2014 AUDI S8 buttons

Homelink
Universal remote
control
General information
Applies to vehicles: with Home link unive rsal remote con­
tro l
The Homelink universal remote control can
be programmed with hand -held transmitters
from existing equipment
Using the Homelink universal remote control,
you can operate equ ipment such as garage
doors, property gates and house lights from inside your vehicle .
Using the Homelink universal remote control,
you can replace up to three separate hand ­
held transmitters for equipment on your
property with just one universal remote con­
trol. Most of these transmitters a re used to
operate ga rage doors and property gates. The
individual transmitters are programmed at
the front bumper. That is where the control
module is located.
The transmitters must be programmed first in
order to operate systems using the Homelink
universal remote control.
A WARNING , .,.
- Never use the Homelink transmitter
with any garage door opener that does
have not the safety stop and reverse fea­
ture as required by federal safety stand­
ards . Th is includes any garage door open ­
er model manufactured before April 1,
1982.
- A garage door opener which cannot de­
tect an object, signaling the door to stop
and reverse does not meet current feder­
al safety standards . Us ing a garage door
opener without these features increases
risk of serious injury or death.
- For safety reasons never release the
parking brake or start the engine while
anyone is standing in front of the vehicle .
- A garage door or an estate gate may sometimes be set in motion when the
H ome link 133
Homelink remote control is being pro­
grammed. If the device is repeatedly ac­
tivated, this can overstrain motor and
damage its electrical components -an
overheated motor is a fire hazard!
- To avoid possible injuries or property
damage, please always make absolutely
certa in that no persons or objects are lo­
cated in the range of motion of any
equipment being ope rated.
(D Tips
- If you would like additional information
on the Home link Universal Transce iver
'
Homel ink compatib le products, or to
purchase other accessories such as the
Homelink Lighting Package, please con­
tact Homelink at 1-800-355 -3515 or on
the Internet at www. homelink.com.
- For Declaration of Comp liance to United
States FCC and Ind ustry Canada reg ula­
tions~
page 295.
Operation
Applies to vehicles: with Homeli nk
Fig. 151 Contro l u ni t in the head liner
"' 8 ±
" m
Requ irement: The buttons must be p rogram­
med
~ page 134.
"Press the programmed button~ & in Gen­
eral information on page 133
to open the
garage door. The light @will bl ink or turn
on .
" Press the button again to close the garage
door
¢ .&. in General information on
pag e 133 . .,.

134 Homelink
@ Tips
To open t he ga rage door, p ress the butto n,
but do not press it for longer ten seco nds
or the Homelink modu le w ill switch to
programming mode.
Programming transmitters
App lies to vehicles: with Home link
F ig. 152 L eft front area of the bu mpe r
You can prog ram both fixed co de a nd rolling
code systems usi ng these instructions .
Programming a button
> Make sure your ve hicle is wi thin opera ting
r a nge o f th e remo te con trolle d garage door
opener .
> Set the parki ng brake¢ .&. in General infor­
mation on page 133.
> Switch the ignition on. Do not s tart the en­
gine!
> There are two ways to program a button: press the button that yo u wou ld like to pro­
gram . The M MI w ill display i nstruct ions to
guide yo u thr oug h the programm ing. Or
> S e le ct: I CAR I function button> Car system s
control butt on > Vehicle settings > Garage
door opener
> Program garage door open­
er .
.. Se lect the b utton t hat you wo uld like to pro­
gram.
.. Fo llow the instructions in the MMI.
• If the garage door open ing must a lso be
synchronized wit h the Homelink mod ule,
refer to t he ow ner's manual fo r the ga rage
doo r ope ner.
Erasing the button programming
> Sele ct: I CAR I function butto n > Car sy stems
fu nction key > Vehicle setting s> Garage
door opener
> Clear program settings >
Yes .
Displaying the version/status/country
code
.. Select: I CAR I function button > Car systems
cont ro l button > Vehicle settings > Garage
door opener > Version information .
Programming a button
T he re quired di sta nce between the hand he ld
t ransmit ter and the Homel ink modu le in t he
bumpe r depe nds on the system that you are
programming . When programm ing a new de­
vice, keep the b utton pressed for at least 15
seconds before trying aga in with the transm it­
te r in a diffe rent position .
Each of the b uttons can be reprogrammed in­
dividua lly . The p rocedure is the same as for in­
it ial programm ing .
c> page 134 , Programming
a button .
Erasing the button programming
Individual b uttons ca n be re programmed . Fol­
l ow the same steps used when first program­
ming the button.
If you wo uld like to erase all prog rammed but ­
tons at the same time, select Erase butto n
programming.
(D Tips
- To ens ure yo ur safe ty, e ras ing t he pr o­
gramme d Home link buttons before sell­
ing the vehicle is rec ommende d.
- Depending on the model of t he gara ge
door o pener, you may need to release t he
button on the rem ote and press it again
w hen programming .

@ Tips
-In Canada, the terms "top tether" with
"lower universa l anchorages" (or "lower
universal anchorage bars") are used to
describe the system.
- In other countries, the term "ISO FIX" is used to describe the lower anchorages.
Location
Fig . 180 Sch ematic overv ie w: LA T CH an cho rag e point
l ocation s
The illustration shows the seating locations in
your veh icle which are equipped w ith the low­
e r ancho rages system .
Description
The lower anchorage positions are marked
for quick locating .
Fig. 181 Re ar sea tbacks: lo ca tor b utto ns fo r low er a n·
cho rages
Child S afety 191
Fig. 1 82 Rea r seats: lowe r ancho rage bra cket locat ions
Attachm ent l ocato r markers for lowe r
anchorages
Circular locator buttons on the rear seatback
indicate the lowe r anchorage locations o n the
rear seating posi tions
c::> fig. 181 .
Lo wer anchorages
The lower anc horage attachment points are
located between the rear seatback and rear
seat cushion
c::> fig . 182.
Lower anchorages secure the child restrain t in
the seat without us ing the vehicle 's safety
belts . Anchorages provide a secure and easy­
to-use attachment and minimize the possibi li­
ty of improper ch ild restra int installat ion.
All child restraints manufactured after Sep ­
tember 1, 2002, must have lower anchorage
attachments for the
LATCH system.
Remember that the lower anchorage poin ts
are o nly intended for installation and attach ­
ment of child restraints specifically cer tified
for use with
LATCH lower anchorages . Chi ld
r est rain ts that are not equ ipped with the low­
er anchorage attachme nts can still be i nsta l­
led in compliance with the child rest raint
manufacturer's instructions on using vehicle
safety belts .
_& WARNING
Improper use of LATCH lower anchorages
can cause serious persona l injury in an ac­
cident.
- Always carefully follow the child re­
straints manufacture r's instructions for
proper insta llation of the child restraint