5
6
Visibility
Headlamp adjustment
To avoid causing a nuisance to other road users, the headlamp beams should be adjusted according to the load in the vehicle. This adjustment can be carried out using the control located: - under the bonnet, - below and to the left of the steering wheel (depending on version).
The initial setting is position "0" .
0 1 or 2 people in the front seats. - 5 people. 1 5 people + maximum authorised load in the boot. - Driver + maximum authorised load in the boot. The higher number positions can be used, but may limit the field of illumination of the headlamps.
Under the bonnet
Raise the bonnet for access to the control (one per headlamp). Turn the control to adjust the height of the headlamp beam.
Travelling abroad
The design of the dipped beam headlamps allows, without modification, driving in a country that drives on the other side of the road to the country in which your vehicle was sold. To the left of the steering wheel
