2014.5 Citroen C4 DAG turn signal

99
148 
C4-2_en_Chap09_conduite_ed01-2014
Moving off
F With your  foot  on  the  brake,  select  position
P or N.
F
 
Start
  the   engine.
If
 
this
 
procedure
 
is
 
not
 
followed,
 
there
 
is

 
an
 
audible
 
signal,
 
accompanied
 
by
 
a
 
message

  in   the   multifunction   screen.
F
 
With
 
the
 
engine
 
running,
 
press
 
the
 
brake

  pedal.
F
 
Release
 
the
 
parking
 
brake,
 
unless
 
it
 
is

  programmed   to   automatic   mode.
F

Select position
R, D or M.
F
 
Gradually
  release   the   brake   pedal.
The
  vehicle   moves   off   immediately.
If position N
 
is
 
engaged
 
inad
-
vertently
 
while
 
driving,
 
allow
 
the
 
engine

 
to
 
return
 
to
 
idle
 
then
 
en
-
gage
  position   D   to   accelerate.
When
 
the
 
engine
 
is
 
running
 
at
 
idle,

 
with
 
the
 
brakes
 
released,
 
if position

R, D or M
 
is
 
selected,
 
the

 
vehicle
 
moves
 
even
 
without
 
the

  accelerator   being   pressed.
When
 
the
 
engine
 
is
 
running,
 
never

 
leave
 
children
 
in
 
the
 
ve
-
hicle
  without   supervision.
When
 
carrying
 
out
 
maintenance
 
with

 
the
 
engine
 
running,
 
apply
 
the

 
parking
 
brake
 
and
 
select
 
po
-
sition P. A
 message

 
is
 
displayed
 
if
 
you
 
try
 
to
 move
 the  gear  lever  from  position  P
without   pressing   the   brake   pedal.
n

ever select position N while the
vehicle
  is   moving.
n

ever select positions P or R
unless
 
the
 
vehicle
 
is
 
completely
 
stationary

.
Sport and snow programmes
These two special  programmes  supple -
ment  the  automatic  operation  in  very  
specific

  conditions   of   use.
Sport programme "S"
F

Press button
"S",  
after
 
starting
 
the
 
engine.
The

 
gearbox
 
automatically
 
favours
 
a
 
dynamic

  style   of   driving.
S
 
appears
 
in
 
the
 
instrument
 
panel.
Snow programme "

T"
F

Press
button "T",  
after
 
starting
 
the
 
engine.
The

 
gearbox
 
adapts
 
to
 
driving
 
on
 
slip
-
pery
  roads.
This
 
programme
 
improves
 
starting
 
and
 
drive

  when   traction   is   poor.
T
 
appears
 
in
 
the
 
instrument
 
panel.
Return to automatic operation
F At any  time,  press  the  button  select -
ed  again  to  quit  the  programme  en -
gaged
 
and
 
return
 
to
 
auto-adaptive
 
mode.
Automatic operation
F Select position D for automatic
changing   of   the   six   gears.
The
 
gearbox
 
then
 
operates
 
in
 
auto-
adaptive

 
mode,
 
without
 
any
 
intervention
 
on

 
the
 
part
 
of
 
the
 
driver
.  
It
 
continuously
 
selects

 
the
 
most
 
suitable
 
gear
 
accord
-
ing
 
to
 
the
 
style
 
of
 
driving,
 
the
 
profile
 
of
 
the

  road   and   the   load   in   the   vehicle.
For
 
maximum
 
acceleration
 
without
 
touching

 
the
 
lever
,  
press
 
the
 
accelera
-
tor
 
pedal
 
down
 
fully
 
(kick
 
down).
 
The
 
gearbox

 
changes
 
down
 
automatically
 
or

 
maintains
 
the
 
gear
 
selected
 
until
 
the
 
maximum

  engine   speed   is   reached.
On
 
braking,
 
the
 
gearbox
 
changes
 
down
 
automatically

 
to
 
provide
 
efficient
 
engine
 
braking.
If you release the accelerator sharply

,
the
 
gearbox
 
will
 
not
 
change
 
to
 
a
 
higher
 
gear

  for   safety   reasons.
DRIVING

99
149 
C4-2_en_Chap09_conduite_ed01-2014
Manual operation
F Select position M for sequential
changing   of   the   six   gears.
F
 
Push
 
the
 
lever
 
towards
 
the
 
+
 
sign
 
to
 
change

  up   a   gear.
F
 
Pull
 
the
 
lever
 
towards
 
the
 
-
 
sign
 
to
 
change

  down   a   gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear

 
to
 
another
 
if
 
the
 
vehicle
 
speed
 
and
 
engine

 
speed
 
permit;
 
otherwise,
 
the
 
gearbox

 
will
 
operate
 
temporarily
 
in
 
au
-
tomatic
  mode.D
 
disappears
 
and
 
the
 
gears
 
engaged

 
appear
 
in
 
succes
-
sion
  in   the   instrument   panel.
If
 
the
 
engine
 
speed
 
is
 
too
 
low
 
or

 
too
 
high,
 
the
 
gear
 
selected
 
flashes

 
for
 
a
 
few
 
seconds,
 
then
 
the
 
ac
-
tual
  gear   engaged   is   displayed.
It
 
is
 
possible
 
to
 
change
 
from
 
position
 
D

(automatic)
 
to
 
position
 
M
 
(manual)
 
at
 
any

  time.
When
 
the
 
vehicle
 
is
 
stationary
 
or
 
mov
-
ing
 
very
 
slowly
,  
the
 
gearbox
 
selects
 
gear

  M1   automatically.
The
 
sport
 
and
 
snow
 
programmes
 
do
 
not

  operate   in   manual   mode.Invalid value during manual
operation
This  symbol  is  displayed  if  a  
gear

 
is
 
not
 
engaged
 
correctly
 
(selector between two posi

-
tions).
Stopping the vehicle
Before switching  of f  the  engine,  you  can
 engage  position  P or N to place the
gearbox
  in   neutral.
In
 
both
 
cases,
 
apply
 
the
 
parking
 
brake
 
to

 
immobilise
 
the
 
vehicle,
 
unless
 
it
 
is
 
programmed

  to   automatic   mode.
If the lever is not in position P,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or

 
approximately
 
45
 
seconds
 
after

 
the
 
ignition
 
is
 
switched
 
of
f,  
there

 
is
 
an
 
audible
 
signal
 
and
 
a
 
message

  appears.
F

Return
the lever to posi-
tion

P
;  
the
 
audible
 
signal
 
stops

 
and
 
the
 
message
 
dis
-
appears. You
  risk   damaging   the   gearbox:
-
 
if
 
you
 
press
 
the
 
accelera
-
tor
 
and
 
brake
 
pedals
 
at
 
the
 
same

  time,
-
 
if
 
you
 
force
 
the
 
lever
 
from
 
position P

to another position
when
  the   battery   is   flat.
When
 
the
 
ignition
 
is
 
on,
 
the

 
lighting
 
of
 
this
 
warning
 
lamp,

 
accompanied
 
by
 
an
 
audible

 
signal
 
and
 
a
 
message
 
in
 
the
 
multifunction

 
screen,
 
indicates
 
a
 
gear
-
box   malfunction.
In  
this
 
case,
 
the
 
gearbox
 
switches
 
to
 
back-up

 
mode
 
and
 
is
 
locked
 
in
 
3rd
 
gear

.  
Y
ou  
may
 
feel
 
a
 
substantial
 
knock
 
when

 
changing
 
from
 
P
to R  
and
 
from
 
N

to R.  This  will  not  cause  any  damage  to  the
  gearbox.
Do
 
not
 
exceed
 
60
 
mph
 
(100
 
km/h),
 
lo
-
cal
  speed   restrictions   permitting.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or

  a   qualified   workshop.
This
 
warning
 
lamp
 
may
 
also
 
come
 
on
 
if
 
a

  door   is   opened.
Operating fault
To reduce fuel  consumption  when
 stationary  for  long  periods  
with

 
the
 
engine
 
running
 
(traf
-
fic
 
jam...),
 
position
 
the
 
gear
 
le
-
ver at
N  
and
 
apply
 
the
 
parking
 
brake,

 
unless
 
it
 
is
 
programmed
 
in

  automatic   mode.
When
 
driving

 
through

 
flooded

 
roads

 
or

 
crossing

 
a

 
ford,

 
drive

 
at

 
walking

 
speed.
DRIVING

1010
171 
C4-2_en_Chap10_verification_ed01-2014
FUEL TANK
Capacity of the tank: approximately
60 litres.
When the low fuel level in the
tank
 
is
 
reached,
 
this
 
warning
 
lamp

 
comes
 
on
 
in
 
the
 
instru
-
ment
 
panel,
 
accompanied
 
by
 
an

 
audible
 
warning
 
and
 
the
 
dis
-
play
 
of
 
an
 
alert
 
message.
 
When
 
it

 
first
 
comes
 
on,
 
around
6 li-
tres
  of   fuel   remain   in   the   tank.
Until
 
sufficient
 
fuel
 
has
 
been
 
added,
 
ev
-
ery
 
time
 
the
 
ignition
 
is
 
switched
 
on,
 
this
 
warning

 
lamp
 
appears,
 
accompanied
 
by

 
an
 
audible
 
signal
 
and
 
an
 
alert
 
mes
-
sage.
 
When
 
driving,
 
this
 
audible
 
signal
 
and

 
the
 
display
 
of
 
this
 
alert
 
message
 
are

 
repeated
 
with
 
increasing
 
frequency
,  
as

  the   level   drops   towards   0.
You
 
must
 
refuel
 
as
 
soon
 
as
 
possible
 
to
 
avoid

  running   out.
If you run out of fuel (
d iesel), refer also
to
  "Checks".
Low fuel level Refuelling
Additions of
 fuel  must  be  of  at  least  
5  litres  to  be  registered  by  the  fuel  
gauge.
Opening

 
the
 
filler
 
cap
 
may
 
result
 
in
 
an
 
inrush

 
of
 
air
.  
This
 
vacuum
 
is
 
entirely
 
normal

 
and
 
results
 
from
 
the
 
sealing
 
of
 
the

  fuel   system.
F

Press control
A  
until
 
the
 
automatic
 
opening

  of   the   fuel   flap   is   heard.
 This

 
control
 
remains
 
active
 
for
 
a
 
few
 
minutes

 
after
 
switching
 
of
f  
the
 
igni
-
tion.
 
If
 
necessary
,  
switch
 
the
 
ignition
 
on

  again   to   reactivate   it.
F
 
T
ake  
care
 
to
 
select
 
the
 
pump
 
that
 
delivers

 
the
 
correct
 
fuel
 
for
 
your
 
ve
-
hicle.
If you are filling your tank to the top,
do not persist after the third cut-off;
this could cause your vehicle to mal-
function.
With Stop & Start, never refuel
with
 
the

 
system

 
in

 
ST

OP
 mode;

 
you

 
must

 
switch

 
of

f
 
the

 
ignition

 
with

 
the
 
key. F
 
Introduce
 
the
 
nozzle
 
so
 
as
 
to
 
push
 
in

  the   metal   non-return   flap   B.
F
 
Make
 
sure
 
that
 
the
 
nozzle
 
is
 
pushed
 
in

 
as
 
far
 
as
 
possible
 
before
 
starting
 
to

  refuel   (risk   of   blowback).
F

Maintain this  position  while  refuelling.
F Push  the   fuel   flap   to   close   it.
CHECKS

07
271
C4-2_en_Chap13b_RT6_ed01-2014
Press the button on the numerical keypad  to   recall   a   preset   station.
Or
  press   then   turn   the   thumb   wheel   at  
the

  steering   mounted   controls.
Presetting a station
After selecting a station, press one of the  buttons   on   the   numerical   keypad   for  
2

  seconds   to   preset   the   current   station.
An
  audible   signal   confirms   that   the  
station

  has   been   preset. Press RADIO.
Activate / Deactivate RDS
RDS, if activated, allows you to continue listening to the same station
  by   automatic   retuning   to   alternative   frequencies.   However,  
in

  certain   conditions,   coverage   of   an   RDS   station   may   not   be  
assured

  throughout   the   entire   country   as   radio   stations   do   not  
cover

  100   %   of   the   territory.  
This
  explains   the   loss   of   reception   of  
the

  station   during   a   journey.
Select "Guidance options " then
confirm.
Activate
  or   deactivate   "RDS" then
confirm.
RADIO