Electric control panel
F

P

ress the button to recirculate
the
 
interior
 
air.
 
The
 
indicator
 
l

amp
 
comes
 
on
 
to
 
confirm
 
this.
F
 
P

ress
 
the
 
button
 
again
 
to
 
allow
 
fresh
 
air
 
i

nto
 
the
 
passenger
 
compartment.
 
The
 
i

ndicator
 
lamp
 
goes
 
off
 
to
 
confirm
 
this. It
 
enables
 
you   to:
-
 
l

ower
 
the   temperature,   in   summer,
-
 
i

ncrease   the   effectiveness   of   the   demisting  
i

n
 
winter,   above   3   °C.Switching on
F Press the "A /c" b utton, the button's
indicator   lamp   comes   on.
Switching off
F Press the "A /c" button   again,   the   button's  i
ndicator   lamp   goes   off.
Switching
  off   may   affect   comfort   levels  
(

humidity,
 c
ondensation).
The
  air   conditioning   does   not   operate  
w

hen   the   air   flow   adjustment   control   2
is in position " 0".
To   obtain   cooled   air   more   quickly,   you  
c

an use recirculation of interior air for
a   few   moments.   Then   return   to   fresh  
a

ir   intake.