2014.5 Citroen BERLINGO MULTISPACE RHD boot

17
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest
items  in   the   bottom   of   the   boot,   as   close   as   possible   to   the  
rear

  seats.
Limit
  the   loads   carried   in   the   vehicle   and   reduce   wind  
resistance

  (roof   bars,   roof   rack,   bicycle   carrier,   trailer...).  
Use

  a   roof   box   in   preference.
Remove
  roof   bars   and   roof   racks   after   use.
At
  the   end   of   winter,   remove   snow   tyres   and   refit   your  
summer

  tyres.
Observe the recommendations on maintenance
Check the tyre pressures regularly, when cold, referring to the  label   in   the   door   aperture,   driver's   side.
Carry
  out   this   check   in   particular:
-
 
before
  a   long   journey,
-

at each change of season,
-

 
after
  a   long   period   out   of   use.
d

on't forget the spare wheel and the tyres on any trailer or
caravan.
Have
  your   vehicle   serviced   regularly   (engine   oil,   oil   filter,  
air

  filter,   passenger   compartment   filter...)   and   observe   the  
schedule

  of   operations   recommended   in   the   maintenance  
and

  warranty   guide.
With
  a   Blue   HDi   Diesel   engine,   if   the   SCR   system   is  
faulty

  your   vehicle   becomes   polluting;   go   to   a   CITROËN  
dealer

  or   a   qualified   workshop   without   delay   to   have   the  
emissions

  of   nitrous   oxides   brought   back   to   the   legal   level.
When refuelling, do not continue after the third cut-off of
the
  nozzle   to   avoid   any   overflow.
At
  the   wheel   of   your   new   vehicle,   it   is   only   after   the   first  
1

  800   miles   (3   000   kilometres)   that   you   will   see   the   fuel  
consumption

  settle   down   to   a   consistent   average.
2
EcO-drIVInG
Motoring & Environment

Berlingo_2_VP_en_Chap04_Ergonomie_ed02-2014
68
dEMIStInG And dEF r OS t I n GGOO d P r A ct I c E
Vents
"Leave them open"
For   optimum   distribution   and   diffusion  
of hot or cool air in the passenger
compartment,

  there   are   adjustable  
central and side vents which can
be directed sideways (right or left)
or

  vertically   (up   or   down).   For   your  
comfort

  while   driving,   do   not   close  
them

  and   direct   the   flow   of   air   towards  
the

  windows   instead.
a

ir vents in the footwells and directed
towards
  the   windscreen   complete   the  
equipment.
Do

  not   block   the   vents   located   at   the  
windscreen or the air extractor located
in

  the   boot.
dust filter, odour filter
(activated carbon)
This filter traps certain dust and limits odours.
Ensure
  that   this   filter   is   in   good  
condition

  and   have   all   of   the   filter  
elements

  replaced   regularly.
Refer to the "Checks" section of chapter 7.
Air conditioning
In all seasons, the air conditioning
should only be used with the windows
closed.  However,   if   the   interior  
temperature

  remains   high   after   a  
prolonged

  period   parked   in   the   sun,   do  
not hesitate to ventilate the passenger
compartment

  for   a   few   minutes.
Use
  the  
AUT
O   mode   as   much   as  
possible

  as   it   permits   optimised  
control

  of   all   of   the   functions:   air   flow,  
passenger

  compartment   comfort  
temperature,

  air   distribution,   air  
intake

  mode   or   air   recirculation   in   the  
passenger

  compartment.
Operate
  the   air   conditioning   system   for  
5

 
to
 
10
 
minutes,
 
once
 
or
 
twice
 
a
 
month,
 
to

  keep   it   in   good   working   order.
If
  the   system   does   not   produce   cold   air,  
do not use it and contact a CITR

o Ë n
dealer
  or   a   qualified   workshop.
Automatic mode: visibility
programme
The
 
comfort
 
programme
 
(AUTO)
 
may
 
not

 
be
 
sufficient
 
to
 
quickly
 
demist
 
or
 
defrost

 
the
 
windows
 
(humidity,
 
several
 
passengers,

 
ice).
In this case, select the visibility
programme.
 
The

 
visibility
 
programme
 
indicator

 
comes
 
on.
It activates the air conditioning, the air
flow
 
and
 
provides
 
optimum
 
distribution
 
of the ventilation to the windscreen and
side

 
windows.
It
 
deactivates
 
the
 
air
 
recirculation. It
  is   normal   that   the   condensation  
created

  by   the   air   conditioning   system  
results

  in   a   flow   of   water   which   may  
form

  a   puddle   under   the   vehicle   when  
parked.
Ventilation

Berlingo_2_VP_en_Chap04_Ergonomie_ed02-2014
 91
From insideFrom outside
rear box
This roof box can be accessed from the
  rear   seats   and   the   boot.
From
  the   rear   seats,   slide   the   flaps   to  
open.
Vents
a 3-position control allows you to
adjust   the   air   flow   through   the   vents.
The
  vents   are   also   fitted   with   a   scented  
air

  freshener.
From
 
the
 
boot,
 
place
 
your
 
thumb
 
on
 the recess then pull the handle to
open.
Open
 
carefully
 
to
 
prevent
 
objects
 
stored

 
in
 
this
 
interior
 
roof
 
box
 
from
 
fallin

g
 
out.
The
 
maximum
 
authorised
 
load
 
is
 
10
 
kg.
Practical information
EASE OF uSE and cOMFOrt
4

Berlingo_2_VP_en_Chap04_Ergonomie_ed02-2014
 97
LOAd SPAcE cOVEr (5 SEAt VE r SIO n)
This rigid shelf conceals the objects stored
  in   the   boot.
r
emoving
Fold   the   load   space   cover.
Detach   it   from   the   notches   A and B
pulling
  it   towards   you.
Raise
  it   and   remove   the   assembly.
Refitting
Place the load space cover in front
of
A and B.
Push it forwards to insert the lugs in
the
  notches.
Unfold and clip into the notches
c .
Folding
From
  the   boot,   fold   the   half-shelf,  
raising

  it   to   detach   it   from   the   notch  c . Storing (according to version)
A 
location   is   provided   in   the   back   of   the  rear
  seats   to   accommodate   the   load  
space

  cover   folded   onto   itself.
Slide it vertically between the side
guides
  located   at   mid   seat   back   height.
Insert
  the   hinge   first,   with   the   free   flaps  
turned

  upwards.
This rigid load space cover can
form
  a   shelf.   However,   for   safety  
reasons,

  do   not   place   objects  
on

  it   which   could   become   dangerous  
projectiles

  in   the   event   of   sharp   braking  
or

  rear   impact.
Practical information
EASE OF uSE and cOMFOrt
4

Berlingo_2_VP_en_Chap04_Ergonomie_ed02-2014
100
Storage flaps
Raise the corresponding flap.next to the boot sill, the recess is
intended to receive the roller tube
containing
  the   load   space   cover.
Seat belts
Ensure that the centre seat belt has
reeled in correctly to its strengthener
on  the   roof.
Prevent
  the   row   3   seat   belt   buckles  
from

  knocking   by   raising   them   as   close  
as possible to the anchorages in the
roof.
The

  seat   belt   buckle   attachment   rings  
on

  each   side   of   the   boot   must   not   be  
used

  to   retain   loads.
Practical information

Berlingo_2_VP_en_Chap04_Ergonomie_ed02-2014
101
LOAd SPAcE ScrEEn, LOAd
SP A c E c OVE r
The load space screen is a load space cover of the
blind  type   with   roller.  T ake   care   not   to   place   heavy objects

  on   the   load   space   cover   when   unrolled.
Position the load space screen so as to
present  the   rear   load   space   cover   flaps  
towards

  you.
Engage the left-hand lug of the roller in
the support A.
to install it
Place the row 3 seats in the fully folded
position.
Raise

 
the
 
storage
 
flap
 
at
 
the
 
boot
 
sill.
Take
 
hold
 
of
 
the
 
roller
 
in
 
the
 
centre
 
and
 compress
 
it
 
towards
 
the
 
left-hand
 
pillar.
Raise
 
the
 
assembly. Compress
  then   place   the   right-hand  lug facing the support
B.
Release to engage the roller in its
support.
Unroll the load space cover to the rear
side
  pillars.
Engage the ends in the rear notches to
keep
  it   taut.
Practical information
EaSE oF USE and CoMFoRT
4

Berlingo_2_VP_en_Chap04_Ergonomie_ed02-2014
102
to remove it
From   the   boot,   pull   the   load   space  
cover

  towards   you   to   release   it   from  
the

  side   pillars.
Guide
  the   load   space   cover   as   it   rolls   up.
Remove
  the   clips   of   the   three   flaps  
from

  the   base   of   each   row   2   head  
restraint.
Compress

  the   roller   to   the   left   to  
remove

  it   from   the   support   B.
Raise
  it   and   pivot   it   forwards.to store it
Store it in the recess at the boot sill,
with
  the   two   rear   flaps   uppermost.
First,
  compress   the   load   space   screen  
to

  the   left.
Release.
Arrange
  the   two   flaps   and   close   the  
storage

  flap.
The
 
roller
 
is
 
fitted
 
with
 
three
 
flaps
 
permitting

 
concealment
 
of
 
the
 
boot, whether the row 2 seats
are

 
in
 
the
 
normal
 
position
 
or
 
the
 
comfort

 
position.
Each
 
flap
 
has
 
two
 
clips
 
which
 
are
 
hooked

 
on
 
the
 
base
 
of
 
each
 
head
 
restraint.
Practical information

Berlingo_2_VP_en_Chap07_Verification_ed02-2014
 149
AdBLuE® AddItIVE
A

nd S
cr
SYS t EM
FO
r B
L
u
E H dI dIESEL


E

n
GI
n
ES
To assure respect for the environment and   conformity   with   the   new   Euro   6  
emissions

  standard,   without   adversely  
af

fecting   the   performance   or   fuel  
consumption

  of   Diesel   engines,  
CITROËN

  has   taken   the   decision   to  
equip

  its   vehicles   with   an   effective  
system

  that   associates   SCR   (Selective  
Catalytic Reduction) with a particle
filter

  (FAP)   for   the   treatment   of   exhaust  
gases.
Presentation of the Scr system
Using an additive called adBlue®
containing urea, a catalytic converter
turns up to 85% of nitrous oxides
(
no
x) into nitrogen and water, which
are
 
harmless
 
to
 
health
 
and
 
the
 
environment.
The

a
dBlue
® additive is held in a
special
 
tank
 
located   under   the   boot  
at

 
the
 
rear
 
of   the   vehicle.   It   has   a  
capacity

 
of
 
17   litres:   this   provides   a  
driving

 
range   of   about   12   500   miles  
(20

 
000 km),   after   which   an   alert  
is triggered warning you when the
reserve

 
remaining   is   enough   for   just  
1
 
500
 
miles
 
(2   400   km).
d

uring each scheduled service of
your vehicle by a CITR
o Ë n dealer
or
 
a
 
qualified   workshop,   the  
AdBlue®
additive
 
tank
 
is
 
refilled
 
in
 
order
 
to
 
allow  
normal

 
operation
 
of
 
the
 
SCR
 
system.
If
 
the
 
estimated
 
mileage
 
between
 

two services is greater than
12 500 miles
 
(20
 
000
 
km),
 
we
 
recommend

 
that
 
you
 
go
 
to
 
a
 
CITROËN  
dealer

 
or
 
a
 
qualified
 
workshop
 
to
 
have  
the

 
necessary
 
top-up
 
carried
 
out.
o
nce the a dBlue
® tank is empty, a
 
system
 
required   by   regulations  
prevents

 
starting
 
of   the   engine.
If the SCR

is faulty, the level of
emissions
 
from
 
your
 
vehicle   will   no  
longer

 
meet
 
the
 
Euro
 
6   standard:   you  
vehicle

 
becomes
 
polluting.
In
 
the
 
event
 
of
 
a
 
confirmed   fault  
with

 
the
 
SCR
 
system,
 
you   must   go  
to

 
a
 
CITROËN
 
dealer
 
or   a   qualified  
workshop

 
as
 
soon
 
as
 
possible:   after  
a
 
running
 
distance
 
of
 
650   miles  
(1
 
100
 
km),
 
a
 
system
 
will   be   triggered  
automatically

 
to
 
prevent   engine  
starting.
AdBlue® additive
cHEcKS
7