2014.5 Citroen C4 DAG light

25 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Operation indicator lamps
If  one   of   the   following   indicator   lamps   comes   on,   this   confirms   that   the   corresponding   system   has   come   into   operation.
It
  may   be   accompanied   by   an   audible   signal   and   a   message   in   the   screen.
Warning/indicator lamp is onCause Action/Observations
Left-hand direction
indicator flashing
  with  
buzzer

.The
  lighting   stalk   is   pushed  
down.
Right-hand direction
indicator flashing

  with  
buzzer

.The
  lighting   stalk   is   pushed   up.
Hazard warning lamps flashing
  with  
audible

  signal.The
  hazard   warning   lamps
 switch,

  located   on   the
 dashboard,

  has   been   operated.The
  left-hand   and   right-hand   direction  
indicators

  and   their   associated   indicator  
lamps

  flash   simultaneously.
Sidelamps fixed.The
  lighting   stalk   is   in   the  
"Sidelamps"

  position.
Dipped beam headlamps fixed.The
  lighting   stalk   is   in   the  
"Dipped

  beam   headlamps"  
position

  or   in   the   "AUTO"  
position

  in   conditions   of   low  
light.
Main beam
headlamps fixed.The

  lighting   stalk   is   pulled  
towards

  you.Pull
  the   stalk   again   to   return   to   dipped  
beam

  headlamps.
Front foglamps fixed.The
  front   foglamps   are  
switched

  on   using   the   ring   on  
the

  lighting   control   stalk.Turn
  the   ring   on   the   lighting   control   stalk  
rearwards

  twice   to   switch   off   the   front  
foglamps.
Rear foglamps fixed. The

  rear   foglamps   are   on.Turn
  the   ring   on   the   stalk   rearward   to   turn  
of

f   the   rear   foglamps.
1
MONITORING

27 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Passenger's
airbag system fixed
  in   the  seat
  belt   and  passenger's
  front  
airbag

  warning  
lamps

  display.The
  control   switch,   located  
in

  the   glove   box,   has   been  placed
  in   the   "ON"   position.
The   passenger's   front   airbag  
is

  activated.
In
  this   case,   do   not   install   a  
"rearward

  facing"   child   seat.Move the control switch to the "OFF"
position
  to   deactivate   the   passenger's  front
  airbag.
In
  this   case,   you   can   install   a   "rearward  
facing"

  child   seat.
Warning/indicator lamp
is onCause Action/Observations
Stop & Start fixed.
When
  the   vehicle   stops   (red  
lights,

  traffic   jams,   ...)   the  
Stop

  &   Start   system   has   put  
the

  engine   into   STOP
 
mode.The
  warning   lamp   goes   off   and   the  
engine

  restarts   automatically   in   START
 mode,

  as   soon   as   you   want   to   move   off.
flashes
  for   a   few  
seconds,

  then  
goes

  off.STOP
 

mode   is   temporarily  
unavailable.
or
ST

ART
 
mode   is   invoked  
automatically

.For
  more   information   on   special   cases  
with

  STOP
 
mode   and   START
 
mode,   refer  
to

  the   "Stop   &   Start"   section.
Parking space
sensors fixed.
The
  parking   space   sensors  
function

  is   selected.To
  start   measurement,   operate   the   direction
 indicator

  on   the   side   of   the   space   to   be
 measured,

  and   do   not   exceed   12   mph
 
(20

  km/h).  
A 
message   is   displayed   once   the
 measurement

  has   been   completed.
Automatic
wiping fixed.The   wiper   control   is   pushed  
downwards.
Automatic
  front   wiping   is   activated.
To   deactivate   automatic   wiping,   operate  
the

  control   stalk   downwards   or   put   the  
stalk

  into   another   position.
Lighting dimmer fixed.The   lighting   dimmer   is   making  
an

  adjustment.
You   can   adjust   the   level   of   illumination   of  
the

  instruments   between   1   and   16.
1
MONITORING

33 
C4-2_en_Chap01_controle-de-marche_ed01-2014
System allowing certain  screens  to  be  switched
  off   for   night   driving.
The
 
instrument
 
panel
 
remains
 
on
 
with
 
the

 
vehicle
 
speed,
 
electronic
 
or
 
auto
-
matic
 
gearbox
 
gear
 
selected,
 
cruise
 
control

 
or
 
speed
 
limiter
 
information,
 
if
 
in

 
use,
 
and
 
the
 
low
 
fuel
 
alerts
 
as
 
ap
-
propriate.
If
 
there
 
is
 
an
 
alert
 
or
 
a
 
change
 
in
 
a
 
function

 
or
 
to
 
a
 
setting,
 
the
 
black
 
panel
 
mode

  is   interrupted.
Black panel (black screen)
Activation
F 
With
 
the
 
vehicle
 
lighting
 
on,
 
press
 
this

 
button
 
again
 
to
 
activate
 
the
 
black

  panel.
F
 
Press
 
once
 
more
 
to
 
illu
minate  
on
 
the

  various   screens   again.
Permits manual adjustment  of  the  bright -
ness  of  the  instruments  and  controls  in relation

 
to
 
the
 
exterior
 
brightness.
 
Only operates

 
when
 
the
 
vehicle
 
lighting
 
is
 
on
 
in night

  mode.
Lighting dimmer
Activation
F
Press button
A
 to
 
change
 
the
 
bright
-
ness
  of   the   instruments   and   controls.
F
 
When
 
the
 
lighting
 
reaches
 
the
 
mini
-
mum
 
setting,
 
release
 
the
 
button,
 
then

  press   again   to   increase   it.
or
F
 
When
 
the
 
lighting
 
reaches
 
the
 
maxi
-
mum
 
setting,
 
release
 
the
 
button,
 
then

  press   again   to   reduce   it.
F
 
When
 
the
 
lighting
 
reaches
 
the
 
level
 
of

 
brightness
 
required,
 
release
 
the
 
button.Deactivation
When

 
the
 
vehicle
 
lighting
 
is
 
of
f,  
or
 
in
 
day

 
mode
 
(daytime
 
running
 
lamps
 
on),

 
pressing
 
the
 
button
 
or
 
turning
 
the
 
thumb

  wheel   does   not   have   any   effect.
You
 can  also  modify  the  level  of  lighting  
by

 
turning
 
the
 
thumb
 
wheel
 
B
,  
located
 
on

  the   left   of   the   steering   wheel:
F
 
upwards;
  to   reduce   the   level,
F
 
downwards;
  to   increase   the   level.
This
 
indicator
 
and
 
the
 
lighting
 
value

 
appear
 
in
 
the
 
middle
 
of
 
the

 
instrument
 
panel
 
during
 
adjustment

 
to
 
show
 
the
 
lighting
 
level

 
compared
 
to
 
the
 
16
 
levels
 
avail
-
able.
1
MONITORING

34 
C4-2_en_Chap01_controle-de-marche_ed01-2014
In the instrument  panel,  you  can  change the
 colour  of  its  dials  (button  A)
 indepen -
dently
  from   that   of   the   screens   (button   B).
There
 
are
 
five
 
colour
 
variants,
 
from
 
white

  to   blue.
F

press
the appropriate button as
many
 
times
 
as
 
needed
 
to
 
obtain
 
the
 
desired

  colour. This
 
menu
 
allows
 
you
 
to
 
choose
 
a
 
fam
-
ily  
of
 
polyphonic
 
sounds
 
from
 
the
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,   lighting   left   on,   key   in   ignition...).
Customising the instrument
panel colours
Customising the polyphonic
sounds
For the customisable colour
instrument panel with audio or
navigation system
F

Press the
"MENU" button for ac-
cess
  to   the   main   menu.
F
 
Select
 
the
 
"Personalisation-confi
-
guration"

  menu   and   confirm.
F
 
Select
 
the
 
"Choice
 
of
 
sounds"
 
line
 
and

  confirm.
F
 
Select
 
the
 
desired
 
family
 
of
 
sounds
 
and

  confirm.
F
 
Save
 
the
 
modifications
 
by
 
confirm
-
ing
  "OK". For
 
safety
 
reasons,
 
the
 
driver must

 
only
 
carry
 
out
 
these
 
opera
-
tion   when   stationary.
1
MONITORING

22
36 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Once the "TRIP COMPUTER"  menu  has
 been  selected,  you  can  start  diag -
nostics
 
of
 
the
 
status
 
of
 
the
 
equipment
 
(active,

  not   active,   faulty).
Trip computer Date and time
Once  
the
 
"DA
TE  
AND
 
TIME"
 
menu
 
has
 
been

 
selected,
 
you
 
have
 
access
 
to
 
the
 
following

  settings:
-  
year
,
-  
month,
-
 
day
,
-  
hours,
-
 
minutes,
-
 
12
  or   24   hour   mode.
F  
Once
 
you
 
have
 
selected
 
a
 
setting,
 
press the "

7" or "8" buttons to
change   its   value.
F
Press the "
5" or "6" buttons to
switch respectively to the previous
or   next   setting.
F

Press
the "OK"  
button
 
to
 
record
 
the

 
change
 
and
 
return
 
to
 
the
 
normal
 
display

 
or
 
press
 
the
 
"Back"
button
to
  cancel.
Languages
Once
 
the
 
"LANGUAGES"
 
menu
 
has
 
been

 
selected,
 
you
 
can
 
choose
 
the
 
lan
-
guage
 
used
 
by
 
the
 
display
,  
from
 
a
 
pre-
defined

  list.For
 
safety
 
reasons,
 
configura
-
tion
 
of
 
the
 
multifunction
 
screen
 
by

 
the
 
driver
 
must
 
only
 
be
 
done

  when   stationary.
Vehicle parameters
Once
 
the
 
"VEHICLE
 
P
ARAM"  
menu
 
has

 
been
 
selected,
 
you
 
can
 
activate
 
or
 
deactivate

  the   following   equipment:
-  
"P
ARK  
BRAKE"
 
(Automatic
 
electric
 
parking

 
brake;
 
refer
 
to
 
the
 
"Driving"
 
section).
-
 
"BEND
 
LIGHTING"
 
(Directional
 
lighting;

 
refer
 
to
 
the
 
"V
isibility"  
sec
-
tion),
-  
"AUT
O  
HEADLAMPS"
 
(Automatic
 
illu

mination  
of
 
headlamps;
 
refer
 
to
 
the "V

isibility" section),
-  
"REAR
 
WIPE
 
ACT"
 
(Rear
 
wiper
 coupled
 with  reverse  gear;  refer  to  the "V
isibility" section),
-
 
"GUIDE
 
LAMPS"
 
(Guide-me-home
 
lighting;

 
refer
 
to
 
the
 
"V
isibility"  
sec
-
tion),
-
 
"ELECTRIC
 
BOOT"
 
(Selective
 
unlocking

 
of
 
the
 
boot;
 
refer
 
to
 
the
 
"

a ccess" section),
-
 
"CABIN
 
SELECT"
 
(Selective
 
un
-
locking;
 
refer
 
to
 
the
 
"Access"
 
sec
-
tion),
-
 
"DA
Y
 LAMPS"
 
(Daytime
 
running
 
lamps;

 
refer
 
to
 
the
 
"V
isibility"  
sec
-
tion).
MULTIFUNCTION SCREENS

22
39 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
F Press the "7" or "8" buttons to set
the  value  required  (15,  30  or  60  sec -
onds),
 
then
 
press
 
the
 
"OK"
button
to
  confirm. F

Press
the "5" or "6" buttons,
then the "OK" button to select the
"OK"  
box
 
and
 
confirm
 
or
 
press
 
the
 
"Back"

  button   to   cancel.
For  
example:
 
setting
 
of
 
the
 
duration
 
of
 
the

  "follow-me-home"   lighting
F
Press
the "7
" or "8 " buttons, to select
the  
"Define
 
the
 
vehicle
 
parameters" menu,

  then   the   "OK"   button.
F
Press the "
5" or "6" buttons to
select  
the
 
"Interior
 
lighting"
 
line,
 
then the

"OK" button; then follow
the  
same
 
procedure
 
to
 
select
 
the
 
"Follow-me-home

  headlamps"   line.
-
 
"Driving

 
assistance":
●
 
"Parking brake
 automatic"  (Automatic electric
 parking  brake;  see  the "Driving"

  section),
● "Rear wipe  in  reverse  gear"  (Rear  wiper
 coupled  to  reverse  gear;  
see the "V

isibility" section),
●
 
"Speeds
 
memorised"
 
(Memorising
 
speeds;

 
see
 
the
 
"Driving"
 
sec
-
tion).
-
 
"V
ehicle  
lighting"
 
(see
 
the
 
"V
isibility"  
section):
●

 
"Directional
 
headlamps"
 
(Main
 
/
 
additional

  directional   lighting),
●
 
"Daytime
 
lights"
 
(Daytime
 
running
 
lamps).
-

 
"Interior
 
lighting"
 
(see
 
the
 
"V
isibility"  
section:
●

 
"Follow-me-home
 
headlamps"
 
(Automatic

 
operation
 
of
 
head
-
lamps
 
after
 
switching
 
of
f  
the
 
igni
-
tion),
●
 
"W
elcome  
lighting"
 
(Exterior
 
and
 
interior

  welcome   lighting).
MULTIFUNCTION SCREENS

22
40 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Choice of language
Once 
this
 
menu
 
has
 
been
 
selected,
 
you
 
can

 
choose
 
the
 
language
 
used
 
by
 
the
 
display

  from   a   pre-defined   list.
For
 
safety
 
reasons,
 
configura
-
tion
 
of
 
the
 
multifunction
 
screen
 
by

 
the
 
driver
 
must
 
only
 
be
 
done
 
when

  stationary.
Display configuration
This
 
menu
 
gives
 
access
 
to
 
the
 
following
 
settings:
-

 
"Choice
  of   units",
-
 
"Date
  and   time   adjustment",
-
 
"Display
  parameters",
-
 
"Brightness". Choice of sounds
This

 
menu
 
allows
 
you
 
to
 
choose
 
a
 
fam
-
ily
 
of
 
polyphonic
 
sounds
 
from
 
the
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,
  lighting   left   on,   key   in   ignition...).
Adjusting the date and time
F

Press
the "7" or "8" button to
display
 
the
 
"Display
 
configuration"
 
menu,

  then   press   "OK".
F

Press
the "5" or "6" button to se-
lect
 
the
 
"Date
 
and
 
time
 
adjustment"
 
button, then press

"OK".
F

Press
the "7" or "8" button to se-
lect
 
the
 
setting
 
to
 
modify
.  
Confirm
 
by

 
pressing
 
"OK"
,  
then
 
modify
 
the
 
setting

 
and
 
confirm
 
again
 
to
 
save
 
the

  modification.
F
 
Adjust
 
the
 
settings
 
one
 
by
 
one,
 
con
-
firming
  with   the   "OK"   button.
F

Press the "
5" or "6" button, then
the "OK" button to select the "OK"
box
 
and
 
confirm
 
or
 
the
 
"Back"
but-
ton
  to   cancel.
MULTIFUNCTION SCREENS

22
42 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Choice of sounds
This 
menu
 
allows
 
you
 
to
 
choose
 
a
 
family

 
of
 
polyphonic
 
sounds
 
from
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,
  lighting   left   on,   key   in   ignition...).
Display configuration
This
 
menu
 
is
 
used
 
to
 
select
 
the
 
colour scheme

 
for
 
the
 
screen,
 
adjust
 
the
 
bright
-
ness,
 
set
 
the
 
date
 
and
 
time
 
and
 
to
 
choose the

 
units
 
for
 
distance
 
(km
 
or
 
miles),
 
fuel consumption

 
(l/100
 
km,
 
mpg
 
or
 
km/l)
 
and temperature

  (°Celsius   or   °Fahrenheit).Adjusting the voice synthesiser
This
 
menu
 
is
 
used
 
to
 
adjust
 
the
 
volume
 
setting

 
for
 
navigation
 
instructions
 
and
 
to

 
choose
 
the
 
type
 
of
 
voice
 
(male
 
or
 

female).
Adjusting the date and time
-

 
Press
  on   SETUP.
-
 
Select
 
"Display
 
configuration"
 
and
 
confirm.
-

 
Select
 
"Set
 
date
 
and
 
time"
 
and
 
con
-
firm.
Select
 
"Minute
 
adjustment
 
via
 
GPS"
 
so
 
that

 
the
 
minutes
 
are
 
adjusted
 
automati
-
cally
  by   satellite   reception.
-
 
Select
 
the
 
setting
 
to
 
modify
.  
Confirm
 
by

 
pressing
 
on
 
OK
,  
then
 
modify
 
the
 
setting

 
and
 
confirm
 
again
 
to
 
save
 
the

  modification.
-
 
Adjust
  the   settings   one   by   one.
-
 
Select
 
"
OK" in the screen then con-
firm
  to   save   the   setting. Choice of language
This
 
menu
 
is
 
used
 
to
 
choose
 
the
 
language used

  by   the   screen   from   a   defined   list.
Vehicle parameters
This
 
menu
 
is
 
used
 
to
 
activate
 
or
 
deac
-
tivate
 
certain
 
driving
 
and
 
comfort
 
sys
-
tems,
  classified   by   category:
-
 
"Driver
  aid":
●
 
"Electric
 
brake*"
 
(Automatic
 
elec
-
tric
 
parking
 
brake;
 
see
 
"Driving"
 
section),
●

 
"Rear
 
wiper"
 
(Rear
 
wiper
 
coupled
 
to

 
reverse
 
gear;
 
see
 
"V
isibility"  
section),
●
 "Speed

 
limits"
 
(Memorising
 
speed settings

 
for
 
the
 
cruise
 
control
 
and speed

 
limiter;
 
see
 
"Driving"
 
section).Alert log
This

 
lists
 
the
 
active
 
alerts
 
by
 
displaying
 
in

 
turn
 
the
 
dif
ferent  
messages
 
associ
-
ated
  with   them.
-
 "V ehicle  access"  (see  "Access"  sec -
tion):
●
 "Driver

 
doors
 
selectivity"
 
(Selective unlocking

  of   the   driver's   door),
●
 
"Rear
 
doors
 
selectivity"
 
(Selective
 
unlocking

 
of
 
the
 
boot
 
using
 
the
 
centre

 
button
 
on
 
the
 
remote
 
con
-
trol;
  see   "Access   section).
-
 
"Driving
 
lights"
 
(see
 
"V
isibility"  
sec
-
tion):
●
 
"Day lights*" (Daytime  running  lamps),
● "Directional headlights"  (Main  /  additional
  directional   lighting).
-
 
"Comfort
 
lighting"
 
(see
 
"V
isibility"  
section):
●

 
"W
elcome  
lights"
 
(Interior
 
wel
-
come
  lighting),
●
 
"Running
 
lights"
 
(Automatic
 
timed
 
operation

  of   headlamps).
*
 
Depending   on   country.
MULTIFUNCTION SCREENS