2014.5 Citroen C4 PICASSO RHD check engine

184
Operation
Activating the function
With the engine running:
F Sel ect the " Driving assistance "
  menu   of  
t

he   touch   screen   tablet.
With
  this   menu   displayed,   select   one   of   the  
t

hree   views:
Deactivating the function
F Accelerate   so   as   to   exceed   18   mph  (
30 km/h).
or
F

Sel
ect the " Driving assistance "
  menu   of  
t

he   touch   screen   tablet.
Check
  the   cleanliness   of   the   camera  
l

enses
 r
egularly.
High pressure jet wash
When
  washing   your   vehicle,   direct  
t

he   lance   at   least   30   cm   away   from  
t

he camera.
F

P

ress this button for access to
the " 360 vision "
 sub

-menu. F

P
ress this button for access to
the " 360 vision "
 sub

-menu.
F
 
Sel
ect
 "
Camera
 O
ff".
"Front
 
camera".
"360°
 
camera". "Rear
  camera".
The view selected is displayed in the instrument panel.
360 vision
The cameras located in the front and rear b
umpers   and   under   the   door   mirrors   are a

ctivated   and   a   reconstruction   of   the   view   from
 a

bove  
y
our  
v
ehicle  
i
n  
i
ts  
i
mmediate  
s
urroundings
 i

s   displayed   in   the   instrument   panel.
Opening
  a   door   or   the   tailgate   disturbs  
t

he   360   and   rear   views.
Fitting
  the   very   cold   conditions   screen  
a

ffects   the   image   transmitted   by   the  
f

ront   camera. The
  display   in   the   instrument   panel  
d

isappears   above   9   mph   (15   km/h).
The
  image   transmitted   by   the   camera  
c

an   be   slightly   affected   by   the   presence  
o

f   the   very   cold   conditions   screen.
Driving

260
Checking tyre pressures /
inflating accessories
You can also use the compressor, without injecting   any   product,   to:
-
 
c
heck   or   adjust   the   pressure   of   your   tyres,
-
 
i
nflate   other   accessories   (balls,  
b

icycle tyres...).
F

T
urn the selector A to the "
ai
r"
position.
F
 
U
ncoil   the   black   pipe   H  
f
ully.
F
 
C
onnect   the   black   pipe   to   the  
v

alve   of   the   wheel   or   accessory.
 I

f   necessary,   fit   one   of   the   adaptors  
s

upplied   with   the   kit   first. F
 C onnect   the   compressor's   electrical  
c

onnector   to   the   vehicle's   12   V   socket.
F
 
S
tart   the   vehicle   and   let   the   engine   run.
F
 
A
djust   the   pressure   using   the   compressor  
(

to   inflate:   switch   B in position "I";
 
t

o deflate:   switch   B in position "O"
 
and  
p

ress button C),
  according   to   the   vehicle's  
t

yre   pressure   label   or   the   accessory's  
p

ressure   label.
F
 
R
emove   the   kit   then   stow   it.Should
  the   pressure   of   one   or   more  
t

yres   be   adjusted,   it   is   necessary   to  
r

einitialise   the   under-inflation   detection  
s

ystem.
Refer
  to   the   "Under-inflation   detection"  
s

ection.
Practical information

288
12 V battery
The battery is located under the bonnet.
F or   access   to   the   (+)   terminal:
F
 
r
elease   the   bonnet   using   the   interior   lever,  
t

hen   the   exterior   safety   catch,
F
 
r
aise   the   bonnet   and   secure   it   with   its   stay,
F

l
ift the plastic cover for access to
the
  (+)   terminal.
Access to the battery
Procedure for starting the engine using another battery or charging a discharged battery.
T he presence of this label, in particular
with
  the   Stop   &   Start   system,   indicates  
t

he   use   of   a   12   V   lead-acid   battery   with  
s

pecial
 t
echnology
 a
nd
 s
pecification;
 t

he   involvement   of   a   CITROËN   dealer  
o

r   a   qualified   workshop   is   essential  
w

hen   replacing   or   disconnecting   the  
b

attery.
After
  refitting   the   battery,   the   Stop   &
 S

tart   system   will   only   be   active   after   a
 c

ontinuous   period   of   immobilisation   of   the
 v

ehicle,   a   period   which   depends   on   the
 c

limatic   conditions   and   the   state   of   charge
 o

f   the   battery   (up   to   about   8   hours). When
  your   vehicle's   battery   is   discharged,   the  
e

ngine   can   be   started   using   a   slave   battery  
(

external   or   on   another   vehicle)   and   jump   lead  
c

ables.
Starting using another
battery
First check that the slave battery has a nominal   voltage   of   12   V   and   a   capacity  
a

t   least   equal   to   that   of   the   discharged  
b

attery.
Do
  not   try   to   start   the   engine   by  
c

onnecting   a   battery   charger.
Do
  not   disconnect   the   (+)   terminal   when  
t

he   engine   is   running.
Practical information

290
The batteries contain harmful substances such   as   sulphuric   acid   and   lead.   They m

ust   be   disposed   of   in   accordance
 w

ith   regulations   and   must   not,   in   any
 c

ircumstances,   be   discarded   with   household
 w

aste.
Take
  used   remote   control   batteries   and
 v

ehicle   batteries   to   a   special   collection   point.
Protect your eyes and face before handling   the   battery.
All
  operations   on   the   battery   must   be  
c

arried   out   in   a   well   ventilated   area   and  
a

way   from   naked   flames   and   sources  
o

f   sparks,   so   as   to   avoid   the   risk   of  
e

xplosion   or   fire.
Do
  not   try   to   charge   a   frozen   battery;  
t

he   battery   must   first   be   thawed   out   to  
a

void   the   risk   of   explosion.   If   the   battery  
h

as   been   frozen,   before   charging   have  
i

t   checked   by   a   CITROËN   dealer   or   a  
q

ualified   workshop   who   will   check   that  
t

he   internal   components   have   not   been  
d

amaged   and   the   casing   is   not   cracked,  
w

hich   could   cause   a   leak   of   toxic   and  
c

orrosive   acid.
Do
  not   reverse   the   polarity   and   use   only  
a

  12   V   charger.
Do
  not   disconnect   the   terminals   while  
t

he   engine   is   running.
Do
  not   charge   the   batteries   without  
d

isconnecting   the   terminals   first.
Wash
  your   hands   after wards.
It
 
is
 
advisable
 
to
 
disconnect
 
the
 
battery
 
i

f
 
the
 
vehicle
 
is
 
to
 
be
 
left
 
unused
 
for
 
m

ore
 
than
 
one
 
month.
do n
ot push the vehicle to start the
engine
  if   you   have   an   electronic   or  
a

utomatic   gearbox.Charging the battery using
a battery charger
F Disconnect   the   battery   from   the   vehicle.
F  F ollow   the   instructions   for   use   provided   by  
t

he   manufacturer   of   the   charger.
F
 
C
onnect   the   battery   starting   with   the  
n

egative   terminal   (-).
F
 
C
heck   that   the   terminals   and   connectors  
a

re   clean.   If   they   are   covered   with   sulphate  
(

whitish   or   greenish   deposit),   remove   them  
a

nd   clean   them.
With
  Stop   &   Start,   the   battery   does   not  
h

ave   to   be   disconnected   for   charging.
Do
 
not
 
apply
 
excessive
 
force
 
on
 
the
 
t

ab
 
as
 
locking
 
will
 
not
 
be
 
possible
 
if
 
the
 
c

lamp
 
is
 
not
 
positioned
 
correctly;
 
start
 
t

he
 
procedure
 
again.
Disconnecting the (+) cable
F Raise   the   locking   tab   D fully to release the
cable t erminal c lamp E.
Reconnecting the (+) cable
F Position   the   open   clamp   E of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   vertically   on   the   clamp   E to position
it
  correctly   on   the   battery.
F
 
L
ock   the   clamp   by   spreading   the  
p

ositioning   lug   and   then   lowering   the   tab   D.
Practical information

298
Driving advice
Distribution of loads
F Distribute  the   load   in   the   trailer   so   that   the h
eaviest   items   are   as   close   as   possible   to t

he   axle   and   the   nose   weight   approaches   the
 m

aximum   permitted   without   exceeding   it.
Air
  density   decreases   with   altitude,   thus  
r

educing   engine   per formance.   Above  
1 0

00 metres,   the   maximum   towed   load   must  
b

e   reduced   by   10 %   for   every   1 000   metres   of  
al

titude.
Side wind
F Take   into   account   the   increased   sensitivity  t
o   side   wind.
Cooling
Towing a trailer on a slope increases the temperature   of   the   coolant.
As
  the   fan   is   electrically   controlled,   its   cooling  
c

apacity   is   not   dependent   on   the   engine   speed.
F
 
T
o   lower   the   engine   speed,   reduce   your  
s

peed.
The
  maximum   towed   load   on   a   long   incline  
d

epends   on   the   gradient   and   the   ambient  
t

emperature.
In
  all   cases,   keep   a   check   on   the   coolant  
t

emperature. F
 
I
f   the   warning   lamp   and   the  
S

TOP
 
warning   lamp   come   on,  
s

top   the   vehicle   and   switch   off  
t

he   engine   as   soon   as   possible.
Braking
Towing a trailer increases the braking distance.
T o   avoid   overheating   of   the   brakes   on   a   long  
m

ountain   type   of   descent,   the   use   of   engine  
b

raking   is   recommended.
Ty r e s
F Check   the   tyre   pressures   of   the   towing  v
ehicle   and   of   the   trailer,   observing   the  
re

commended
 p
ressures.
Lighting
F Check  the   electrical   lighting   and   signalling  o
n   the   trailer.
Refer
 
to
 
the
 
"Technical
 
data"
 
section
 
for
 
details
 
o

f
 
the
 
weights
 
and
 
towed
 
loads
 
which
 
apply
 
to
 
y

our
 
vehicle.
When
 
not
 
towing
 
a
 
trailer,
 
remove
 
the
 
q

uickly-detachable
 
tow
 
ball
 
before
 
d

riving. The
  rear   parking   sensors   will   be  
d

eactivated   automatically   if   a   genuine  
C

ITROËN   towbar   is   used.
Practical information

304
ToTaL & CITRoËn
Partners in performance and
protecting the environment
Innovation in the search for
performance
For over 40 year, the TOTAL Research and Development   departments   have   developed   for  
C

ITROËN,   lubricants   to   match   the   latest   technical  
i

nnovations  
o
n  
C
ITROËN  
v
ehicles,  
b
oth  
f
or  
c
ompetition  
a

nd   for   everyday   motoring.
For you, this is an assurance that you will obtain of the
best
  per formance   for   your   engine.
Optimum protection for
your engine
By having your CITROËN vehicle serviced   with   TOTAL   lubricants,   you   are  
c

ontributing   towards   improving   the   life  
a

nd   per formances   of   your   engine,   while  
a

lso   protecting   the   environment.
prefers
Checks

305
bonnet
F Open  the   left   hand   front   door.
F  
L
ift   the   safety   catch   and   raise   the   bonnet.F
 U nclip   the   stay   from   its   housing   and   place  i
t   in   the   support   slot   to   hold   the   bonnet  
ope

n.
Opening
F Pull  the   release   lever,   located   at   the   bottom  o
f   the   door   aperture,   towards   you.
Closing
F Take  the   stay   out   of   its   support   slot.
F  C lip   the   stay   back   into   its   housing.
F
 
L
ower   the   bonnet   and   release   it   at   the   end  
o

f   its   travel.
F
 
P
ull   on   the   bonnet   to   check   that   it   has  
l

atched   correctly. Before
  doing   anything   under   the  
b

onnet, switch off the Stop & Start
system   to   avoid   any   risk   of   injury  
r

esulting   from   an   automatic   change   to  
S

TART   mode.
The cooling fan may star t after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades. Do
  not   open   the   bonnet   under   very  
wi

ndy
 c
onditions.
The location of the interior bonnet
release   lever   prevents   opening   of   the  
b

onnet   when   the   left   hand   front   door  
i

s   shut.
When   the   engine   is   hot,   handle   the  
e

xterior   safety   catch   and   the   stay   with  
c

are   (risk   of   burns),   using   the   protected  
a

rea.
When   the   bonnet   is   open,   take   care   not  
t

o   damage   the   safety   catch.
be

cause of the presence of electrical
equipment
  under   the   bonnet,   it   is  
r

ecommended   that   exposure   to   water  
(

rain,   washing,   ...)   be   limited.
8
Checks

306
The various caps and covers allow access for checking   the   levels   of   the   various   fluids   and   for  
r

eplacing   certain   components.
Petrol engines
1. Screenwash  and   headlamp   wash   reservoir.
2. C oolant r eservoir.
3.
 B

rake   fluid   reservoir.
4.
 B

attery   /   Fuses.
5.
 F

usebox.
6.
 A

ir   filter.
7.
 E

ngine   oil   dipstick.
8.
 E

ngine   oil   filler   cap.
Checks