2014.5 Citroen C4 CACTUS RHD boot

123
This comes on automatically when the boot is opened   and   switches   off   automatically   when  
t

he   boot   is   closed.
Different
  lighting   times   are   provided:
-
 
w
hen   the   ignition   is   off,   approximately  
t

en minutes,
-
 
i
n   energy   economy   mode,   approximately  
t

hirty   seconds,
-
 
w
hen   the   engine   is   running,   no   limit.
Boot lamp
Brightness
 
of
 
instruments
 
and
 
controls
Lighting dimmer control
Allows the manual adjustment of the brightness o
f   the   instrument   and   controls   illumination,   to  
s

uit   the   ambient   light   level.
F

Sel
ect the "Configuration"
menu.
F
 
A
djust   the   brightness   by   pressing   on  
t

he "+ " or " -"
  buttons   or   by   moving   the  
c

u r s o r.Operates
  only   when   the   sidelamps   are  
o

n.
Black screen
(Touch screen tablet)
This function is accessible in the touch screen
tablet. F

Sel
ect the "Configuration "
menu.
F

P
ress "Turn off screen ".
This function is accessible in the touch screen
tablet.
The
  screen   in   the   the   touch   screen   tablet   goes  
o

f f.
Press
  the   screen   again   (anywhere   on   its  
s

ur face)   to   switch   it   on   again.
6
Visibility

161
AdBlue® additive and SCR system
f
or
 
BlueHDi   Diesel   engines
To assure respect for the environment and c
onformity   with   the   new   Euro   6   emissions  
s

tandard,   without   adversely   affecting   the  
p

er formance   or   fuel   consumption   of   Diesel  
e

ngines,   CITROËN   has   taken   the   decision   to  
e

quip   its   vehicles   with   an   effective   system   that  
a

ssociates   SCR   (Selective   Catalytic   Reduction)  
w

ith   a   particle   filter   (FAP)   for   the   treatment   of  
e

xhaust   gases.
Presentation of the SCR system
Using an additive called AdBlue® containing urea, a
 
catalytic
 
converter
 
turns
 
up
 
to
 
85%   of   nitrous o

xides
 
(NOx)
 
into
 
nitrogen
 
and
 
water,   which   are
 h

armless
 
to
 
health
 
and
 
the
 
environment. Once
  the   AdBlue
® tank is empty, a s
ystem
 
required
  by   regulations  
p

revents
 
starting
 
of   the   engine.
If the SCR is faulty, the level of
emissions
 
from
 
your   vehicle   will   no  
l

onger
 
meet
 
the
 
Euro   6   standard:   you  
v

ehicle
 
becomes
 
polluting.
In
 
the
 
event
 
of
 
a
 
confirmed   fault  
w

ith
 
the
 
SCR
 
system,   you   must   go  
t

o
 
a
 
CITROËN
 
dealer   or   a   qualified  
w

orkshop
 
as
 
soon   as   possible:   after  
a

 
running
 
distance   of   650   miles  
(

1 100
 
km),
 
a
 
system   will   be   triggered  
a

utomatically
 
to
 
prevent   engine   starting.
The
 
AdBlue® additive is held in a special t
ank
 
located
  under   the   boot   at   the   rear   of  
t

he
 
vehicle.
 
It   has   a   capacity   of   17   litres:   this  
p

rovides
 
a
 
driving   range   of   about   12   500   miles  
(

20
 
000
 
km),
  after   which   an   alert   is   triggered  
w

arning
 
you
 
when   the   reserve   remaining   is  
e

nough
 
for
 
just   1   500   miles   (2   400   km).
During
 
each
  scheduled   service   of   your   vehicle  
b

y
 
a
 
CITROËN   dealer   or   a   qualified   workshop,  
t

he
 
AdBlue
® additive tank is refilled in order to a
llow
 
normal   operation   of   the   SCR   system.
If
 
the
 
estimated   mileage   between   two   services  
i

s
 
greater
 
than   12   500   miles   (20   000   km),   we  
r

ecommend
  that   you   go   to   a   CITROËN   dealer  
o

r
 
a
 
qualified   workshop   to   have   the   necessary  
t

op-up
 
carried   out.
9
Practical information

168
F Obtain  a   bottle   of   AdBlue®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
 Ad

Blue
® tank.
I
mportant :
 
if
 
your   vehicle's   AdBlue
®
tank
 
is
 
completely
 
empty
 
-
 
which
 
is
 
c

onfirmed
 
by
 
the
 
alert
 
messages
 
a

nd
 
the
 
impossibility
 
of
 
starting
 
the
 
e

ngine,
 
you
 
must
 
add
 
at
 
least
 
3.8
 
litres  
(

so two 1.89
 
litre
 
bottles). If
  any   additive   is   split   or   splashed,   wash  
i

mmediately  
w
ith  
c
old  
w
ater  
o
r  
w
ipe  
w
ith  
a

  damp   cloth.
If   the   additive   has   crystallised,   clean   it  
o

ff   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up after
a breakdown because of a lack of
additive ,   signalled   by   the   message   "Top
 u

p   emissions   additive:   Starting   prevented",
 y

ou   must   wait   around   5   minutes   before
 s

witching  
o
n  
t
he  
i
gnition,  
w
ithout opening
the driver's door, locking the vehicle
or introducing the key into the ignition
switch .
Switch   on   the   ignition,   then,   after
 1

0 seconds,   start   the   engine.
Never   dispose   of   AdBlue
® additive b
ottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 p

urpose
 o

r
 t

ake
 t

hem
 t
o
 y
our
 d
ealer.
F
 
A

fter
 
emptying
 
the
 
bottle,
 
wipe
 
away
 
any
 
s

pillage
 
around
 
the
 
tank
 
filler
 
using
 
a
 
damp
 
c

loth.
F
 
R

efit
 
the
 
blue
 
cap
 
to
 
the
 
tank
 
and
 
turn
 

it
 
a
 
6
th of a turn clockwise, to its stop.
F
 R
efit
 
the   black   cap   and   turn   it   a   quarter   of  
a

 
turn
  clockwise   without   pressing.   Ensure  
t

hat
 
the   indicator   on   the   cap   lines   up   with  
t

he
 
indicator   on   the   support.
F
 
D

epending   on   equipment,   return   the   spare  
w

heel
  and/or   the   storage   box   to   the   bottom  
o

f
 
the
  boot.
F
 
R

efit
 
the   boot   carpet   and   close   the   tailgate.
Practical information

176
Changing a wheel
The tools are installed in the boot under the floor,   or   may   be   located,   depending   on   version,  
u

nder
 t
he
 f
ront
 p
assenger
 sea
t.
Access to the tools
List of tools
all of these tools are specific to your
vehicle  and   can   vary   according   to   the   level  
o

f   equipment.   Do   not   use   them   for   other  
p

urposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
bol

ts.
2.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
3.
 B

olt   cover   removal   tool.
 F

or   removing   the   bolt   covers   on   alloy  
w

heels
 o
r
 t
he
 c
entral
 w
heel
 c
ap
 (
depending
 o

n   version).
4.
 R

emovable   towing   eye.
Refer
  to   the   "Towing"   section.
Procedure
 
for
 
changing
 
a
 
wheel
 
for
 
the
 
spare
 
wheel
 
using
 
the
 
tools
 
provided
 
with
 
the
 
vehicle.
Wheel with trim
When refitting the wheel
,   refit   the   trim  s
tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of  
y

our hand.
Practical information

177
F Unclip  the   tool   storage   box   by   pulling   on   it.
The   spare   wheel   is   installed   in   the   boot   under  
t

he   floor.
Spare wheel (depending on version)
Taking out the wheel
F Unscrew
  the   yellow   central   bolt.
F  R aise   the   spare   wheel   towards   you   from  
t

he   rear.
F
 
T
ake   the   wheel   out   of   the   boot.
Putting the wheel back in place
F Put  the   wheel   back   in   its   housing.
F U nscrew the yellow central bolt by a few
turns then put it in place in the centre of the
wheel.
F
 
T
ighten   fully   until   the   central   bolt   clicks   to  
r

etain   the   wheel   correctly.
F
 
C
lip   the   tool   storage   box   back   into   place.
9
Practical information

188
1. Sidelamps (W5W).
2. Brake lamps (P21W).
3.
D

irection indicators (PY21W).
4.
F

oglamp or reversing lamp (P21W).
Rear lamps
Changing bulbs
To reassemble, carry out these operations in reverse o rder.
F
 
S
pread   the   bulb   holder   retainers   and  
r

emove   the   bulb   holder.
F  
R
eplace   the   failed   bulb:
-  
f
or   the   sidelamp,   pull   the   bulb  
(

the upper one)   out,
-
 f
or   the   other   lamps,   turn   the
 c

orresponding   bulb   (lower)   a   quarter   turn.
These
 
bulbs
 
are
 
changed
 
from
 
inside
 
the
 
boot.
F
 
O

pen
 
the
 
boot.
F
 
R

emove
 
the
 
corresponding
 
access
 
cover
 
in
 
t

he
 
trim
 
panel.
F
 
D

isconnect
 
the
 
lamp
 
unit
 
connector
 
by
 
p

ressing
 
the
 
locking
 
button
 
(located
 
under
 
t

he
 
connector
 
for
 
the
 
right
 
hand
 
lamp
 
and
 
a

bove the connector for the left
hand lam
p),
F
 S
lacken
 
and
 
remove
 
the
 
nut
 
( take care not
to drop it inside the wing ).
F
 
P

ress
 
down
 
on
 
the
 
retaining
 
clip
 
for
 
lamp
 
u

nit,
 
then
 
carefully
 
remove
 
it
 
towards
 
the
 
o

utside. Take
  care   to   engage   the   lamp   unit   in  
i

ts   guides,   while   keeping   it   in   line   with  
t

he vehicle.
Tighten
  sufficiently   to   ensure   sealing,  
b

ut   without   damaging   the   lamp.
Practical information

190
F Using  a   small   flat   blade   screwdriver,   unclip  t
he   console   assembly   surrounding   the  
c

ourtesy   lamp.
F
 
R
emove   the   failed   bulb   and   change   it.
F
 
R
efit   the   console   around   the   courtesy  
l

amp,   ensuring   that   it   is   clipped   in   correctly.
Courtesy lamp
with bulbs (W5W) Courtesy lamp
with LEDs
For the replacement of the light-emitting d
iodes   (LEDs),   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Boot (W5W)
F Unclip  the   lamp   by   pushing   the   body   from  b
ehind.
F
 
R
emove   the   bulb   and   change.
F
 
R
efit   the   lamp.
Interior lighting
Practical information

204
To w i n g
General recommendations
Observe the legislation in force in your country.
E nsure   that   the   weight   of   the   towing   vehicle   is   higher   than   that   of   the   towed   vehicle.
The
  driver   must   remain   at   the   wheel   of   the   towed   vehicle   and   must   have   a   valid   driving   licence.
When
  towing   a   vehicle   with   all   four   wheels   on   the   ground,   always   use   an   approved   towing   arm;
 r

ope   and   straps   are   prohibited.
The
  towing   vehicle   must   move   off   gently.
When
  towing   a   vehicle   with   the   engine   off,   there   is   no   longer   any   power   assistance   for   braking
 o

r   steering.
In
  the   following   cases,   you   must   always   call   on   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way   or   fast   road,
-
 
f
our-wheel   drive   vehicle,
-
 
w
hen   it   is   not   possible   to   put   the   gearbox   into   neutral,   unlock   the   steering,   or   release   the
 par

king
 b
rake,
-
 
t
owing   with   only   two   wheels   on   the   ground,
-
 
w
here   there   is   no   approved   towing   arm   available...
Procedure
 
for
 
having
 
your
 
vehicle
 
towed
 
or
 
for
 
towing
 
another   vehicle   using   a   removable   towing   eye.
The towing eye
 
is
 
stowed
 
under
 
the
 
boot
 
floor,
 
o

r
 
may
 
be
 
located
 
under
 
the
 
front
 
passenger
 sea
t, d
epending o
n v
ersion.
Practical information