50 Power top
Perform the following steps in the rear win
dow area of the power top on each side .
.,. Pull the loops (marked in yellow) w ith the
eme rgency key to loosen the headliner .
.,. Pull at the yellow marking again to loosen
the headliner around the rear window (ap
proximate ly 30 cm).
Step 9: Securing the latch
Fi g. 53 Rear of the power top: Securing the latc h
The latches must be secured on the left and
right sides of the vehicle .
.,. Pull the power top headliner to the side in
the area around the rea r headrests to sec ure
the latches~
fig. 53 ~.&. in Step 2: Li~ing
the power top compartment cover out on
page 47 .
.,. Then remove the emergency key and insert
the short end into the power top support at
the yellow marking .
.,. Press the emergency key in the direction of
the arrow @ unt il the latch is secure .
A WARNING
Do not pinch yourself or others when clos
ing the power top compar tment.
130 Driving Safely
Tel.: 1-800-333-0510 or
Tel.: 1-819-994-3328 (Ottawa region and from other coun
tries)
TTY for hearing impaired: Tel.:
1-888-675-6863
or contact Transport Canada by
mail at:
Transport Canada Motor Vehicle Safety Investiga
tions Laboratory 80 Noel Street
Gatineau, QC
J8Z 0Al
For additional road safety infor
mation, please visit the Road
Safety website at:
http:/ /www.tc .gc.ca/eng/
roadsafety/menu. htm
Active rollover
protection system
Function
The rollover protection system helps protect
vehicle occupants in the event of a rollover.
l '1
I j 1 !
I i I
Fig. 135 Rear seats: Rollbar deplo yment ra nge
Fig. 136 Rear seats: rollbar deploye d
; 0 ii. II) ID
The active rollover protection system consists
of:
- two rollbars
- the safety belts with belt tensioners
- the windshield frame
- the rollover sensors
The act ive rollover protection system provides
additional safety in the event of a rollover.
Within milliseconds, sensors deploy two roll
bars located behind the headrests in the rear
seats r:!)fig.
136.
The rollbars, reinforced windshield frame and
belt tensioners help protect front and rear
passengers in the
event of a rollover.
The rollover protection system functions
when the power top is both open and closed.
A WARNING
Do not use the area behind the rear seat
headrests
I:!) fig. 135 as a storage area.
This is the area where the rollbars deploy.
If the rollover protection system is trig
gered, objects placed there can be propel
led through the vehicle and make it more
difficult for the rollbars to deploy. This in
creases the risk for serious or life-threat
ening injuries.
When is rollover protection deployed?
Rollover protection deploys in a collision or
rollover.
-
Depending on the collision, sensors through
out the vehicle and the control module trigger
t he rollover system to deploy.
ll>-
