2014 AUDI TT COUPE fuel reserve

Downloaded from www.Manualslib.com manuals search engine 0
N
co
....
\D L/'l
N
L/'l
.... the
next gear at lower engine speeds. Earlier up­
shifts give improved fuel economy because the
full power reserves of the engine are not used.
In this mode, Eis shown on the display instead of
D ¢Fig. 76.
A WARNING
- The car can roll away even if the ignition is
switched off.
- Never move the selector lever to R or P
when driving, as this could cause an acci­
dent.
- In all selector lever positions except P the
vehicle must always be held with the foot
brake when the engine is running. This is be­
cause an automatic gearbox still transmits
power even at idling speed, and the vehicle
tends to "creep" -risk of accident!
- The accelerator pedal must on no account
be pressed inadvertently when a gear is en­
gaged with the vehicle stationary . The vehi­
cle could otherwise start moving immedi­
ately (in some cases even if the parking
brake is engaged) and possibly cause an ac­
cident.
- Do not press the accelerator while selecting
a gear with the vehicle stationary and the
engine running, as this could cause an acci­
dent.
- The driver should never get out of the vehi­
cle when the engine is running and a gear is
engaged. If you have to leave your vehicle
while the engine is running, you must apply
the parking brake and engage the parking
lock P.
- To avoid accidents, apply the parking brake
and put the selector lever in position P be­
fore opening the bonnet and working on the
vehicle with the engine running. Please ob­
serve the important safety warnings
¢ page 220, Working on components in
the engine compartment.
((D) Note
- Drive select: You can select the sport pro­
gram for gear changes by activating the dy- Automatic
gearbox
namic mode. The infotainment display will
show S instead of D.
- If the lever is moved accidentally to N when
driving, take your foot off the accelerator
and let the engine speed drop to idling be­
fore selecting Dor S again.
- It is not possible to move the selector lever
out of position P if the electrical power sup­
ply fails. In this case, the selector lever can
be released manually. Left-hand drive
vehicles ¢ page 78, right-hand drive
vehicles ¢ page 79.
Selector lever lock
Applies to vehicles: with S tronic gearbox
The selector Lever Lock prevents gears from being
engaged inadvertently, so that the vehicle is not
set in motion unintentionally.
•
Fig. 77 Selector lever lock
The sele ctor lever lock is released as follows:
... Switch on the ignition.
... Pr ess the brake pedal and at the same time
press in the interlock button.
Automatic selector lever lock
The sele ctor lever is locked in the P and N posi­
tions when the ignition is on. To move the selec­
tor lever out of these positions the driver must
press the brake pedal. To move out of position P,
the interlock button must also be pressed. The
following message appears in the display as a re­
minder for the driver when the selector lever is in
position P or N:
To select a gear please press brake pedal and in-
terlock button on gear selector lever
..,.
71

Downloaded from www.Manualslib.com manuals search engine Navigation
Always display alternative routes
When this function is switched on, up to three
route suggestions are displayed on the map
¢page 155.
Filling station message
When the fuel gauge is in the reserve zone, a
message will appear when this function is on.
Confirm this message, and a list of nearby filling
stations will be displayed. When you select one
of the filling stations, the route to this station
will be calculated based on the current position
of your car.
Delete myAudi special destinations*
Destinations that you import from your myAudi
account to your MMI are automatically saved.
You can delete them individually or all at once.
Presentation mode
Use the Presentation mode to plan and "drive" a
journey effectively without the need to move the
vehicle. You can choose your start Location man­
ually (Select start location) if, for example, you
would like to calculate a route starting from a dif­
ferent position than the current position of the
vehicle. Start the Presentation mode to simulate
a route guidance.
Input help
When this function is switched on�, you can re­
ceive additional help when entering a destination
using the search function ¢page 148. It allows
you to have list entries transferred to the entry
line. Input help is activated when the vehicle
Leaves the factory.
Route criteria
Applies to vehicles: with navigation system
.,.. Press the I NAV/MAP!
button repeatedly until
the Enter destination menu is displayed
c> page 147, Fig. 141.
.,.. Select: right control button > Route criteria.
Traffic avoidance
- automatic: The route is automatically opti­
mised using the current traffic information. If
154 the
MMI system does not display a detour route
although the automatic traffic avoidance func­
tion is on and a traffic jam has been reported on
the planned route, this is because the estima­
ted time required for the detour is Longer than
the delay on the route with the traffic jam.
- manual: The MMI indicates that a better route
is available and informs you of the potential
time saving ¢page 160. You can then choose
which route you would like to use.
- off: The route is not updated automatically. No
optimised route is suggested.
Motorways/Vignette roads/Toll roads/Ferries/
Motorail: If you do not wish for the navigation
system to include motorways, vignette/toll
roads, ferries or car trains when calculating the
route, you can select the option avoid. You can al­
so use the Vignette roads option to set the coun­
tries for which you possess a vignette.
Time restricted
- avoid: Roads that are closed at certain times of
the day (e.g. pedestrian zones) are excluded
from the route calculation.
- automatic: The MMI system determines wheth­
er the restricted road can be included in the
route calculation based on the time tables stor­
ed in the navigation data.
- with: Roads that are closed at certain times of
the day are included in the route calculation.
Seasonally restricted
- avoid: Roads that are closed seasonally (e.g.
mountain passes) are excluded from the route
calculation.
- automatic: The MMI system determines wheth­
er the seasonally restricted road can be inclu­
ded in the route calculation based on the time
tables stored in the navigation data.
- with: Roads that are closed seasonally are in­
cluded in the route calculation.
Voice guidance
Applies to vehicles: with navigation system
.,.. Press the I NAV/MAP!
button repeatedly until
the Enter destination menu is displayed
¢page 147, Fig.141.