85
Bipper_en_Chap05_technologie_ed02-2014
Menu...Press...Sub-
menu...Press... Select... Confirm
and exitEnables you to...
1 Speed beep ON
Increase
Activate/Deactivate the audible
signal indicating exceeding of the
programmed speed.
Modify the speed setting.
Decrease
OFF
2
Activate
trip
B ON
Activate
Display a second trip,
"
t
rip B".
OFF Deactivate
3
Set
time Hours
Increase
Adjust the clock
Decrease
Format 24 h
Select the display mode for the
clock.
12 h
4 Set date Year /
Month / DayIncrease
Adjust the date.
Decrease
This button enables
you to:
-
access the menus and
sub-menus, This button enables you to:
-
scroll up through a menu,
-
increase a value.
This button enables you to: -
scroll down through a menu,
-
decrease a value.
-
confirm your selections within a menu,
-
exit from the menus.
A
long press enables you to return to the
home screen.
5
TECHNOLOGY on BOARD
Vehicle configuration
159
Bipper_en_Chap09_aide-rapide_ed02-2014
- If a pressure of at least 1.5 bars is not
reached within 5 minutes:
●
disconnect the compressor from the
valve and from the 12 V accessory
socket,
●
move the vehicl
e forward by
approximately 10 metres to distribute the
filling fluid inside the tyre,
●
then repeat the inflation operation
.
-
If a pressure of at least
1.8 bars is not
reached within 10 minutes:
●
stop the repair p
rocedure; the tyre has
suffered too much damage and cannot
be repaired,
●
contact a PEUGEOT
dealer or a qualified
workshop.
-
If the tyre has been inflated to a pressure
of 3 bars, set off again immediately.
After driving for approximately 10 minutes,
stop and check the pressure of the tyre
again.
Adjust the tyre pressure if necessary and
contact a P
euge O t
dealer or a qualified
workshop as soon as possible.
You must inform the technician that you
have repaired the tyre using the temporary
puncture repair kit and show him its
instructions.
Checking and correcting the pressure
For checking and correcting the pressure of
a tyre, use the compressor as follows:
-
disconnect the pipe
I,
-
connect it directly to the tyre valve,
t
he cartridge will then be connected to
the compressor and the sealant will not be
injected.
Replacing the repair cartridge
Disconnect the pipe I .
turn the empty cartridge anticlockwise and
lift it.
Insert the new cartridge and turn it
clockwise.
Reconnect the pipe I and connect the pipe B
to its location.
t
he repair cartridge contains ethylene-
glycol, a product which is harmful if
swallowed and which causes irritation to the
eyes.
Keep this product out of reach of children.
After use, take the cartridge to a P
euge O t
dealer or to an authorised waste disposal
site.
If the tyre has to be deflated:
-
connect the pipe
I to the tyre valve,
-
press the yellow button, located in the
centre of the switch F on the compressor.
9
QUICK HELP
Changing a wheel
