2014 AUDI TT COUPE navigation system

Downloaded from www.Manualslib.com manuals search engine 0
N
co
....
\D L/'l
N
L/'l
.... Navigation
Online traffic information
Applies to vehicles: with navigation system and Audi connect
The MMI system can receive real-time information from the Internet regarding traffic congestion, ac­
cidents, roadworks and other incidents.
Wu rmt alst raBe
Fig. 151 Online traffic information on the map
Important: The requirements for Audi connect
must be met ¢page 137.
.,. Press the I NAV
/
MAP !
button repeatedly until
the map is displayed.
- To switch on online traffic information: Press
the right control button and turn Online traffic
data on(�).
- To switch on the traffic map display: To have
the traffic information displayed in the best
possible way, select the I NAV
/MAP !
button >
right control button > Map settings > Map dis­
play > Traffic.
You can also have the online traffic information
displayed on the Google Earth map display
¢ page 159 or the standard map¢ page 156,
Fig. 148.
Symbol ©¢ Fig. 151 on the infotainment dis­
play indicates the reception of Online traffic in­
formation. If Online traffic information cannot
be received, the traffic information will automati­
cally be received via TMC/TMCpro ¢page 160.
Traffic information display
@ Green : no obstructions
@ Red: traffic jam
@ Orange: slow-moving traffic Harlac
Hatched markings show the stretch of road affec­
ted by the traffic obstruction .
Coloured warning symbols: A traffic obstruction
is ahead (when route guidance is active).
Greyed out warning symbols: Traffic obstruc­
tions that are not relevant for your route.
Red warning symbols: If route guidance is not
active, all warning symbols are shown in red.
You can adjust the settings for the display of the
coloured markings, warning symbols etc. in the
Map content menu ¢ page 158.
The traffic information is activated when the ve­
hicle leaves the factory. You can switch off the re­
ception of on line traffic information at any time
¢page 152.
(©) Note
- Please observe the notes in the chapter
Notes on Audi connect ¢page 145.
- Every vehicle with active Online traffic data
contributes to specifying and predicting the
traffic situation as precisely as possible. For
this purpose, information on the position of
your vehicle is encrypted and transmitted
anonymously to the traffic data providers at
regular intervals. Should you not wish this ..,_
161

Downloaded from www.Manualslib.com manuals search engine Navigation
to happen, you can switch off the on line
traffic information function at any time.
- The online traffic information network is
not yet available in all countries or areas. Further
information can be found on the In­
ternet at www.audi.com/connect.
Troubleshooting
Applies to vehicles: with navigation system
Subject Advice
Search function: The desired des-The
destination may not be stored in the navigation database. Or:
ti nation cannot be found.
Check that you have spelt the search term correctly and that the
desired country has been selected for the search function via the
Country selection option ¢ page 152.
162

Downloaded from www.Manualslib.com manuals search engine System
settings
System settings
Setting the date and
time
The time can be set manually or via CPS.
.,. Select: I MENU I button >Settings > left control
button > MMI settings > Date & time.
Set automatically
The time and date are automatically updated
when this function is switched on.
Time The Time can be set manually. The Set automati­
cally function must be deactivated to do this.
Date
The Date can be set manually. The Set automati­
cally function must be deactivated to do this.
Time zone
When selecting the correct time zone, a list of
corresponding countries is displayed as an exam­
ple.
Automatic time zone*
When the automatic time zone option is activa­
ted, the time is automatically adjusted to the rel­
evant time zone.
Time format
When this option is set to 24h, for example
13:00 will be displayed as the time. When it is
set to AM/PM, for example 1:00 PM will be dis­
played.
Date format
When this option is set to TT. MM.YYYY, for ex­
ample 31.12.2013 will be displayed as the date.
When it is set to MM/DD /JJJJ, for example
12/31/ 2013 will be displayed. When it is set to
JJJ- MM-DD , for example 2013-12-31 will be dis­
played.
MMI settings
.,. Select: I MENU I button >Settings > left control
button > MMI settings.
186 Language
You can change the language of the display along
with the language of the navigation cues* and
the speech dialogue system*.
The number of languages available depends on
the market .
Meas urem ent units
The following measurement units are available:
- Speed (km/h or mph)
- Dist ance (km or miles)
- Temperature (0
( or °F)
- Consumption (ltr/100 km, mpg (US), mpg (UK)
or km/ltr)
- Cap acity (litres, gallons)
Usage tips
Your MMI displays usage tips when this function
is switched on�. They will appear less often as
time goes by. You can switch the usage tips off at
any time.
Speech dialogue system*
Command display: The display of possible com­
mands during a speech dialogue can be switched
on/off.
Short dialogue: This option can be switched on/
off. When it is activated, the spoken cues played
by the system are shortened.
Speech dialogue system volume: Turn the rotary
pushbutton to adjust the volume of the spoken
cues.
Individual speech training (only possible when
the vehicle is stationary): You can use the individ­
ual speech training to adapt the speech dialogue
system to your voice or pronunciation so that the
speech dialogue system can then better recog­
nise what you are saying. The individual speech
training prompts you to repeat 20 spoken phra­
ses that consist of certain commands and blocks
of digits. If you would like to delete the stored
speech training setup, you can use the function
Reset speech training.
...,

Downloaded from www.Manualslib.com manuals search engine 0
N
co
....
\D L/'l
N
L/'l
.... Factory
settings
You can reset the following functions to the fac­
tory settings:
- Sound settings
-Radio
- Media settings
-Jukebox*
- Directory*
- Telephone*
- Bluetooth and Wi-Fi*
- Navigation settings*
- Navigation and online memory*
- Speech dialogue system*
- Message settings*
-Apps*
- Usage tips
- Audi connect*
You can select the desired options individually or
mark Select all entries. Select and confirm Re­
store factory settings.
i Note
Please note that not only settings will be de­
leted when you do this;
saved
data may also
be erased.
Connection manager
Introduction
The connection manager gives you an overview
of your connected devices and their connection
status.
.. Select: I MENU
I button
>Settings> left control
button > MMI settings > Connection manager.
If a mobile device has already been connected, its
name and connection mode is displayed under
the relevant menu item.
Telephone
- Connect new device: You can search for and
connect a mobile phone.
- List of devices already bonded: Select your mo­
bile phone from the list of all devices which System
settings
have already been bonded. Or: Insert a SIM
card in the SIM card reader¢ page 126.
Data connection
Applies to vehicles: with Audi connect
- Connect new device: You can search for and
connect a mobile device (e.g. a smartphone).
- List of devices already bonded: Select your mo­
bile phone from the list of all devices which
have already been bonded. Or: Insert a SIM
card in the SIM card reader¢ page 138.
MMI connect app
Applies to vehicles: with Audi connect
Important: The Audi MMI connect app must be
installed on your mobile device and have been
started.
- Connect new device: You can search for and
connect a mobile device (e.g. a smartphone).
- List of devices already bonded: Select your mo­
bile device from the list of all devices which
have already been bonded.
Music
Applies to vehicles: with Bluetooth audio player or Wi-Fi au­
dio player
Audio player*
Important: The Bluetooth function and the dis­
coverability option of the MMI system
¢ page 188 and the mobile phone must be acti­
vated.
- To connect a new device: Press the rotary push­
button. Select Bluetooth audio player. Search
for and connect a new device.
- List of devices already bonded: Select a Blue­
tooth device from the list of all devices which
have already been bonded.
Wi-Fi audio player*
Important: The Wi-Fi hotspot on the MMI system
¢ page 143 and your mobile phone must be acti­
vated.
- To connect a new device: Press the rotary push­
button. Search for and connect a Wi-Fi enabled
device. ...,.
187

Downloaded from www.Manualslib.com manuals search engine 0
N
co
....
\D U'l
N
U'l
.... (D
Note
Some SIM cards do not allow the SIM PIN
query to be deactivated.
System update .,.
Sele
ct: I M
ENU I button >Settings > left control
button > System maintenance.
- System update: Insert the storage medium
with the update data into the appropriate drive
¢ page 169. Select and confirm the appropri­
ate drive> Start update. The duration of this
process depends on the size of the update.
- Reset driver installation: The media driver
package selected is reset to the factory de­
faults.
- Version information: Information on the soft­
ware version of the M MI and the navigation da­
tabase* are displayed. In addition, you can use
the Software information function to display
information on the MMI's software and
licence
conditions.
On-board handbook
Applies to vehicles: with On-board Handbook
The On-board Handbook includes the Owner's
Manual for your

vehicle.
Installing/updating the On-board Handbook
Important: The storage medium on which the
On-board Handbook is stored must have been in­
serted into the relevant drive¢ page 169.
.,. Select:
I MENU I button >Settings > left control
button > System maintenance > System up­
date > SD card 1, SD card 2, CD/DVD* or USB* .
.,. Follow the directions given by the system.
Starting the Hand book
Important: The Handbook must have been instal­
led previously .
.,. Select: I
MENU I button >Car> left control but-
ton > Handbo ok.
The On-board Handbook will automatically load
in the language that is set under the option Menu
language in the MMI ¢ page 186. System
settings
Using the On-board Handbook
The following functions are available when you
are operating the On-board Handbook using the
rotary pushbutton:
- Select and confirm an entry: Turn the rotary
pushbutton to the entry you require and press
the rotary pushbutton.
- Show a picture in full size: Turn the rotary
pushbutton to the desired picture and press the
rotary pushbutton.
- Call up the options menu: You can return to
the Home page, Refresh the content in the On­
board Handbook, Cancel refresh of the content
and open the Index.
A WARNING
Not paying attention to the road traffic can
lead to serious accidents and loss of life. Only
use the On-board Handbook when the traffic
conditions allow you to do so safel y. You must
maintain proper control of your vehicle at all
times. As the driver, you bear the responsibili­
ty for road safety.
� Note
- The On-board Handbook is not available in
all countries. Your Audi dealer will be able
to provide you with more detailed informa­
tion.
- Switch off the ignition while you are instal­
ling/updating the On-board Handbook.
- Please note that the On-board Handbook is
not a substitute for the printed Owner's
Manual.
189

Downloaded from www.Manualslib.com manuals search engine System
settings
Sound settings
You can adjust the sound and volume of the MMI
individually. The settings depend on the equip­
ment fitted in your vehicle.
Fig. 170 Adjusting balance/fader
... Select: I MENU
I button
> Sound > Left control
button > Entertainment.
Treble/Bass
You can adjust the settings for Treble and Bass by
turning the rotary pushbutton. Any changes to
the settings only apply to the audio source cur­
rently active. This allows you to set the sound for
each audio source separat ely.
Bal ance/fader (sound focus}
- To set the left/right volume ratio: Press the ro­
tary pushbutton. Turn the rotary pushbutton
clockwise or anti-clockwise to the desired posi­
tion.
- To set the front/rear volume ratio: Press the
rotary pushbutton again. Turn the rotary push­
button clockwise or anti-clockwise to the de­
sired position.
- To set the volume ratio using MMI touch:
Move your finger in the desired direction on the
MMI touch pad.
Speed dependent volume control
You can adjust the automatic volume adaption to
the interior noise level by turning the rotary
pushbutton.
190 Volume
settings
Adjusting the volume
Using the ON/OFF button, you can adjust the vol­
ume of an audio source or system message (e.g.
during a speech dialogue) directly while it is be­
ing played.
- Volume up/down: Turn the ON/OFF button@
¢page 109, Fig. 113 clockwise or anti-clock­
wise.
- Mute/pause: Briefly press the ON/OFF button.
Or: Turn the ON/OFF button anti-clockwise until
the mute symbol appears. Any active audio/vid­
eo source will then be paused .
- Unmute/resume: Briefly press the ON/OFF but­
ton. Or: Turn the ON/OFF button clockwise.
� Note When you switch on the MMI system, very
high/very Low volume Levels are automatically
reduced/increased to a preset Level.
Adjusting the system volume
... Select: I MENU
! button > Sound > Left control
button.
Telephone Mute telephone: Messages and ring tones are si­
lenced.
Ring tone: Refer to¢ page 135, Ring tone and
volume settings.
Ring tone volume: Turn the rotary pushbutton to
adjust the volume of the ring tone selected.
Message volume: Turn the rotary pushbutton to
adjust the volume of the tone indicating receipt
of a text message.
Microphone input level: Turn the rotary pushbut­
ton to adjust the volume of a telephone call while
you are on the phone.
Navigation
Voice guidance: Refer to¢ page 154, Voice guid-
ance. ...,.

Downloaded from www.Manualslib.com manuals search engine 0
N
co
....
\D U'l
N
U'l
.... Voice
guidance during calls: Refer to
¢ page 154, Voice guidance.
Volume of spoken cues: Turn the rotary pushbut­
ton to adjust the volume of the spoken cues while
route guidance is active.
Entertainment fader: This option allows the vol­
ume of the current audio source to be temporari­
ly reduced when the parking aid is active or while
a navigation cue is being played.
Announcements
Traffic announcements: Refer to¢ page 164.
DAB announcements*: Refer to ¢ page 164.
Volume of announcements: You can adjust the
volume of a traffic announcement by turning the
rotary pushbutton.
Speech dialogue system
Short dialogue: This option can be switched on/
off. When it is activated, the spoken cues played
by the syste m are shortened.
Speech dialogue system volume: Turn the rotary
pushbutton to adjust the volume of the spoken
cues.
Parking aid
Turn the rotary pushbutton to adjust the volume
of the beeps.
MMI touch
Turn the rotary pushbutton to adjust the volume
of the MMI touch's spoken cues.
Audi heartbeat
Turn the rotary pushbutton to adjust the volume
of the Audi heartbeat. System
settings
Restarting the MMI
system (Reset)
Fig. 171 Combination of buttons for restart
� Briefly press the rotary pushbutton and simul­
taneously press the two rocker switches up­
wards¢ Fig. 171.
Notes on software
licences
For information on the MMI system's software
and its Licence conditions, select the
I MENU
I but­
ton > Settings > left control button > System
maintenance > Version information or go to
www.audi.com/softwareinfo.
191

Downloaded from www.Manualslib.com manuals search engine Safe
driving
Safe driving
General notes
Safety is the first priority
Your safety is our first priority.
This chapter contains important information,
tips, suggestions and warnings that you should
read and observe for your own safety and the
safety of your passengers.
_&. WARNING
- The information in this chapter is important
for the driver of the vehicle and all passen­
gers. The other chapters in this manual
(and, where applicable, in the other litera­
ture supplied with the vehicle) contain fur­
ther important notes which you should read
and observe for your own safety and that of
your passengers.
- Ensure that the complete vehicle wallet is
always in the vehicle. This is especially im­
portant when you lend or sell the vehicle to
others.
Notes on traffic safety
You should only use certain infotainment system
functions, e.g. enter a navigation destination,
while the vehicle is stationary. Always be pre­
pared to stop operating the infotainment system
in the interest of your own safety and that of oth­
er road users.
_&. WARNING
- To day's driving conditions require your full
attention. As the driver, you have full re­
sponsibility for the safety of the vehicle and
other road users. For this reason, only oper­
ate the infotainment system when the traf­
fic conditions allow you to do so safely and
when you can maintain proper control of
your vehicle - risk of accident!
- The volume of the audio sources (radio, CD
player, etc.) should only be set at a level
which enables you to hear distant police and
192 emergency
vehicles clearly-failure to do so
could result in an accident.
- Please observe the laws regulating the use
of telephones in vehicles.
Safety features
The safety features Listed here are part of the ve­
hicle's occupant restraint system. They work to­
gether to help reduce the risk of injury in a wide
variety of accident situations.
Your safety and the safety of your passengers
should not be left to chance. In the event of an
accident, the safety features incorporated in your
vehicle are capable of reducing the risk of injury.
These are just a few of the safety features in your
Audi:
- Seat belts for all seats
- Belt force limiters for all seats
- Belt tensioners for the front seats
- Front airbags
- Side airbags in the front seat backrests
- Head-protection airbags
- "ISO FIX" anchorages* for "ISO FIX" child seats
on the rear seats
-Adjustable steering column
These individual safety features are harmonised
to provide you and your passengers with the best
possible protection in accident situations. How­
ever, they can only be effective if you and your
passengers sit in the correct position and adjust
and use the safety equipment properly.
For these reasons, this chapter explains why
these safety features are so important, how they
can protect you, what you need to remember
when using them, and how you and your passen­
gers can gain the most benefit from them. There
are also a number of important safety warnings
which you and your passengers should always ob­
serve in order to minimise the risk of injury.
Safety is everyone's responsibility!