2014 Citroen DS3 eco

39
DS3_en_Chap01_controle-de-marche_ed01-2014
on vehicles fitted with an electric oil level
indicator,  information   on   the   oil   level   is  
d

isplayed   in   the   instrument   panel   for   a   few  
s

econds   when   the   ignition   is   switched   on,   after  
t

he   service   information.
Engine oil level indicator*
The level shown will only be correct
if  the   vehicle   is   on   level   ground   and  
t

he   engine   has   been   off   for   more   than  
3

0 minutes.
Oil level correct
Oil level low
This is indicated by the flashing of " O I L" ,
a ccompanied   by   illumination   of   the   service  
w

arning   lamp,   an   audible   signal   and   a  
m

essage.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
p

revent   damage   to   the   engine.
Refer
  to   the   "Checking   levels"   section.
Oil level indicator fault
This is signaled by the flashing of "OIL- -".
C ontact a CITRoË N dealer or a qualified
workshop.
In the event of a fault with the electric oil level
indicator,
  the   engine   oil   level   is   no   longer  
mon

itored.
While
  the   system   is   faulty,   you   should   check  
t

he   engine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.
*
  Depending   on   version.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
The total and trip distances are displayed for
thirty  seconds   when   the   ignition   is   switched   off,  
w

hen the driver's door is opened and when the
vehicle
  is   locked   or   unlocked.
distance recorders
Total distance recorder
It measures the total distance travelled by the vehicle   since   its   first   registration.
When
 
traveling
 
abroad,
 
you
 
may
 
h

ave
 
to
 
change
 
the
 
units
 
of
 
distance:
 
t

he
 
display
 
of
 
road
 
speed
 
must
 
be
 
in
 
t

he
 
official
 
units
 
(miles
 
or
 
km)
 
for
 
the
 
c

ountry.
 
The
 
change
 
of
 
units
 
is
 
done
 v
ia
 
the
 
screen
 
configuration
 
menu,
 
with
 t
he
 
vehicle
 
stationary.
Trip distance recorder
It measures the distance travelled since it was r
eset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.

DS3_en_Chap01_controle-de-marche_ed01-2014
Trip computer
Monochrome screen A
Information displays
F Press the button, located at the end of the wiper stalk ,
  to   display   the   various   items   of  
t

rip   computer   information   in   succession.The
  trip   computer   provides   the   following  
i

nformation:
-
 ra
nge,
-  
c
urrent   fuel   consumption,
-  
S
top   &   Start   time   counter,
- d istance travelled,
-  
a
verage   fuel   consumption,-
 a

verage
 s
peed.
F  
T
he   next   press   then   returns   you   to   the  
n

ormal
 d
isplay.
System   that   gives   you   information   on   the   current   journey   (range,   fuel   consumption…).
Zero reset
F Press
  the   control   for   more   than   two  s
econds to reset to zero the distance
travelled,
  the   average   fuel   consumption  
a

nd   the   average   speed.

43
DS3_en_Chap01_controle-de-marche_ed01-2014
Monochrome screen c
Information displays
F Press the button, located at the end of the wiper stalk , to display the various trip
computer
  tabs   in   succession. -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  
t
he   current   fuel  
c

onsumption,
●  
t
he   distance   remaining   to  
b

e travelled or the Stop &
Start   time   counter,
-
t
he trip "1"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  
t
he   average   speed,
 f

or   the   first   trip.
-
t
he trip "2"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  
t
he   average   speed,
 f

or   the   second   trip.
F  P ressing   the   button   again   returns   you   to  t
he   normal   display.
16/9 colour screen (eMyWay)
Trip zero reset
F When the trip required is displayed, press
the   button   on   the   end   of   the   wiper   stalk   for  
m

ore   than   two   seconds.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
A few definitions…
Range
(miles or km)
current fuel consumption
(mpg or l/100 km or km/l)
Stop & Start time
counter
(minutes / seconds or hours / minutes)
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
If dashes are displayed continuously
while
 
driving
 
in
 
place
 
of
 
the
 
digits,
 
c

ontact a CITR
oË

N dealer or a
qualified
 w

orkshop.
When
 
the
 
range
 
falls
 
below
 
20
 
miles
 
(30
 
km),
 
d

ashes
 
are
 
displayed.
 
After
 
filling
 
with
 
at
 
least
 
5

 
litres
 
of
 
fuel,
 
the
 
range
 
is
 
recalculated
 
and
 
is
 
d

isplayed
 
when
 
it
 
exceeds
 
60
 
miles
 
(100
 
km).
distance remaining to
destination
(miles or km)
T
his indicates the distance which can still be
travelled
 
with
 
the
 
fuel
 
remaining
 
in
 
the
 
tank
 
in
 
r

elation
 
to
 
the
 
average
 
fuel
 
consumption
 
over
 
t

he
 
last
 
few
 
miles
 
(kilometres)
 
travelled. This
 
is
 
the
 
average
 
fuel
 
consumption
 
during
 
the
 
l

ast
 
few
 
seconds.
This
 
is
 
the   distance   remaining   to   be   travelled  
t

o
 
the
 
final   destination.   It   can   be   entered   by  
t

he user.
If the distance is not entered, dashes are
displayed
  in   place   of   the   digits.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.  
I

t
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on   with   the   key.
distance travelled
(miles or km)
T
his indicates the distance travelled since the
last
 
trip
 
computer   zero   reset.
Average speed
(mph or km/h)
T
his
 
is
 
the   average   speed   calculated   since   the  
l

ast
 
trip
 
computer   zero   reset   (ignition   on).
Average fuel
consumption
(mpg or l/100 km or km/l)
T
his
 
is
 
the
 
average   fuel   consumption   since   the  
l

ast
 
trip
 
computer   zero   reset.
This
 
function   is   only   displayed   from  
20
 
mph
  (30   km/h).

53
DS3_en_Chap02_ecrans-multifonction_ed01-2014
"Personalisation-
con
figuration"
menu
Once this menu has been selected, you can g
ain   access   to   the   following   functions:
-
 
d
efine   the   vehicle   parameters,
-
 
d
isplay   configuration,
-
 
c
hoice   of   language.
Define the vehicle parameters
Once this menu has been selected, you can activate   or   deactivate   the   following   equipment:
-
 
w
iper   linked   to   reverse   gear   (refer   to   the  
"

Visibility" section),
-
 
g
uide-me-home   lighting   and   duration   (refer  
t

o the " Visibility" section), Example:
  setting   of   the   duration   of   the  
guide-me-home l ighting
F P ress the "5" or " 6" buttons, then the
"OK"
 

button   to   select   the   menu   required.F

P
ress the "
5" or " 6" buttons, then the
"OK"
 
button   to   select   the   "Guide-me-home  
h

eadlamps"
 l
ine.
F
P
ress the "
7" or " 8" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK"
 
button   to   confirm.
F
P
ress the "5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
This menu is also used to reinitialise the tyre u nder-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
-
 
p
arking   sensors   (refer   to   the   "Driving"  
s

ection).
-  
a
utomatic   emergency   braking   (refer   to  
t

he "Safety" section, under "
ac
tive City
Brake").
Multifunction screens

DS3_en_Chap02_ecrans-multifonction_ed01-2014
Display configuration
Once this menu has been selected, you can gain   access   to   the   following   settings:
-
 b

rightness-video
 s
etting,
-
 
d
ate   and   time   setting,
-
 
s
election   of   units.
Once
  the   fuel   consumption   units   have  
b

een   changed   to   mpg,   the   information  
i

n   the   screen   relating   to   speed   and  
d

istance   also   changes   to   mph   and  
mil

es
 re
spectively. For
 

safety
 
reasons,
 
configuration
 
by
 
the
 d

river   of   the   multifunction   screen   must  
o

nly   be   done   when   stationary.
choice of language
Once this menu has been selected, you can change   the   language   used   by   the   screen   by  
c

hoosing   one   from   a   defined   list.With
  Audio   system   on,   once   this   menu   is  s
elected   you   can   configure   your   Bluetooth  h
ands-free   system   (pairing),   view   the   various  
t

elephone   directories   (list   of   calls,   services...)  
a

nd   manage   your   calls   (call,   hang   up,   second  
c

all,   secret   mode...).
For
  more   information   on   the   "Telephone"  
f

unction,   refer   to   the   "Audio   system"   section.
"Telephone" Menu
Setting the date and time
F Sel ect the " Set date and time" function
using
  the   "5 " or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
A
djust   the   settings   one   by   one   using  
the " 7" or " 8"
  button   then   confirm  
with "OK" .
F

T
hen select the "OK"
 
box   in   the   screen  
a

nd   confirm.

DS3_en_Chap03_ouvertures_ed01-2014
Remote control keySystem which permits central unlocking or locking of the vehicle using the lock or from a distance. It is also used to locate and start the vehicle, as well as   providing   protection   against   theft.
Unlocking the vehicle
Unfolding the key
F First  press   this   button   to   unfold   the   key.
Unlocking using the remote
control
Unlocking using the key
F Press  the   open   padlock   to   unlock  t
he   vehicle.
F
 
T

urn
 
the   key   to   the   left   in   the   driver's   door  
l

ock
 
to   unlock   the   vehicle.
Unlocking
  is   confirmed   by   rapid   flashing   of  
t

he
 
direction   indicators   for   approximately  
t

wo
 
seconds.
According
  to   version,   the   door   mirrors   unfold   at  
t

he
 
same
 
time.