2014 AUDI TT COUPE navigation

Downloaded from www.Manualslib.com manuals search engine Navigation
Entering a stopover
Applies to vehicles: with navigation system
You can enter a new stopover while route guid­
ance is active.
Fig. 145 Entering a destination as a stopover
Important: You must have entered a main desti­
nation.
... Press the I NAV/MAP!
button repeatedly until
the Enter destination menu is displayed
¢ page 147, Fig. 141.
Entering a destination as a stopover
- Enter a destination in the entry line
¢page 148.
- Select a destination from the results list and
confirm it.
- Select and confirm Set as stopover.
Deleting a stopover
- Push the rotary pushbutton upwards. The
search function and the active route guidance
will be displayed.
- Select and confirm the stopover @¢ Fig. 145.
- Select and confirm the system request if neces-
sary. The stopover will be deleted.
Further options when entering a
destination
Applies to vehicles: with navigation system
Depending on the function chosen, the following
options may be available to you when you are en­
tering a destination:
... Press the right control button.
Stop route guidance:¢ page 152.
Show location on map: Important: You must
have selected a destination from the results list.
152 The
destination entered will be shown on the
map.
Parking at this location: Important: You must
have selected a destination from the results list.
All the parking facilities near the location selec­
ted are shown on the infotainment display.
Delete: The selected entry will be deleted. You
can delete individual entries or all the entries
(e.g. favourites or last destinations).
Audi connect for this location: Important: You
must have selected a destination from the results
list. Enables you to search for e.g. City events or
Travel information around the selected location.
Online traffic information*: The online traffic in­
formation ¢ page 161 can be switched on/off .
Store as favourite: ¢ page 153
Country selection: Select all the countries in the
list (�) which, for example, you wish to include
in your searches ¢ page 148.
Edit navigation destination: Important: You
must have selected a destination from the results
list and the Enter destination menu must be dis­
played. Select and confirm a line and change the
destination.
Information on online traffic data can be
found on the Internet at www.audi.com/con­
nect.
Stopping route guidance
Applies to vehicles: with navigation system
Important: The route guidance function must be
active.
... Push the rotary pushbutton upwards. The active
route guidance will be displayed ¢ page 152,
Fig. 145.
... Select and confirm the destination you wish to
delete. The destination will be deleted immedi­
ately. Or: Press the right control button > Stop
route guidance.

Downloaded from www.Manualslib.com manuals search engine Adding
a home address
.,. Press the I NAV/M
A
P! button repeatedly until
the Enter destination menu is displayed
¢ page 147, Fig. 141.
Storing a home address
- Select and confirm Home address
@
¢page 147, Fig. 141.
- Select and confirm Create now. Or: Select and
confirm a destination > right control button >
Store as home address.
A home address is stored in the MMI regardless
of any mobile phone which may be connected.
This home address is always available, even if no
mobile phone is connected to the MMI.
Editing home address
- Select the Home address
@¢
page 147,
Fig . 141.
- Select: right control button > Edit home ad­
dress.
- Select and confirm a new destination as the
home address.
The selected destination will be stored as the
new home address.
Adding favourites
Applies to vehicles: with navigation system
.,. Press the
I N
A
V/M A
P! button repeatedly until
the Enter destination menu is displayed
¢ page 147, Fig. 141.
Storing a destina tion as a favourite
- Search for the desired destination using the en­
try field. Or: Select and confirm a destination
from the list.
- Select: right control button > Store as favour-
ite.
Renaming a favourite
- Select: left control button > Favourites.
- Select and confirm a favourite.
� -Select: right control button > Rename favour-
� ite.
.-1
\D Lfl
N
Lfl
.-1 Navigation
Moving a favourite
- Select: left control button > Favourites .
- Select and confirm a favourite.
- Select: right control button > Move favourite.
- Move the favourite to the desired position using
the rotary pushbutton.
- Press the rotary pushbutton.
Deleting a favourite
- Select and confirm a favourite.
- Select: right control button > Delete.
Adding directory
contacts Applies to vehicles: with navigation system
Two addresses (private/business) can be stored
as a destination for each contact in the directo­
r y.
.,. Press the I N
AV/ M
A
P! button repeatedly until
the Enter destination menu is displayed
¢ page 147, Fig. 141.
Storing a destina tion as a con tact in the
directory
Important: A mobile phone must have been con­
nected to the MMI system.
- Select a destination > right control button >
Add destination to contact.
- Select and confirm Add business destination or
Add private destination.
- Enter a name. Or: Select and confirm a directo­
ry contact from the list.
- Select and confirm Store contact.
Other settings
Navigation settings
Applies to vehicles: with navigation system
.,. Press the I NA
V/
MA
P!
button repeatedly until
the Enter destination menu is displayed
¢ page 147, Fig. 141 .
.,. Select: right control button > Navigation set­
tings.
Depending on the function selected, you can use
the following settings:
.,.
153

Downloaded from www.Manualslib.com manuals search engine Navigation
Always display alternative routes
When this function is switched on, up to three
route suggestions are displayed on the map
¢page 155.
Filling station message
When the fuel gauge is in the reserve zone, a
message will appear when this function is on.
Confirm this message, and a list of nearby filling
stations will be displayed. When you select one
of the filling stations, the route to this station
will be calculated based on the current position
of your car.
Delete myAudi special destinations*
Destinations that you import from your myAudi
account to your MMI are automatically saved.
You can delete them individually or all at once.
Presentation mode
Use the Presentation mode to plan and "drive" a
journey effectively without the need to move the
vehicle. You can choose your start Location man­
ually (Select start location) if, for example, you
would like to calculate a route starting from a dif­
ferent position than the current position of the
vehicle. Start the Presentation mode to simulate
a route guidance.
Input help
When this function is switched on�, you can re­
ceive additional help when entering a destination
using the search function ¢page 148. It allows
you to have list entries transferred to the entry
line. Input help is activated when the vehicle
Leaves the factory.
Route criteria
Applies to vehicles: with navigation system
.,.. Press the I NAV/MAP!
button repeatedly until
the Enter destination menu is displayed
c> page 147, Fig. 141.
.,.. Select: right control button > Route criteria.
Traffic avoidance
- automatic: The route is automatically opti­
mised using the current traffic information. If
154 the
MMI system does not display a detour route
although the automatic traffic avoidance func­
tion is on and a traffic jam has been reported on
the planned route, this is because the estima­
ted time required for the detour is Longer than
the delay on the route with the traffic jam.
- manual: The MMI indicates that a better route
is available and informs you of the potential
time saving ¢page 160. You can then choose
which route you would like to use.
- off: The route is not updated automatically. No
optimised route is suggested.
Motorways/Vignette roads/Toll roads/Ferries/
Motorail: If you do not wish for the navigation
system to include motorways, vignette/toll
roads, ferries or car trains when calculating the
route, you can select the option avoid. You can al­
so use the Vignette roads option to set the coun­
tries for which you possess a vignette.
Time restricted
- avoid: Roads that are closed at certain times of
the day (e.g. pedestrian zones) are excluded
from the route calculation.
- automatic: The MMI system determines wheth­
er the restricted road can be included in the
route calculation based on the time tables stor­
ed in the navigation data.
- with: Roads that are closed at certain times of
the day are included in the route calculation.
Seasonally restricted
- avoid: Roads that are closed seasonally (e.g.
mountain passes) are excluded from the route
calculation.
- automatic: The MMI system determines wheth­
er the seasonally restricted road can be inclu­
ded in the route calculation based on the time
tables stored in the navigation data.
- with: Roads that are closed seasonally are in­
cluded in the route calculation.
Voice guidance
Applies to vehicles: with navigation system
.,.. Press the I NAV/MAP!
button repeatedly until
the Enter destination menu is displayed
¢page 147, Fig.141.

Downloaded from www.Manualslib.com manuals search engine 0
N
co
....
\D Lfl
N
Lfl
.... ...
Select: right control button > Voice guidance.
Voice guidance: The navigation cues can be
played in complete or compact form. You can use
the traffic option to have the system play only
those announcements on traffic obstructions
that are relevant for your route. Select off if you
do not want the system to play any navigation
cues.
Voice guidance during calls: Navigation cues dur­
ing a telephone call can be switched on/off.
Entertainment fader: Refer to¢ page 190.
Volume of spoken cues: Refer to ¢ page 190.
Avoiding specific roads
Applies to vehicles: with navigation system
Important: A destination must have been en­
tered and you must have started route guidance.
... Press
the I NAV/MAP!
button repeatedly until
the Enter destination menu is displayed
¢ page 147, Fig. 141.
... Select: right control button > Exclude route.
When route guidance is activated, a section of
the calculated route that you have set (max 20
km) will be avoided if possible. The navigation
system will calculate an alternative route.
The blocking of the route that you have entered
applies only to the current route guidance; if re­
quired, the route section to be avoided must be
re-entered.
If you exclude a route section, this section will be
hatched in red and white on the map.
Displaying alternative routes
Applies to vehicles: with navigation system
Fig. 146 Display of alternative routes Navigation
Important: A destination must have been en­
tered and you must have started route guidance.
.,. Press the I NAV/MAP!
button repeatedly until
the Enter destination menu is displayed
¢ page 147, Fig. 141.
... Select: right control button > Display alterna-
tive routes.
When this function is switched on, up to three
suggested routes and their characteristics are
displayed on the map ¢ Fig. 146.
The following information (if available) is dis­
played in the route suggestions:
- Route type (fast@, alternative fast@, eco­
nomical route@)
- Distance to destination and estimated time of
arrival
- Level of congestion on the route including
Length of delay
The route which was calculated on the basis of
your route criteria is highlighted. You may also be
shown further information on particular charac­
teristics of your route (e.g. ferry or motorail con­
nections) @¢ Fig. 146.
You can use the rotary pushbutton to preselect
the possible alternative routes and have them
displayed on the map. Select and confirm the
route which you would Like to use for route guid­
ance.
155

Downloaded from www.Manualslib.com manuals search engine Navigation
Map How to use the map
Applies to vehicles: with navigation system
Fig. 147 Map with crosshairs switched off
Galla tenzell
.. Press the I
NAV/M
API
button repeatedly until
the map is displayed c> Fig. 147.
- To switch between the map and the destina­
tion entry screen: Press the I
NAV/M
AP
! button
repeatedly until the Enter destination menu is
displayed c> page 147, Fig. 141. Or: Press the
left control button > Switch to destination en­
try.
- To switch on the crosshairs: Press the rotary
pushbutton while the map is being displayed.
- To switch off the crosshairs: Press the I BACKI
button.
Crosshairs switched on:
156 CD
Orientation: The map is displayed either in
the 2D north perspective or the 2D driving
position perspective.
@ Scale: Turn the rotary pushbutton clockwise/
anti-clockwise to zoom in or out.
@ When the Automatic zoom function is
switched on, an "A" for "automatic" is shown
in the zoom symbol.
@ The crosshairs: Move the crosshairs in the de­
sired direction using the MMI touch pad and
select an item on the map as the destination.
Alternatively, have information displayed on
the map item.
..,.

Downloaded from www.Manualslib.com manuals search engine 0
N
co
....
\D L/'l
N
L/'l
.... ®
Map content (special destinations, favour­
ites). If several special destinations are loca­
ted close to each other, their symbols are
stacked on the map.
® Additional information on the position of the
crosshairs: If you move the crosshairs onto a
point on the map, any existing information
on the current position of the crosshairs will
be displayed. Press the rotary pushbutton to
call up the destination details or start route
guidance. If the crosshairs are switched off,
the street you are currently on will be dis­
played.
0 Display of an upcoming turn-off. If no ma­
noeuvre is coming up, the remaining distance
to the destination/stopover is shown at this
position along with the estimated arrival
time.
@ If a directional arrow is displayed, a bar
graph will also appear. The fewer bars are
displayed, the shorter the distance to the
turn-off point.
Crosshairs switched off:
® Speed display !
): Display of the maximum
speed limit on motorways, dual carriageways
and other major roads.
@ Street the vehicle is currently on. When the
vehicle is stationary , "offroad" is displayed
here.
@ Location of the vehicle
@ Traffic information display (online orTMC/
TM Cpro)
@ Altitude display
@ Route information: Various information is
displayed during route guidance (e.g. the up­
coming manoeuvre including the calculated
distance and road name). Traffic information
or special destinations on your current route
are also displayed.
(D Note
Whether the level of congestion is taken into
account when the route is being calculated
ll Applies to vehicles without camera-based speed limit dis­
play only Navigation
depends on your traffic avoidance settings
¢page 154.
Map functions
� Press the I NA
V/MAP!
button repeatedly until
the map is displayed ¢ page 156, Fig. 147.
� Select: left control button > desired function.
Switch to destination entry
The search function in the Navigation menu is
displayed ¢page 147, Fig. 141.
Traffic announcements
Up-to-date traffic information is shown on the in­
fotainment display. Further information can be
found from ¢ page 160 onwards.
Route list
The route list can only be displayed when the
route guidance function is active; it contains in­
formation on the route, road names and the
length of the route sections. On motorways, po­
tential parking areas and service stations will be
displayed. You can select them as e.g. a stopover.
Special destinations along the route
Important: The route guidance function must be
active.
You can search for special destinations along
your current route. For more information, please
refer to ¢page 150.
Further map options
A pplies to vehicles: with navigation system
� Press the I NA
V
/MAP!
button repeatedly until
the map is displayed ¢ page 156, Fig. 147.
� Press the right control button.
Depending on the function chosen, the following
additional options may be available in the Map
menu:
Stop route guidance: Refer to¢ page 152
Map settings: Refer to¢ page 158
157

Downloaded from www.Manualslib.com manuals search engine Navigation
Route criteria: Refer to¢ page 154
Voice guidance: Refer to¢ page 154
Navigation settings: Refer to¢ page 153
Online traffic data*: Refer to ¢ page 161.
Exclude route: Refer to¢ page 155
Display alternative routes: Refer to¢ page 155
Parking in vicinity of route: Parking facilities
near the vehicle are displayed.
Store current position: You can store your vehi­
cle's current position as a favourite ¢page 153
or as a contact in the directory ¢page 153.
Audi connect for this location*: Enables you to
search for e.g. City events or Travel information
in the Location entered (events, weather at desti­
nation etc.).
Country information: With this option, you can
view the speed limits for towns and country
roads in the country you have selected. This infor­
mation is displayed automatically when you cross
a border in the route information �¢ page 156,
Fig. 148 if this is activated ¢page 158.
Map settings
Applies to vehicles: with navigation system
.,. Press the
I NAV/MAP!
button repeatedly until
the map is displayed.
.,. Select: right control button > Map settings.
Depending on the function selected, you can use
the following settings:
Map colours
day/night: The map is displayed with a light/dark
background colour.
automatic: When the lights are on, the map
scheme will switch from day to night.
Map display
Standard ¢ page 156, Fig. 148.
Google Earth ¢page 159, Fig. 149.
Traffic ¢page 161, Fig. 151.
158 Map
orientation
destination: The map indicates the destination
and is set to face north.
2D driving position/2D north: The map depicts
the vehicle's current position. The map is set to
face the direction of travel or north.
3D map: When this function is activated, the cur­
rent vehicle position is displayed in a three-di­
mensional map, and the map is set to face the di­
rection of travel. If the map scale is more than
100 km, the map is set to face north.
overview: The entire route from the vehicle posi­
tion to the final destination or next stopover is
displayed on the map. The map scale varies ac­
cording to the length of the route and is adapted
automatically. The map is set to face north.
Route information
The display of route information such as the
street you are currently on, upcoming turn-offs,
traffic information or special destinations on the
current route can be switched on/off.
Automatic zoom
on: The map scale is adjusted automatically ac­
cording to the category of the road you are on
(motorway , major road, other road) to ensure
that you always have the best possible overview
of the route ahead. When there is an upcoming
turn-off, the map display will also be automati­
cally adjusted so that you have a more detailed
view.
intersection: When route guidance is active and
there are upcoming turn-offs, the map display
will temporarily switch to a more detailed scale
so that the road layout can be identified more
easily.
off: The map scale you have set will remain unal­
tered.
Map content
The display of map content such as traffic infor­
mation, favourite destinations, restaurants, and
content from Google can be switched on� and
off.

Downloaded from www.Manualslib.com manuals search engine 0
N
co
....
\D L/'l
N
L/'l
.... Google
Earth map
display
Applies to vehicles: with navigation system and Audi connect
You can have the map display satellite images
using the Google Earth map display.
Fig. 149 Google Earth map display
Fig. 150 Google Earth map display with Google Street
View
Important: The requirements for Audi connect
must be met ¢page 137.
... Press
the I NAV/MAP!
button repeatedly until
the map is displayed.
... Select: right control button > Map settings>
Map display> Google Earth.
For this map display the system uses data pack­
ets received on line in the form of satellite pic­
tures and combines these pictures with the road
network from the Standard map display. The
MMI has a memory capacity of 2 GB for tempora­
rily storing the map/navigation data received on­
line (corresponds to map/navigation data for
about 4000 km of route guidance). You can also
use the loaded satellite pictures for route guid­
ance without an active data connection as long as
these pictures are stored.
Google Street View
With Google Street View, you can explore many
locations all over the world virtually from the
perspective of a pedestrian. Google Street View is Navigation
available as soon as the symbol (D ¢ Fig. 149 is
shown in crosshairs mode.
To start Google Street View: Turn the rotary
pushbutton to select a scale below 30 m.
The following options are available:
- To explore a destination step-by-step: Press
the rotary pushbutton when the symbol @is
visible.
- To zoom in/out of the current display {up to
4x): Turn rotary pushbutton to the left/right
® ·
- To navigate in the street view: Move your fin-
ger in the desired direction on the MMI touch
pad.
Additional information
In the Map content menu¢ page 158, you can
activate the function to show additional informa­
tion on the infotainment display such as Panora­
mic photos of landmarks/special destinations. To
show the additional information move the cross­
hairs onto an item on the map and press the rota­
ry pushbutton. You can now look at pictures of
landmarks or special destinations, for example,
and have information about them displayed.
@ Note
- You can delete the data stored by the Goo­
gle Earth map display using the Factory set­
tings > Navigation and online memory
¢page 187.
- Google Earth is an Audi connect service that
is updated at regular intervals when it is
called up. This can take a few seconds.
- When the Google Earth map display is
switched on and the position 3D map type is
selected, the map display automatically
switches to the position 2D map while you
are driving through a tunnel.
- For safety reasons, the Google Street View
functions cannot be used while the vehicle
is moving.
- Please observe the notes in the chapter
Notes on Audi connect ¢page 145.
- Further information can be found on the In­
ternet at www.audi.com/connect.
159