
Interior equipmentVehicle equipmentAll standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equip‐
ment is also described that is not available in a
vehicle, e. g., because of the selected optional
equipment or country variant. This also applies
for safety-related functions and systems.
Universal garage door
opener
The concept
The universal garage door opener can operate
up to 3 functions of remote-controlled sys‐
tems such as garage door drives or lighting
systems. The universal garage door opener re‐
places up to 3 different hand-held transmitters.
To operate the remote control, the buttons on
the interior rearview mirror must be program‐
med with the desired functions. The hand-held
transmitter for the particular system is required
in order to program the remote control.
During programming
During programming and before activat‐
ing a device using the integrated universal re‐
mote control, ensure that there are no people,
animals, or objects in the range of movement
of the remote-controlled device; otherwise,
there is a risk of injury or damage.
Also follow the safety instructions of the hand-
held transmitter.◀
Before selling the vehicle, delete the stored
functions for the sake of security.
Compatibility If this symbol is printed on the packag‐
ing or in the instructions of the system
to be controlled, the system is gener‐ally compatible with the universal garage door
opener.
If you have any questions, please contact:▷Your service center.▷www.homelink.com on the Internet.
HomeLink is a registered trademark of John‐
son Controls, Inc.
Controls on the interior rearview
mirror
▷LED, arrow 1.▷Buttons, arrow 2.▷The hand-held transmitter, arrow 3, is re‐
quired for programming.
Programming
General information
1.Switch on the ignition.2.Initial setup:
Press and hold the left and right button on
the interior rearview mirror simultaneously
for approximately 20 seconds until the LED
on the interior rearview mirror flashes. This
erases all programming of the buttons on
the interior rearview mirror.3.Hold the hand-held transmitter for the sys‐
tem to be controlled approx. 1 to 3 in/2.5 to
8 cm away from the buttons on the interiorSeite 149Interior equipmentControls149
Online Edition for Part no. 01 40 2 925 793 - II/14 

rearview mirror. The required distance de‐
pends on the manual transmitter.4.Simultaneously press and hold the button
of the desired function on the hand-held
transmitter and the button to be program‐
med on the interior rearview mirror. The
LED on the interior rearview mirror will be‐
gin flashing slowly.5.Release both buttons as soon as the LED
flashes more rapidly. When the LED is
flashing faster, this indicates that the but‐
ton on the interior rearview mirror has been
programmed.
If the LED does not flash faster after at
least 60 seconds, change the distance be‐
tween the interior rearview mirror and the
hand-held transmitter and repeat the step.
Several more attempts at different distan‐
ces may be necessary. Wait at least
15 seconds between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior rearview mirror button
and repeatedly press and release the
hand-held transmitter button for 2 sec‐
onds.6.To program other functions on other but‐
tons, repeat steps 3 to 5.
The systems can be controlled using the inte‐
rior rearview mirror buttons.
Special feature of the alternating-
code wireless system
If you are unable to operate the system after
repeated programming, please check if the
system to be controlled features an alternat‐
ing-code system.
Read the system's operating manual, or press
the programmed button on the interior rear‐
view mirror longer. If the LED on the interior
rearview mirror starts flashing rapidly and then
stays lit constantly for 2 seconds, the system
features an alternating-code system. Flashing
and continuous illumination of the LED will re‐
peat for approximately 20 seconds.
For systems with an alternating-code system,
the universal garage door opener and the sys‐
tem also have to be synchronized.
Please read the operating manual of the sys‐
tem being set up for information on how to
synchronize the system.
Synchronizing is easier with the aid of a sec‐
ond person.
To synchronize:1.Park the vehicle within range of the re‐
mote-controlled system.2.Program the relevant button on the interior
rearview mirror as described.3.Locate and press the synchronizing button
on the system being programmed. You
have approx. 30 seconds for the next step.4.Hold down the programmed button on the
interior rearview mirror for approximately
3 seconds and then release it. If necessary,
repeat this work step up to three times in
order to finish synchronization. Once syn‐
chronization is complete, the programmed
function will be carried out.
Reprogramming individual buttons
1.Switch on the ignition.2.Press and hold the interior rearview mirror
button to be programmed.3.As soon as the interior rearview mirror LED
starts flashing slowly, hold the hand-held
transmitter for the system to be controlled
approx. 1 to 3 in/2.5 to 8 cm away from the
buttons on the interior rearview mirror. The
required distance depends on the manual
transmitter.4.Likewise, press and hold the button of the
desired function on the hand-held trans‐
mitter.5.Release both buttons as soon as the inte‐
rior rearview mirror LED flashes more rap‐
idly. When the LED is flashing faster, thisSeite 150ControlsInterior equipment150
Online Edition for Part no. 01 40 2 925 793 - II/14 

Engine oil filler neck 202 
Engine oil temperature  79 
Engine oil types, alterna‐ tive  203 
Engine oil types, ap‐ proved  203 
Engine start during malfunc‐ tion  33 
Engine start, jump-start‐ ing  220  
Engine start, refer to Starting the engine  63 
Engine stop  63 
Engine temperature  79 
Entering a car wash  225 
Equipment, interior  149 
ESP Electronic Stability Pro‐ gram, refer to DSC  115 
Exchanging wheels/tires  196 
Exhaust system  169 
Exterior mirror, automatic dimming feature  56 
Exterior mirrors  55 
External start  220 
External temperature dis‐ play  80 
External temperature warn‐ ing  80 
Eyes for securing cargo  172 
F
Failure message, refer to Check Control  77 
False alarm, refer to Uninten‐ tional alarm  43 
Fan, refer to Air flow  143, 147  
Fault displays, refer to Check Control  77 
Filler neck for engine oil  202 
Fine wood, care  227 
First aid kit  220 
Fitting for towing, refer to Tow fitting  223 Flat tire, changing
wheels  216 
Flat Tire Monitor FTM  101 
Flat tire, Tire Pressure Moni‐ tor TPM  98 
Flat tire, warning lamp  99, 102  
Flooding  169 
Floor carpet, care  228 
Floor mats, care  228 
Fogged up windows  143 
Fold-out position, windshield wipers  69 
Foot brake  169 
Front airbags  95 
Front fog lamps  93 
Front fog lamps, bulb replace‐ ment  212 
Front lamps  209 
Front passenger airbags, au‐ tomatic deactivation  97 
Front passenger airbags, indi‐ cator lamp  97 
FTM Flat Tire Monitor  101 
Fuel  186 
Fuel cap  184 
Fuel consumption, current  81 
Fuel consumption, refer to Average fuel consump‐
tion  85 
Fuel filler flap  184 
Fuel gauge  79 
Fuel quality  186 
Fuel recommendation  186 
Fuel, tank capacity  233 
Fuse  217 
G
Garage door opener, refer to Universal garage door
opener  149 
Gasoline  186 
Gear change, automatic transmission  71 
Gear shift indicator  82 General driving notes  168 
Glass sunroof, refer to Panor‐ amic glass sunroof  45 
Glove compartment  159 
Gross vehicle weight, ap‐ proved  232 
H
Handbrake, refer to parking brake  66 
Hand-held transmitter, alter‐ nating code  150 
Hazard warning flashers  219 
Head airbags  95 
Headlamp control, auto‐ matic  91 
Headlamp courtesy delay fea‐ ture  90 
Headlamp flasher  67 
Headlamp glass  208 
Headlamps  209 
Headlamps, care  226 
Headlamp washer system  67 
Headliner  15 
Head restraints  48 
Head restraints, front  52 
Head restraints, rear  53 
Head-up Display  88 
Head-up Display, care  228 
Heavy cargo, stowing  172 
Height, vehicle  232 
High-beam Assistant  92 
High beams  67 
High beams/low beams, refer to High-beam Assistant  92 
Hills  170 
Hill start assistant, refer to Drive-off assistant  119 
Hints  6 
Holder for beverages  161 
Homepage  6 
Hood  200 
Horn  12 
Hot exhaust system  169 
HUD Head-up Display  88 Seite 237Everything from A to ZReference237
Online Edition for Part no. 01 40 2 925 793 - II/14