2014.5 Citroen C4 PICASSO RHD tow

223
2nd row seat belts
Fastening
F Pull  the   strap,   then   insert   the   tongue   in   the  buc
kle.
F
 
C
heck   that   the   seat   belt   is   fastened  
c

orrectly   by   pulling   the   strap.
Unfastening
F Press  the   red   button   on   the   buckle.
F  G uide   the   seat   belt   as   it   reels   in.The
  rear   seats   are   each   fitted   with   a   seat   belt,  
t

hree-point   anchorages   with   inertia   reel   and  
f

orce   limiter   (except   for   the   centre   rear   seat).
Guide   the   belt   as   it   reels   in   and   place   the  
t

ongue   on   the   magnet   at   the   side   anchorage  
po

int.
2nd row outer seat belts
(stowing)
6
Safety

224
2nd row centre seat belt
The seat belt for the centre rear seat is built into the roof.
Fastening
F Pull  the   strap   and   insert   the   tongue   A into
the   right   hand   buckle.
F
 
I
nsert   tongue   B   into   the   left   hand   buckle.
F
 
C
heck   that   each   buckle   is   correctly  
f

astened   by   pulling   on   the   belt   webbing.
Unfastening
F Press  the   red   button   in   buckle   B, then
buckle A .
F
 
G
uide   the   seat   belt   as   it   reels   in   and   place  
t

he   tongue   B   and   then   A   on   the   magnet   in  
t

he   roof   anchorage   point.
be

fore any operation of the rear seats,
to
  avoid   damage   to   the   seat   belts  
c

heck   that   there   is   no   slack   in   the   outer  
b

elts   and   secure   their   tongues   on   the  
a

nchorage   points.   The   centre   seat   belt  
m

ust   be   fully   reeled   in.
3rd row seat belts
Fastening
F Detach  the   seat   belt   strap   from   its   retaining  l
oop   located   on   the   side   trim   of   the   boot.
F
 
P
ull   on   the   strap   and   insert   the   tongue   into  
t

he   buckle.
F
 
C
heck   that   the   buckle   is   correctly   fastened  
b

y   pulling   on   the   belt   strap.
Unfastening and stowing
F Press  the   red   button   in   buckle.
F  G uide   the   seat   belt   strap   as   it   reels   in.
F
 
S
ecure   the   strap,   flat   in   the   retaining   loop.
Ensure that the the seat belts are
secured
  when   not   in   use.
Safety

226
The driver must ensure that passengers use the   seat   belts   correctly   and   that   they   are   all  
r

estrained   securely   before   setting   off.
Wherever
  you   are   seated   in   the   vehicle,  
a

lways fasten your seat belt, even for short
journeys.
Do
  not   interchange   the   seat   belt   buckles   as  
t

hey   will   not   fulfil   their   role   fully.
The
  seat   belts   are   fitted   with   an   inertia   reel  
p

ermitting   automatic   adjustment   of   the  
l

ength   of   the   strap   to   your   size.   The   seat   belt  
i

s   stowed   automatically   when   not   in   use.
Before
  and   after   use,   ensure   that   the   seat  
b

elt   is   reeled   in   correctly.
The
  lower   part   of   the   strap   must   be  
p

ositioned   as   low   as   possible   on   the   pelvis.
The
  upper   part   must   be   positioned   in   the  
h

ollow   of   the   shoulder.
The
  inertia   reels   are   fitted   with   an   automatic  
l

ocking   device   which   comes   into   operation   in  
t

he   event   of   a   collision,   emergency   braking  
o

r   if   the   vehicle   rolls   over.   You   can   release  
t

he   device   by   pulling   the   strap   firmly   and  
t

hen   releasing   it   so   that   it   reels   in   slightly.Recommendations for children
Use a suitable child seat if the passenger is less   than   12   years   old   or   shorter   than   one  
a

nd   a   half   metres.
Never
  use   the   same   seat   belt   to   secure   more  
t

han   one   person.
Never
  allow   a   child   to   travel   on   your   lap.
For
  more   information,   refer   to   the   "Child  
sea

ts"
 se
ction.
In
 
order
 
to
 
be
 
effective,
 
a
 
seat
 
belt
 
must:
-
 b
e
 
tightened
 
as
 
close
 
to
 
the
 
body
 
as
 p
ossible,
-
 
b

e
 
pulled
 
in
 
front
 
of
 
you
 
with
 
a
 
smooth
 
m

ovement,
 
checking
 
that
 
it
 
does
 
not
 
t

wist,
-
 
b

e
 
used
 
to
 
restrain
 
only
 
one
 
person,
-
 
n

ot
 
bear
 
any
 
trace
 
of
 
cuts
 
or
 
fraying,
-
 
n

ot
 
be
 
converted
 
or
 
modified
 
to
 
avoid
 
a

ffecting
 it

s
 p

erformance.
In the event of an impact
Depending on the nature and
seriousness of the impact , the
pretensioning
  device   may   be   deployed  
b

efore   and   independently   of   the   airbags.  
D

eployment   of   the   pretensioners   is  
a

ccompanied   by   a   slight   discharge   of  
h

armless   smoke   and   a   noise,   due   to   the  
a

ctivation   of   the   pyrotechnic   cartridge  
i

ncorporated   in   the   system.
In
  all   cases,   the   airbag   warning   lamp   comes  
o

n.
Following
  an   impact,   have   the   seat   belts  
s

ystem   checked,   and   if   necessary   replaced,  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
In
 
accordance
 
with
 
current
 
safety
 
r

egulations,
 
for
 
all
 
repairs
 
on
 
your
 
vehicle's
 s
eat
 
belts,
 
go
 
to
 
a
 
qualified
 
workshop
 
with
 t
he
 
skills
 
and
 
equipment
 
needed,
 
which
 
a
 
C

ITROËN
 
dealer
 
is
 
able
 
to
 
provide.
Have
 
your
 
seat
 
belts
 
checked
 
regularly
 
by
 
a

 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop,
 
p

articularly
 
if
 
the
 
straps
 
show
 
signs
 
of
 
d

amage.
Clean the seat belt straps with soapy
water
 
or
 
a
 
textile
 
cleaning
 
product,
 
sold
 
by
 
C

ITROËN
 
dealers.
After
 
folding
 
or
 
moving
 
a
 
seat
 
or
 
rear
 
bench
 
s

eat,
 
ensure
 
that
 
the
 
seat
 
belt
 
is
 
positioned
 
a

nd
 
reeled
 
in
 
correctly.
Safety

227
Airbags
System designed to contribute towards improving   the   safety   of   the   occupants   (with  
t

he   exception   of   the   rear   centre   passenger)  
i

n   the   event   of   violent   collisions.   The   airbags  
s

upplement   the   action   of   the   force-limiting  
s

eat   belts   (with   the   exception   of   the   centre   rear  
p

assenger).
If
  a   collision   occurs,   the   electronic   detectors  
r

ecord   and   analyse   the   front   and   side   impacts  
s

ustained   in   the   impact   detection   zones:
-
 
i
n   the   case   of   a   serious   impact,   the   airbags  
a

re   deployed   instantly   and   contribute  
t

owards   better   protection   of   the   occupants  
o

f   the   vehicle   (with   the   exception   of   the  
r

ear   centre   passenger);   immediately   after  
t

he   impact,   the   airbags   deflate   rapidly   so  
t

hat   they   do   not   hinder   visibility   or   the   exit  
o

f the occupants,
-
 
i
n   the   case   of   a   minor   or   rear   impact   or   in  
c

ertain   roll-over   conditions,   the   airbags  
m

ay   not   be   deployed;   the   seat   belt  
a

lone   contributes   towards   ensuring   your  
p

rotection   in   these   situations.
The airbags do not operate when the
ignition is switched off.
This
  equipment   will   only   deploy   once.  
I

f   a   second   impact   occurs   (during   the  
s

ame   or   a   subsequent   accident),   the  
a

irbag   will   not   be   deployed   again. Deployment
  of   one   or   more   of   the  
a

irbags   is   accompanied   by   a   slight  
e

mission   of   smoke   and   a   noise,   due  
t

o the activation of the pyrotechnic
cartridge
  incorporated   in   the   system.
This
  smoke   is   not   harmful,   but   sensitive  
i

ndividuals   may   experience   slight  
ir

ritation.
The
  noise   of   detonation   related   to   the  
d

eployment   of   one   or   more   airbags   may  
r

esult   in   a   slight   loss   of   hearing   for   a  
s

hort   time.
Impact detection zones
A. Front  impact   zone.
B. S ide   impact   zone.
6
Safety

231
In the event of a minor impact or bump on   the   side   of   the   vehicle   or   if   the  
v

ehicle   rolls   over,   the   airbags   may   not  
b

e   deployed.
In the event of a rear or front collision,
none
  of   the   lateral   airbags   is   deployed.
System
 
contributing
 
towards
 
greater
 
protection
 
f

or
 
the
 
the
 
driver
 
and
 
passengers
 
(with
 
the
 
e

xception
 
of
 
the
 
rear
 
centre
 
passenger)
 
in
 
the
 
e

vent
 
of
 
a
 
serious
 
side
 
impact
 
in
 
order
 
to
 
limit
 
t

he
 
risk
 
of
 
injury
 
to
 
the
 
side
 
of
 
the
 
head.
Each
 
curtain
 
airbag
 
is
 
built
 
into
 
the
 
pillars
 
and
 
t

he
 
upper
 
passenger
 
compartment
 
area.
Curtain airbags
Deployment
The curtain airbag is deployed at the same t
ime   as   the   corresponding   lateral   airbag   in   the  
e

vent   of   a   serious   side   impact   applied   to   all   or  
p

art   of   the   side   impact   zone   B,   perpendicular  
t

o   the   longitudinal   centreline   of   the   vehicle   on   a  
h

orizontal   plane   and   directed   from   the   outside  
t

owards   the   inside   of   the   vehicle.
The
  curtain   airbag   inflates   between   the   front   or  
r

ear   occupant   of   the   vehicle   and   the   windows.If
  this   warning   lamp   comes   on   in   the i

nstrument   panel,   accompanied   by   an
 a

udible   signal   and   a   message,   contact
 a

  CITROËN   dealer   or   a   qualified
 w

orkshop   to   have   the   system   checked.
 T

he   airbags   may   no   longer   be   deployed
 i

n   the   event   of   a   serious   impact.
Operating fault
6
Safety

241
(a )   Universal   child   seat:   child   seat   which   can   be  i
nstalled   in   all   vehicles   using   the   seat   belt.
( b )
  
G
roup   0:   from   birth   to   10   kg.   Infant   car   seats  
a

nd   "car   cots"   cannot   be   installed   on   the  
f

ront   passenger   seat.   When   installed   in   the  
2nd row, they may prevent use of the other seats.
( c )
  
C

onsult   the   legislation   in   force   in   your  
c

ountry   before   installing   your   child   on  
this
 sea

t.
( d )
  
T

o
  install   a   child   seat   on   a   rear   seat,  
r

ear ward   facing   or   for ward   facing,   move  
t

he   front   seat   for ward,   then   straighten   the  
b

ackrest   to   allow   enough   space   for   the   child  
s

eat   and   the   child's   legs.
( e )
  
T

o
  install   a   child   seat   on   a   rear   seat,  
r

ear ward   facing   or   for ward   facing,   adjust   the  
r

ear   seat   to   the   fully   back   position,   with   the  
b

ackrest   upright. Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
U
:   
s
eat   suitable   for   the   installation   of   a   child  
s

eat   secured   using   the   seat   belt   and  
u

niversally   approved   rear ward   facing   and/
or   for ward   facing,   with   the   passenger   seat  
a

djusted   to   the   midway   longitudinal   position.
U(R) :   s ame   as   U
,   with   the   passenger's   seat  a
djusted   to   the   low   position   with  
11
  actions   on   the   height   control   lever   and  
i

n   the   midway   longitudinal   position.
6
Safety

243
(a )   Universal   child   seat:   child   seat   which   can   be  i
nstalled   in   all   vehicles   using   the   seat   belt.
( b )
  
G
roup   0:   from   birth   to   10   kg.   Infant   car   seats  
a

nd   "car   cots"   cannot   be   installed   on   the  
f

ront   passenger   seat   or   in   the   3
rd row. When i
nstalled
 
in
 
the
 
2nd row, they may prevent u
se
 
of
 
the
 
other
 
seats.
( c )
  
C

onsult
 
the
 
legislation   in   force   in   your  
c

ountry
 
before
 
installing   your   child   on  
this
 sea

t.
( d )
  
T

o
 
install
 
a
 
child
 
seat   on   a   rear   seat,  
r

ear ward
 
facing
 
or   for ward   facing,   move  
t

he
 
front
 
seat
 
for ward,   then   straighten   the  
b

ackrest
 
to
 
allow
 
enough   space   for   the   child  
s

eat
 
and
 
the
 
child's   legs.
( e )
  
T

o
 
install
 
a
 
child
 
seat   on   a   rear   seat,  
r

ear ward
 
facing
 
or   for ward   facing,   adjust   the  
r

ear
 
seat
 
to
 
the
 
fully   back   position,   with   the  
b

ackrest
 
upright. Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
U
:   
s
eat   suitable   for   the   installation   of   a   child  
s

eat   secured   using   the   seat   belt   and  
u

niversally   approved   rear ward   facing   and/
or   for ward   facing,   with   the   passenger   seat  
a

djusted   to   the   midway   longitudinal   position.
U(R) :   s ame   as   U
,   with   the   passenger's   seat  a
djusted   to   the   low   position   with  
11
  actions   on   the   height   control   lever   and  
i

n   the   midway   longitudinal   position.
6
Safety

244
"ISOFIX" mountings
Your vehicle has been approved in accordance with the latest ISoFI X regulations .
The   seats,   represented   below,   are   fitted   with   regulation   ISOFIX   mountings:
-
 
t
wo   rings   A,
  located   between   the   vehicle  
s

eat   back   and   cushion,   indicated   by   a  
m

arking, -
 a

  ring   B,
  located   under   a   cover   on   the   back
 o

f   the   top   of   the   seat   backrest,   referred   to   as
 t

he TOP TETHER
  for   fixing   the   upper   strap.
 I

ts   position   is   indicated   by   a   marking.
Located
  on   the   back   of   the   seat   backrest,   the  
t

op   tether   is   used   to   secure   the   upper   strap   of  
c

hild   seats   that   have   one.   This   device   limits  
f

or ward   tipping   of   the   child   seat,   in   the   event   of  
a

  front   impact.The
  incorrect   installation   of   a   child   seat  
i

n   a   vehicle   compromises   the   child's  
p

rotection   in   the   event   of   an   accident.
Observe
  strictly   the   fitting   instructions  
p

rovided   with   the   child   seat.
For
  information   on   the   possibilities  
f

or   fitting   ISOFIX   child   seats   to   your  
v

ehicle,   refer   to   the   table   of   seating  
p

ositions.
The ISOFIX mountings are three rings for each seat:
This ISOFIX mounting system ensures fast, reliable   and   safe   fitting   of   the   child   seat   in   your  
v

ehicle.
The ISOFIX child seats
  are   fitted   with   two  
l

atches   which   are   secured   easily   on   the   two  
r

ings
 A .
S

ome   also   have   an   upper strap (or top tether)
which
  is   attached   to   ring   B. To
  secure   the   child   seat   to   the   TOP TETHER
:
-  
r
emove   and   stow   the   head   restraint   before  
i

nstalling   the   child   seat   on   this   seat   (refit   it  
a

fter   the   child   seat   has   been   removed),
-  
r
emove   the   TOP TETHER   cover   by   pulling  
a

t   its   cut-out,
-  
p
ass   the   child   seat   strap   behind   the   seat  
b

ackrest,   centred   between   the   holes   for   the  
h

ead   restraint   rods,
-  
s
ecure   the   upper   strap   fixing   to   the   ring   B,
-  
t
ighten   the   upper   strap.
Safety