26
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel, this confirms that the corresponding system has come into operation.
W arning / indicator lamp StateCause Action / Observations
Left-hand
direction indicatorflashing with buzzer.The lighting stalk is pushed down.
Right-hand
direction indicatorflashing with buzzer.The lighting stalk is pushed up.
Sidelamps fixed. The
lighting stalk is in the
"
Sidelamps"
p
osition.
Dipped beam
headlamps fixed.
The
lighting stalk is in the "Dipped
b
eam headlamps" position.
Main beam
headlamps fixed.
The
lighting stalk is pulled towards
yo
u. Pull
the stalk to return to dipped beam headlamps.
Monitoring
27
Automatic
headlamp
dippingfixed.
The lighting control stalk is in the "
AUTO" position, pulled towards
y
ou, and the function is activated
("D
riving assistance"
menu).
The
system is in dipped beam mode
a
s there is sufficient ambient light
a
nd/or the traffic conditions do not
a
llow illumination of main beam.The
camera, located in the door mirror, manages the o
peration of main beam, depending on the ambient
l
ighting and driving conditions.
Pulling
the lighting stalk again to deactivate.
For
more information on this function, refer to the
V
isibility
s
ection.
fixed. The
lighting control stalk is in the
"
AUTO" position, pulled towards
y
ou, and the function is activated
("D
riving assistance"
menu).
The
system is in main beam mode
a
s the ambient lighting and traffic
c
onditions allow it.
Warning / indicator lamp
StateCause Action / Observations
Rear foglamps fixed. The
rear foglamps are on.Turn
the ring on the stalk rear ward to switch off the
r
ear
fo
glamps.
Front foglamps
fixed. The
front foglamps are switched on
u
sing the ring on the lighting control
st
alk.Turn
the ring on the lighting control stalk rear ward
t
wice to switch off the front foglamps.
For
more information on the lighting controls, refer to the corresponding section.
1
Monitoring
28
Warning / indicator lampStateCause Action / Observations
Electric parking
brake fixed.
The
electric parking brake is applied. Release the electric parking brake to switch off the
w
arning lamp: with your foot on the brake pedal,
b
riefly push the electric parking brake control lever.
Observe
the safety recommendations.
For
more information on the electric parking brake,
r
efer to the corresponding section.
Diesel engine
pre-heating
fixed.
The "START/STOP " switch has been
pressed
(ignition on).Wait
until the warning lamp goes off before starting.
Once
it goes off, starting is immediate, on condition
t
hat you maintain pressure on the brake pedal for an
e
lectronic or automatic gearbox, or the clutch pedal is
p
ressed fully down for a manual gearbox.
The
period of illumination of the warning lamp is
d
etermined by the ambient conditions (up to about
t
hirty seconds in extreme conditions).
If
the engine does not start, switch the ignition off and
t
hen on, wait until the warning lamp goes off again,
t
hen start the engine.
Blind spot
sensors fixed.
The
blind spot monitoring function
h
as been activated.For
more information, refer to the corresponding
s
ection.
Park Assist fixed. The
Park Assist function has been
a
ctivated.For
more information, refer to the corresponding
s
ection.
Monitoring
30
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
T his is may be accompanied by an audible signal and the display of a message.
Warning / indicator lamp StateCause Action / Observations
Passenger's
airbag system fixed.
The
control switch, located at the
r
ight hand end of the dashboard is
s
et to the OFF
p
osition.
The
passenger's front airbag is
d
eactivated.Set the control to the "ON"
position to activate the
passenger's
front airbag.
In
this case, do not fit a child seat in the rear ward-
facing
position.
Dynamic
stability control
(DSC/ASR) fixed.
The
button, located on the centre
c
onsole, is pressed. Its indicator lamp
i
s on.
The
DSC/ASR is deactivated.
DSC:
dynamic stability control.
ASR:
anti-slip regulation.Press
the button to activate the DSC/ASR. Its
i
ndicator lamp goes off.
The
DSC/ASR system is activated automatically when
t
he vehicle is started.
If
deactivated, the system is reactivated automatically
f
rom around 30 mph (50 km/h).
Stop & Star t fixed. The Stop & Start
has been
deactivated. Reactivate the function via the "
Driving assistance"
menu.
Monitoring
33
Warning / indicator lampStateCause Action / Observations
Deactivation of
the automatic
functions of the
electric parking
brake fixed.
The
"automatic application"
(on
switching off the engine) and
"
automatic release" functions are
d
eactivated or faulty.
In
the event of a fault, illumination of
t
his warning lamp is accompanied by
a
message.To
reactivate the automatic functions, refer to the
"
Electric parking brake" section.
Contact
a CITROËN dealer or a qualified workshop if
a
utomatic application / release is not possible.
The
parking brake can be released manually.
For
more information on the electric parking brake,
r
efer to the corresponding section.
Electric parking
brake
flashing.
When
driving: the electric parking
b
rake is not fully released.Fully
release the parking brake by a quick press on
t
he control lever. If the warning persist, stop as soon
a
s it is safe to do so.
Contact
a CITROËN dealer or a qualified workshop.
When
stationary: parking brake
a
pplied, the system does guarantee
i
mmobilisation of the vehicle (when
p
arking on a very steep slope, for
e
xample).Secure
the immobilisation of the vehicle by engaging
a
gear with a manual or electronic gearbox, by placing
t
he gear selector in position P with an automatic
g
earbox, or by fitting a chock to one of the wheels.
Electric parking
brake fault fixed.
The
electric parking brake has a fault. Contact a CITROËN dealer or a qualified workshop
w
ithout delay.
The
parking brake can be released manually.
For
more information on the electric parking brake,
r
efer to the corresponding section.
1
Monitoring
38
Warning / indicator lampStateCause Action / Observations
AdBlue
® additive
(BlueHDi Diesel) fixed,
on switching o
n the ignition,
a
ccompanied by an
a
udible signal and a
m
essage indicating
t
he
r
emaining
d
riving
ra
nge. The
remaining driving range is b
etween 350 miles (600 km) and
1
500 miles (2400 km).Have
the AdBlue® additive tank topped up as soon a
s
possible:
go
to
a CITROËN dealer or a qualified
w
orkshop,
or
carry out this operation yourself by
r
eferring
to
the
corresponding section.
+ flashing
associated
w
ith the SERVICE
warning
lam
p,
a
ccompanied
by
an
a
udible
signal
and
a
m
essage
indicating
t
he
r
emaining
d
riving
ra
nge. The
remaining
driving
range
is
b
etween
0
and
375
miles
(600
km). You
must
top-up the
Ad
Blue
® additive tank to avoid
a
breakdown :
go
to
a
CITROËN delaer or a qualified
w
orkshop,
or
carry
out
this
operation yourself by
r
eferring
to
the
corresponding
section.
flashing,
associated
w
ith the SERVICE
warning
lam
p,
a
ccompanied
by
an
a
udible
signal
and
a
m
essage
indicating
t
hat
starting
is
p
revented. The
AdBlue
® tank is empty: t
he starting
inhibition system required
b
y
legislation prevents starting of
t
he engine. To
be able to start the engine, you must top-up the
AdBlue® additive tank: go to a CITROËN dealer or a q
ualified workshop, or carry out this operation yourself
b
y
referring to the corresponding section.
It is essential
to add at least 3.8 litres of AdBlue
® to
the
additive
tank.
Monitoring
73
Reinitialisation of
the electric windows
Deactivating the rear controls
for the rear windowsIn the event of contact during operation o
f the windows, you must reverse the
m
ovement of the window. To do this,
p
ress the switch concerned.
When
operating the passenger electric
w
indow switches, the driver must
e
nsure that nothing is preventing
c
orrect closing of the windows.
The
driver must ensure that the
p
assengers use the electric windows
c
o r r e c t l y.
Be
particularly aware of children when
o
perating
t
he
w
indows.
Be
aware of passengers or other
p
ersons present when closing the
w
indows using the the electronic key
o
r the "Keyless Entry and Starting"
s
ystem.
Following
reconnection
of
the
battery,
the
s
afety
anti-pinch
function
must
be
reinitialised.
The
safety
anti-pinch
function
is
not
active
d
uring
these
operations.
For
the
safety
of
your
children,
press
s
witch 5 to prevent operation of the
rear
windows
irrespective
of
their
p
ositions.
The
warning
lamp
in
the
button
comes
on,
a
ccompanied
by
a
message
confirming
a
ctivation.
It
remains
on,
as
long
as
the
child
l
ock
is
deactivated.
Use
of
the
rear
electric
windows
from
the
d
river's
controls
remains
possible. For
each
window:
-
l
ower
the
window
completely,
then
raise
it,
i
t
will
rise
in
steps
of
a
few
centimetres
with
e
ach
action.
Repeat
the
operation
until
the
w
indow
closes
completely,
-
c
ontinue
to
pull
the
switch
for
at
least
o
ne second
after
reaching
this
position,
w
indow
c
losed.
2
Access
77
System which registers the electrical settings of the driver's seat. It enables you to store and
r
ecall two positions using the buttons on the
s
ide of the driver's seat.
Storing driving positions
Storing a position
Using buttons M / 1 / 2
F Switch on the ignition.
F A djust your seat and the door mirrors.
F
P
ress button M , then press button 1 or 2
within
four seconds.
A
n audible signal indicates that the position
h
as been stored.
Storing
a new position cancels the previous
p
osition.
Recalling a stored position
Ignition on or engine running
F Press button 1 or 2 to recall the corresponding p osition.
A
n audible signal confirms that adjustment
i
s complete.
You
can interrupt the current movement by
p
ressing button M, 1 or 2
or by using one of the
s
eat controls.
A
stored position cannot be recalled while
d
riving.
Recalling
stored positions is deactivated
4
5 seconds after switching off the ignition.
3
Comfort