287
Level 1
Level 2
Level 3
Comments
Display Off Choose to switch off the screen.
To switch it back on, touch the screen or press any button.
System Time Choose adjustment of the time by the RDS signal, time zone, summer
time.
Language Select the language (English, Français, Deutsch, Nederlands,
Português, Español, Svenska, Italiano, Dansk, Vlaams, Polski, Norsk).
Pairing Select an authorisation "Select Device to Connect", "Register Device",
"Set Passkey: Fixed", "Set Passcode".
Units Select the units for the calculation of distances (km or miles and °C
or °F).
Keyboard Layout Select the type of input keyboard (alphabet or PC).
Reset all Restore factory settings.
After reinitialisation, restart the system.
TP Standby Select the traffi c information (TP) setting: on or off.
Picture Control Brightness
Adjust the image settings for: brightness, contrast, black level.
Contrast
Black Level
Clock Screen
319
04 RADIO
Selecting radio source
Press the RADIO
button to switch on
the radio.
Press the RADIO
button repeatedly
to select the waveband; it changes in
the following order: FM1 / FM2 / FM3 /
MW / LW / FM1...
Automatic station search
Manual station search
Turn the SEL
knob to the left to search
the lower frequencies or to the right to
search the higher frequencies.
Press the "
" or "
" button to search
the lower frequencies or the higher
frequencies respectively.
The search begins automatically and
stops at the fi rst station found.
Selecting the waveband
Selection / Presetting
320
04
Press one of the six buttons "1" to "6" until an
audible signal is heard.
The sound cuts out then becomes audible again
when the station has been preset.
The number of the button and the associated radio
frequency appear in the screen.
Manual station presetting
To recall the pre-set stored setting, press the button and release it
within two seconds.
RADIO
You can preset up to six stations on each waveband.
Presetting a new station replaces the previous station.
Automatic station presetting
Disconnecting the battery terminals clears the preset radio stations.
Stations can only be preset automatically on wavebands FM1, FM2
and FM3.
Presetting new stations replaces the previous stations.
This presetting can be activated automatically irrespective of the
waveband selected.
Press the RADIO
button for more than
two seconds.
The six stations offering the best
reception are preset and classifi ed
from the weakest to the strongest on
the six corresponding buttons.
Recalling preset stations
Press one of the six buttons "1" to "6". The station
corresponding to the waveband selected appears on
the screen.
324
04 RADIO
Changing the display language of the "PTY" programme
Functions setting mode
This permits activation or deactivation
of the functions below.
Press the SEL
knob repeatedly; the
setting mode for the functions changes
in the following order : GRACENOTE
DB / AF / REG / TP-S / PI-S / PTY
(languages) / PH setting / CT / OFF.
The functions setting mode is deactivated after approximately
10 seconds without any action.
Press the MENU
button.
Press the SEL
knob repeatedly to
select the PTY lang
mode.
Turn the SEL
knob to select the
language (ENGLISH, FRANCAIS,
DEUTSCH, SVENSK, ESPAGNOL,
ITALIANO).
Press then MENU
button.
Turn the SEL
knob to the left to
deactivate the function ("OFF") or to
the right to activate it ("ON").
326
05 MUSIC MEDIA PLAYERS
Random playing of a disc
Press the RDM
button to start random
play of the tracks on the disc. "RDM"
appears in the screen.
To exit this mode, press this button
again.
Audio CD
Press and hold the "
" or "
" button
to carry out a fast backwards or
forwards search respectively.
Play begins when the button is
released.
Fast search
Press the "
" or "
" button to select
the previous or next track respectively.
Selecting a track
Press the RPT
button to repeat
the play of the current track. "RPT"
appears in the screen.
To exit this mode, press this button
again.
Repeating a track
Playing the beginning of each track
Press the PTY/SCAN
button to start
playback of the fi rst ten seconds
of each track on the disc. "SCAN"
appears in the screen and the
corresponding track number fl ashes.
To exit this mode, press this button
again.
On CD-R/RWs, the quality of the playback sound depends on the
encoding software, the burning device and the burning speed used.
328
05 MUSIC MEDIA PLAYERS
Repeating the tracks in a folder
Press the RPT
button for more than
two seconds to repeat the playing of
the tracks contained in the current
folder. "D-RPT" appears in the screen.
To exit this mode, press this button
again.
Press the RDM
button to start random
playing of the tracks in the current
folder. "RDM" appears in the screen.
To exit this mode, press this button
again.
Playing the beginning of each track
MP3 / ID3 Tag display
Press the DISP
button repeatedly;
the MP3 information appears in the
following order:
FOLDER NAME / TRACK NAME /
NORMAL DISPLAY MODE.
Press the PTY/SCAN
button to start
playing the fi rst ten seconds of each
track in all of the folders. "SCAN"
appears in the screen and the
corresponding track number fl ashes.
To exit this mode, press this button
again.
Random playing of a folder
Random playing of a disc
Press the RDM
button for more than
two seconds to start random playing of
the tracks in all of the folders. "D-RDM"
appears in the screen.
To exit this mode, press this button
again.
When play begins, "READING" appears in the screen then
disappears to make way for the folder number, the track number,
the playing time and "MP3".
331
06
Once the portable player / iPod ®
is
connected, make several successive
presses on the MEDIA
button and
select USB, the source selected is
displayed.
Once the player is selected, play
starts.
Play
Managing a track (or folder)
Stop
Press MEDIA
to change mode or on
RADIO
.
Turn the knob to select a previous or
next track.
Select a folder (or track)
Select a track
Press the knob to select the folder
and go down or up one level.
The knob can also be used for tracks.
USB PLAYER
Press the "
" or "
" button to select
the previous or next track respectively.
Press and hold to go faster.
Playing the start of each track
Press the PTY/SCAN
button to start
the play of the fi rst ten seconds of each
track in all folders. "SCAN" appears in
the screen and the corresponding track
number fl ashes.
Press this button again to quit this
mode.