2013 YAMAHA RHINO 700 length

7-8
2. If the latch plate is not positioned in thecorrect location along the seat belt,
squeeze the latch plate ends together
along its long edges in order to more eas-
ily adjust its location up or down along the
length of the belt.
3. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make
sure it is secure.
1. Buckle 2. Latch plate
3. Release button4. Put the lap portion of the belt low on your
hips. Pull up on the shoulder part so the
belt is snug across your hips. Be sure the
seat belt is not caught on the hip restraint
or other object.
5. Position the shoulder belt over your shoulder and across your chest. The
shoulder belt should fit against your
chest. If it is loose, pull the belt out all the
way and then let it retract.
1
3
2
1RB7A_EE.book Page 8 Tuesday, April 24, 2012 9:07 AM

10-1
EBU25960
1-SPECIFICATIONS
Dimensions:Overall length:2885 mm (113.6 in)
Overall width: 1385 mm (54.5 in)
Overall height:
YXR7FD 1853 mm (73.0 in)
YXR7FSPD 1901 mm (74.8 in)
YXR700FAD 1853 mm (73.0 in)
Seat height: 818 mm (32.2 in)
Wheelbase:
1910 mm (75.2 in)
Ground clearance: 280 mm (11.0 in)
Minimum turning radius: 3900 mm (154 in)Weight:With oil and fuel:YXR7FD 540.0 kg (1190 lb)
YXR7FSPD 548.0 kg (1208 lb)
YXR700FAD 540.0 kg (1190 lb)Noise and vibration level:Noise level (77/311/EEC):YXR7FD 80.2 dB(A)
YXR7FSPD 80.2 dB(A)
Vibration on seat (EN1032, ISO5008): YXR7FD Will not exceed 0.5 m/s
2
YXR7FSPD Will not exceed 0.5 m/s2
Vibration on handlebar (EN1032, ISO5008): YXR7FD Will not exceed 2.5 m/s
2
YXR7FSPD Will not exceed 2.5 m/s2
Engine:Engine type: Liquid cooled 4-stroke, SOHC
Cylinder arrangement: Single cylinder
Displacement:
686 cm³
Bore × stroke:
102.0 × 84.0 mm (4.02 × 3.31 in)
Compression ratio: 9.20 : 1
Starting system:
Electric starter
Lubrication system: Wet sumpEngine oil:Recommended brand:
YAMALUBE
1RB7A_EE.book Page 1 Tuesday, April 24, 2012 9:07 AM

10-5
Coolant temperature warning light:
LED
Engine trouble warning light: LED
Parking brake indicator light:
LED
On-Command four-wheel-drive/differential gear lock indica-
tor:
LCD
High-range indicator light: LED
Low-range indicator light: LED
Differential gear lock indicator light:
LED
Helmet/Seat belt indicator light: 14 V, 1.7 W
Fuses:Main fuse:
40.0 A
Fuel injection system fuse: 10.0 A
Headlight fuse: 15.0 A
Signaling system fuse:
10.0 A
Ignition fuse: 10.0 A
Auxiliary DC jack fuse: 10.0 A
Backup fuse:
10.0 A Four-wheel-drive motor fuse:
10.0 A
Radiator fan fuse: 25.0 A
For Europe only
The figures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not further precautions are required.
Factors that influence the actual level of exposure
of work-force include the characteristics of the
work room, the other sources of noise, etc. i.e. the
number of machines and other adjacent process-
es, and the length of time for which an operator is
exposed to the noise. Also the permissible expo-
sure level can vary from country. This information,
however, will enable the user of the machine to
make a better evaluation of the hazard and risk.
1RB7A_EE.book Page 5 Tuesday, April 24, 2012 9:07 AM