2013 YAMAHA RHINO 700 oil

EVU00050
CONTENTS
LOCATION OF THE WARNING
AND SPECIFICATION LABELS ....... 1-1
SAFETY INFORMATION.................. 2-1
DESCRIPTION ................................. 3-1
INSTRUMENT AND CONTROL
FUNCTIONS ..................................... 4-1Main switch ...................................... 4-1
Indicator lights and warning lights ... 4-2
Multi-function meter unit .................. 4-6
Light switch .................................... 4-12
Horn switch .................................... 4-14
Accelerator pedal .......................... 4-15
Brake pedal ................................... 4-15
Parking brake lever ....................... 4-16
Drive select lever ........................... 4-16
Fuel tank cap ................................. 4-17
Doors ............................................. 4-17
Seats ............................................. 4-18
1234
Seat belts .......................................4-19
Glove compartment .......................4-19
Cup holders....................................4-20
Cargo bed ......................................4-21
Adjusting the front and rear shock
absorber assemblies
(YXR7FD/YXR700FAD) ..............4-23
Adjusting the front shock absorber
assemblies (YXR7FSPD) ............4-25
Adjusting the rear shock absorber assemblies (YXR7FSPD) ............4-30
Trailer hitch bracket and receiver ........................................4-36
Auxiliary DC jack ............................4-36
FOR YOUR SAFETY –
PRE-OPERATION CHECKS ............5-1 Front and rear brakes ......................5-3
Fuel ..................................................5-4
Engine oil .........................................5-6
Coolant.............................................5-6
Final gear oil ....................................5-7
Differential gear oil ...........................5-7
5
1RB7A_EE.book Page 1 Tuesday, April 24, 2012 9:07 AM

Hills ................................................ 7-20
Uphill.............................................. 7-21
Downhill ......................................... 7-22
Rough terrain................................. 7-23
Pavement ...................................... 7-23
Water ............................................. 7-23
Loose terrain/slippery terrain......... 7-24
Brush or wooded areas ................. 7-25
Encountering obstacles ................. 7-25
PERIODIC MAINTENANCE AND
ADJUSTMENT .................................. 8-1 Owner’s manual and tool kit ............ 8-2
Periodic maintenance chart for the emission control system .......... 8-4
General maintenance and lubrication chart ............................. 8-5
Hood ................................................ 8-7
Console ........................................... 8-9
Engine oil and oil filter cartridge .... 8-10
Final gear oil .................................. 8-15
Differential gear oil......................... 8-18
Coolant .......................................... 8-22 Axle boots ......................................8-23
Spark plug inspection ....................8-24
Cleaning the air filter element ........8-27
Drive select lever box check
hose .............................................8-32
V-belt cooling duct check hose ......8-32
V-belt case drain plug ....................8-33
Cleaning the spark arrester ...........8-33
Valve clearance .............................8-34
Brakes ............................................8-35
Checking the front and rear brake pads .............................................8-35
Checking the parking brake pads .............................................8-36
Checking the brake fluid level........8-36
Brake fluid replacement .................8-37
Checking the brake pedal ..............8-38
Parking brake lever free play adjustment ...................................8-38
Brake light switch adjustment ........8-40
Cable inspection and lubrication....8-41
Brake pedal and accelerator pedal lubrication.....................................8-41
81RB7A_EE.book Page 3 Tuesday, April 24, 2012 9:07 AM

3-1
1
23
4
5
6
7
8
9
10
11
12
13
14
EVU00080
1-DESCRIPTION
1. Headlights
2. Front shock absorber assembly
3. Brake fluid reservoir
4. Air filter element
5. V-belt case
6. Driver seat
7. Driver seat belt
8. Cargo bed
9. Tail/brake lights
10. Rear shock absorber assembly
11. Cargo bed release levers
12. Spark plug
13. Door 14. Spark arrester
15. Passenger seat belt
16. Sun top (YXR7FSPD)
17. Passenger seat
18. Passenger handholds
19. Engine oil dipstick
20. Battery
21. Fuses
22. Coolant reservoir
23. Radiator cap
24. Oil filter cartridge
25. Fuel tank cap
CBA 089
IHGF
EJKLM
AC
NO
D
1RB7A_EE.book Page 1 Tuesday, April 24, 2012 9:07 AM

4-30
WARNING
●
Suspension components become hot
during operation. Never touch the
compression damping force adjusting
screw, the rebound damping force ad-
justing screw or the oil reservoir with
your bare hand or skin until suspen-
sion components have cooled.
●
Always adjust the shock absorber as-
semblies on the left and right side to
the same setting. Uneven adjustment
can cause poor handling and loss of
stability, which could lead to an acci-
dent.
5UG1B002Adjusting the rear shock absorber
assemblies (YXR7FSPD)
WARNING
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and
understand the following information be-
fore handling the shock absorber assem-
blies.●
Do not tamper with or attempt to open
the cylinder assemblies.
●
Do not subject the shock absorber as-
semblies to an open flame or other
high heat source. This may cause the
unit to explode due to excessive gas
pressure.
1RB7A_EE.book Page 30 Tuesday, April 24, 2012 9:07 AM

4-35
TIPAlthough the total number of clicks of a damp-
ing force adjusting mechanism may not exact-
ly match the above specifications due to small
differences in production, the actual number
of clicks always represents the entire adjust-
ing range. To obtain a precise adjustment, it
would be advisable to check the number of
clicks of each damping force adjusting mech-
anism and to modify the specifications as nec-
essary.
WARNING
●
Suspension components become hot
during operation. Never touch the
compression damping force adjusting
screw, the rebound damping force ad-
justing screw or the oil reservoir with
your bare hand or skin until suspen-
sion components have cooled.
●
Always adjust the shock absorber as-
semblies on the left and right side to
the same setting. Uneven adjustment
can cause poor handling and loss of
stability, which could lead to an acci-
dent.
1RB7A_EE.book Page 35 Tuesday, April 24, 2012 9:07 AM

5-1
EVU01200
1-FOR YOUR SAFETY – PRE-OPERATION CHECKS
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in the Own-
er’s Manual.
WARNING
Failure to inspect or maintain the vehicle properly increases the possibility of an accident
or equipment damage. Do not operate the vehicle if you find any problem. If a problem
cannot be corrected by the procedures provided in this manual, have the vehicle inspect-
ed by a Yamaha dealer.Before using this vehicle, check the following points:
ITEMROUTINE PAGE
Brakes Check operation, free play, fluid level, and fluid leakage.
Fill with DOT 4 brake fluid if necessary. 5-3, 8-35–8-38, 8-40
Parking brake Check for proper operation, condition, and free play. 8-38–8-39
Fuel Check fuel level.
Fill with fuel if necessary. 5-4–5-5
Engine oil Check oil level.
Fill with oil to proper level if necessary. 5-6, 8-10–8-15
Coolant Check coolant level.
Fill with coolant if necessary. 5-6, 8-22–8-23
1RB7A_EE.book Page 1 Tuesday, April 24, 2012 9:07 AM

5-2
1
2
3
45
6
7
8
9
10
11
12
13
14
Final gear oil/
Differential gear oil
Check for leakage. 5-7, 8-15–8-21
Accelerator pedal Check for proper accelerator pedal operation. 5-7
Seat belts Check for proper operation and belt wear. 5-7–5-8
Steering Check for proper operation. 5-8
Fittings and fasteners Check all fittings and fasteners. 5-8
Instruments, lights and
switches Check operation, and correct if necessary. 5-8, 8-55–8-60
Wheels and tires Check tire pressure and for wear and damage. 5-9–5-10, 8-44–8-46
Axle boots Check for damage. 8-23–8-24
ITEM ROUTINE PAGE
1RB7A_EE.book Page 2 Tuesday, April 24, 2012 9:07 AM

5-6
EVU00410Engine oil
Make sure the engine oil is at the specified
level. Add oil as necessary. (See pages 8-10–
8-15.)NOTICE●
In order to prevent clutch slippage
(since the engine oil also lubricates
the clutch), do not mix any chemical
additives with oil. Do not use oils with
a diesel specification of “CD” or oils
of a higher quality than specified. In
addition, do not use oils labeled “EN-
ERGY CONSERVING II” or higher.
●
Make sure that no foreign material en-
ters the crankcase.
EVU00420Coolant
Check the coolant level in the coolant reser-
voir when the engine is cold (the coolant level
will vary with engine temperature).
The coolant level is satisfactory if it is between
the minimum and maximum level marks on
the coolant reservoir. If the coolant level is at
or below the minimum level mark, add addi-
tional coolant to bring the level up to maxi-
mum level mark. If coolant is not available,
add distilled water. Change the coolant every
two years. (See pages 8-22–8-23 for details.)NOTICEHard water or salt water is harmful to the
engine. You may use soft water if you can-
not get distilled water.
Recommended engine oil type and
quantity:See pages 10-1–10-2.
Coolant reservoir capacity
(up to the maximum level mark):0.32 L (0.34 US qt, 0.28 Imp.qt)
1RB7A_EE.book Page 6 Tuesday, April 24, 2012 9:07 AM