Page 67 of 494
65
Central locking control
Locking
F Press this button to lock the vehicle.
The red indicator lamp in the button comes on.
Unlocking
F Press the button again to unlock the v
ehicle.
The
red indicator lamp in the button goes off.
This
control
allows
the
simultaneous
locking
or
unlocking of the doors and boot from inside the
v
ehicle.
If
one
of
the
doors
is
open,
central
l
ocking
from
the
inside
does
not
take
p
lace. If
the vehicle is locked from the outside,
t
his button is inactive.
F
I
n this case, use the remote control
o
r the key to unlock the vehicle or
p
ull an interior door handle to open
a
door.
3
Access
Page 68 of 494

66
Activation / Deactivation
You can activate or deactivate this function permanently.
F
W
ith the ignition on, press this button
u
ntil an audible signal starts and a
c
orresponding message is displayed.
The
state of the system stays in memory when
s
witching off the ignition.
Anti-intrusion security
Operation
If one of the doors or the boot is open, the a
utomatic central locking does not take place.
This
system allows automatic simultaneous locking of the doors and boot as soon as the speed of
t
he vehicle exceeds 6 mph (10 km/h).
Pressing the central locking button unlocks the
v
ehicle.
Above
6 mph (10 km/h), this locking is
t
e m p o r a r y. This
is signalled by the sound of
t
he locks rebounding, accompanied
b
y illumination of this symbol in the
i
nstrument panel, an audible signal
a
nd the display of an alert message.
Carrying long and voluminous
objects
If
you want to drive with the boot open,
y
ou should press the central locking
b
utton to lock the the doors. Other wise,
e
very time the speed of the vehicle
e
xceeds 6 mph (10 km/h), the locks
w
ill rebound and the alerts mentioned
a
bove will appear.
Access
Page 70 of 494

68
Locking the vehicle with full
alarm system
Activation
F Switch off the ignition and get out of the v
ehicle.
F
L
ock the vehicle with the remote control.
or
F
L
ock the vehicle with the "Keyless Entry
a
nd Starting" system.
Deactivation
F Press the unlocking button on the remote c
ontrol.
or
F
U
nlock the vehicle with the "Keyless Entry
a
nd Starting" system.
The
monitoring system is deactivated: the
i
ndicator lamp in the button goes off and the
d
irection indicators flash for about 2 seconds.
If
an
opening
(door,
boot...)
is
not
closed
f
ully,
the
vehicle
is
not
locked
but
the
exterior
p
erimeter
monitoring
will
be
activated
after
a
d
elay
of
45
seconds
at
the
same
time
as
the
i
nterior
volumetric
and
anti-tilt
monitoring. When
the vehicle automatically locks
i
tself again (as happens if a door or
b
oot is not opened within 30 seconds of
u
nlocking), the monitoring system is not
r
eactivated automatically. To reactivate
t
he system, it is necessary to unlock
t
he vehicle and then lock it again using
t
he remote control or the "Keyless Entry
a
nd Starting" system.
The
monitoring
system
is
active:
the
indicator
l
amp
in
the
button
flashes
once
per
second
a
nd
the
direction
indicators
come
on
for
about
2
seconds.
Following
an
instruction
to
lock
the
vehicle,
t
he
exterior
perimeter
monitoring
is
activated
a
fter
a
delay
of
5
seconds
and
the
interior
v
olumetric
and
anti-tilt
monitoring
after
a
delay
o
f
45 seconds.
Access
Page 71 of 494

69
Locking the vehicle
with exterior perimeter
monitoring only
Deactivate the interior volumetric and anti-tilt monitoring to avoid unwanted triggering of the
a
larm in certain cases such as:
-
l
eaving a pet in the vehicle,
-
l
eaving a window partially open,
-
w
ashing your vehicle,
-
c
hanging a wheel,
-
h
aving your vehicle towed,
-
t
ransport by sea.
Deactivation of the interior
volumetric and anti-tilt monitoring
F Switch off the ignition and within t
en seconds, press the button until the
i
ndicator lamp is on continuously.
F
G
et out of the vehicle.
F
I
mmediately lock the vehicle using the
r
emote control or the Keyless Entry and
S
tarting system.
The
exterior perimeter monitoring alone is
a
ctivated: the indicator lamp in the button
f
lashes once per second.
Reactivation of the interior
volumetric and anti-tilt monitoring
F Deactivate the perimeter monitoring by u
nlocking the vehicle with the remote
c
ontrol or the Keyless Entry and Starting
s
ystem.
T
he indicator lamp in the button goes off.
F
R
eactivate all monitoring by locking the
v
ehicle with the remote control or the
K
eyless Entry and Starting system.
T
he indicator lamp in the button flashes
o
nce per second again.
To
be effective, this deactivation must
b
e carried out each time the ignition is
s
witched off.
3
Access
Page 72 of 494

70
Operating fault
When the ignition is switched on, fixed illumination of the indicator lamp in the button
i
ndicates a fault with the system.
Have
it checked by a CITROËN dealer or a
q
ualified
w
orkshop.
Failure of the remote control
To deactivate the monitoring functions:
F
u
nlock the vehicle using the key (integral to
t
he
remote
control)
in
the
driver's
door
lock,
F
o
pen the door; the alarm is triggered,
F
s
witch on the ignition; the alarm stops; the
i
ndicator lamp in the button goes off.
Locking the vehicle without
activating the alarm
F Lock or deadlock the vehicle using the key (
integral to the remote control) in the
d
river's door lock.
Triggering of the alarm
This is indicated by sounding of the siren and flashing of the direction indicators for
t
hirty seconds.
The
monitoring functions remain active until
t
he alarm has been triggered eleven times in
s
uccession.
When
the vehicle is unlocked using the remote
c
ontrol or the Keyless Entry and Starting
s
ystem, rapid flashing of the indicator lamp
i
n the button informs you that the alarm was
t
riggered during your absence. When the
i
gnition is switched on, this flashing stops
i
mmediately.
Access
Page 73 of 494

71
doors
Opening
From outside
F After unlocking the vehicle using the r
emote control, the key or with the Keyless
E
ntry and Starting system, pull the door
han
dle.
From inside
F Pull the interior control lever of a front door; t
his unlocks the vehicle completely.
Closing
- when the engine is running ,
this warning lamp comes
o
n, accompanied by an alert
m
essage for a few seconds,
With
the
selective
unlocking
activated:
-
o
pening
the
driver's
door
unlocks
t
he
driver's
door
only
(if
the
vehicle
h
as
not
already
been
completely
u
nlocked).
-
o
pening
the
passenger's
door
u
nlocks
the
rest
of
the
vehicle.
The
interior
door
controls
do
not
o
perate
w
hen
t
he
v
ehicle
i
s
d
eadlocked.
When
the
selective
unlocking
is
a
ctivated,
the
first
press
of
the
remote
c
ontrol
unlocking
button
permits
u
nlocking
of
the
driver's
door
only. When
a
door is not closed correctly:
-
w
hen the vehicle is moving (speed
h
igher than 6 mph (10 km/h)), this warning
l
amp
comes on, accompanied by an alert
m
essage for a few seconds.
3
access
Page 74 of 494
72
boot
Opening using the remote
control
F After unlocking the boot or the vehicle u
sing the remote control or the key, press
t
he opening control, then raise the tailgate.
Closing
If the tailgate is not closed correctly:
-
w
hen the engine is running ,
this
warning lamp comes on,
a
ccompanied by the display of an
a
lert message for a few seconds,
F
L
ower the tailgate using the interior grab
han
dle.
F
I
f necessary, press down on the tailgate to
f
ully close it.
-
w
hen the vehicle is moving (speed above
6
mph (10 km/h)), this warning lamp comes
o
n, accompanied by an audible signal
and
the display of an alert message for a
f
ew seconds.
access
Page 75 of 494
73
Opening using the Keyless
Entry and Starting system
Complete unlocking
F With the electronic key on your person in t
he recognition zone A,
press the opening
c
ontrol then raise the tailgate.
Selective unlocking
By default, complete unlocking is activated.
T his setting is done in the "Driving
assistance"
menu, then "Vehicle settings"
and
"Vehicle access" .
Use
this button for access to
a
dditional
in
formation.
When
unlocking of the boot only is activated:
F
W
ith the electronic key in the recognition
z
one A ,
press the boot unlocking control
t
o unlock just the tailgate, then raise the
t
ailgate.
Unlocking
is signalled by rapid flashing of the
d
irection indicators for a few seconds.F
L
ower the tailgate using one of the interior g
rab han dles.
If the boot is not closed correctly, with the
e
ngine running or when moving
(speed
a
bove 6 mph (10 km/h)), a message appears
f
or a few seconds.
Closing
3
Access