2014.5 Citroen NEMO RHD bulb

[x] Cancel search: bulb

Page 13 of 192

Citroen NEMO RHD 2014.5 1.G Owners Manual  11INTERIOR (COMBI)
Rear view mirror ..............................51
Front courtesy lamp   .........................82
Changing a courtesy   
lamp bulb
 

.................................... 163
Fro

Page 18 of 192

Citroen NEMO RHD 2014.5 1.G Owners Manual  16
Emission controls ....................34, 151
Bulbs, lighting, changing 
 
bulbs
 .......

.............................
161-165
Opening the bonnet
 ....................... 144
Under the bonnet

Page 141 of 192

Citroen NEMO RHD 2014.5 1.G Owners Manual  139
ROOF RACK AND ROOF BARS
To install the transverse roof bars or a 
roof rack, use the fixings provided for this 
purpose.
Maximum load: 75 kg
OTHER ACCESSORIES
A wide range of accessories and genu

Page 163 of 192

Citroen NEMO RHD 2014.5 1.G Owners Manual  161
Front lamps
open the bonnet. To access the bulbs, reach 
behind the headlamp unit.
Remove the protective covers to gain
 
access to the bulbs.
Carry out the operations in reverse order to 
refit

Page 164 of 192

Citroen NEMO RHD 2014.5 1.G Owners Manual  162
1 - Dipped beam headlamps
Type D, H4 - 55 W
- 
Remove the cover by turning it
  
anticlockwise.
-
 
Disconnect the electrical connector
 .
-
 
Release the retaining spring by pressing
  
on the t

Page 165 of 192

Citroen NEMO RHD 2014.5 1.G Owners Manual  163
Front / rear courtesy lamps
Type C, 12 V 10 W - 10 W
- 
Release the courtesy lamp using a
  
screwdriver.
-
 
Remove the cover to gain access to the
  
bulb.
-
 
Change the bulb moving aside the

Page 166 of 192

Citroen NEMO RHD 2014.5 1.G Owners Manual  164
Rear lamps
- Identify the faulty bulb then open the rear 
doors.
-
 
Unscrew the two screws using the
  
screwdriver supplied in the tool kit 
(behind the drivers seat) and extract the 
bulb hol

Page 167 of 192

Citroen NEMO RHD 2014.5 1.G Owners Manual  165
Third brake lamp
On the hinged rear doors
Type B, W 5 W - 5 W (4 bulbs)
- 
Unclip the transparent cover using the
  
screwdriver located in the tool kit.
-
 
Disconnect the electrical connector
Page:   < prev 1-8 9-16