2013 YAMAHA RHINO 700 four wheel drive

Accelerator pedal ............................ 5-7
Seat belts ........................................ 5-7
Steering ........................................... 5-8
Fittings and fasteners...................... 5-8
Instruments, lights and switches ..... 5-8
Control cables ................................. 5-8
Tires ................................................ 5-9
OPERATION..................................... 6-1 Engine break-in ............................... 6-1
Starting the engine .......................... 6-2
Drive select lever operation and reverse driving............................... 6-4
On-Command four-wheel-drive
switch and differential gear lock
switch ............................................ 6-6
Parking ............................................ 6-8
Loading ........................................... 6-9
BASIC GUIDE FOR SAFE USE....... 7-1 KNOW YOUR VEHICLE................. 7-1
Driver requirements ........................ 7-3
Passenger requirements................. 7-4 Occupant protection system............ 7-4
Protective structure.......................... 7-6
Seat belts ......................................... 7-6
Doors ............................................... 7-9
Passenger handholds.................... 7-10
Seat and hip restraints .................. 7-11
Floorboard ..................................... 7-11
Steering wheel ............................... 7-12
LEARNING TO OPERATE
YOUR VEHICLE.......................... 7-13
Personal protective equipment...... 7-13
Practice for new Rhino users ........ 7-14
Getting ready to ride ...................... 7-15
Turning........................................... 7-15
Accelerating ................................... 7-16
Braking........................................... 7-17
Engine braking............................... 7-17
Leaving the vehicle ........................ 7-18
Parking on a flat area .................... 7-18
Parking on a slope ......................... 7-18
Loading .......................................... 7-19
Operation on different surfaces and terrains.................................. 7-19
67
1RB7A_EE.book Page 2 Tuesday, April 24, 2012 9:07 AM

3-2
26. Light switch
27. Steering wheel
28. Main switch
29. On-Command four-wheel-drive and differential gear lock switches
30. Multi-function meter unit
31. Helmet/Seat belt indicator light
32. Auxiliary DC jack
33. Drive select lever
34. Parking brake lever
35. Accelerator pedal
36. Brake pedal
37. Horn switch
The vehicle you have purchased may differ
slightly from those shown in the figures of this
manual.
RS
P
Q T
YZ
X
H
W
[
U
V
1RB7A_EE.book Page 2 Tuesday, April 24, 2012 9:07 AM

4-2
EVU00150Indicator lights and warning lights1. On-Command differential gear lock indicator light “DIFF. LOCK”
2. Low-range indicator light “L”
3. High-range indicator light “H”
4. Neutral indicator light “N”
5. Reverse indicator light “R”
6. Parking brake indicator light “P”
7. On-Command four-wheel-drive/differential gear lock indicator “ ”/“ ”
8. Coolant temperature warning light “ ”
9. Engine trouble warning light “ ”
EVU01140Low-range indicator light “L”
This indicator light comes on when the drive
select lever is in the “L” position.EVU01150High-range indicator light “H”
This indicator light comes on when the drive
select lever is in the “H” position.
1
2
3
4
5
6
8
9
7
DIFF.
LOCK
1RB7A_EE.book Page 2 Tuesday, April 24, 2012 9:07 AM

4-3
EVU00170Neutral indicator light “N”
This indicator light comes on when the drive
select lever is in the “N” position.5B410001Reverse indicator light “R”
This indicator light comes on when the drive
select lever is in the “R” position.EVU00210Parking brake indicator light “P”
This indicator light comes on when the park-
ing brake is applied.
EBU29621On-Command four-wheel-drive indicator
“ ”, On-Command differential gear lock
indicator “ ” and indicator light “DIFF.
LOCK”
The On-Command four-wheel-drive indicator
“ ” comes on when the On-Command four-
wheel-drive switch is set to the “4WD” posi-
tion.
The On-Command differential gear lock indi-
cator “ ” and the On-Command differential
gear lock indicator light “DIFF. LOCK” come
on when the On-Command differential gear
lock switch is set to the “LOCK” position.
DIFF.
LOCK
DIFF.
LOCK
1RB7A_EE.book Page 3 Tuesday, April 24, 2012 9:07 AM

4-4
TIP●
Due to the synchronizing mechanism in
the differential gear case, the four-wheel-
drive indicator may not come on until the
Rhino starts moving.
●
When the On-Command differential gear
lock switch is set to “LOCK” or “4WD”, the
indicator “ ” and the indicator light
“DIFF. LOCK” will flash until the differen-
tial gear is completely locked or un-
locked. If the indicator and the indicator
light continue to flash, the differential is
not completely locked or unlocked. In this
case, start moving to allow time for the
differential to lock or unlock.
5B410002Coolant temperature warning light “ ”
If the coolant temperature reaches a specific
level, this light comes on to warn that the cool-
ant temperature is too hot. If the light comes
on during operation, stop the engine as soon
as it is safe to do so and allow the engine to
cool down for about 10 minutes.
(See page 8-62.)
The electrical circuit of the warning light can
be checked by turning the key to “ON”. If the
warning light does not come on initially when
the key is turned to “ON”, or if the warning light
remains on, have a Yamaha dealer check the
electrical circuit.
DIFF.
LOCK
1RB7A_EE.book Page 4 Tuesday, April 24, 2012 9:07 AM

4-13
NOTICEDo not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point
that the starter motor will not operate
properly. If this should happen, remove
the battery and recharge it.
EVU01183On-Command four-wheel-drive and differ-
ential gear lock switches1. On-Command four-wheel-drive switch “2WD”/“4WD”
2. On-Command differential gear lock switch “4WD”/“LOCK”This vehicle is equipped with an On-Com-
mand four-wheel-drive switch “2WD”/“4WD”
and a differential gear lock switch “4WD”/
“LOCK”. Select the appropriate drive accord-
ing to terrain and conditions.●
“2WD” (two-wheel drive): Power is supplied
to the rear wheels only.
1RB7A_EE.book Page 13 Tuesday, April 24, 2012 9:07 AM

4-14
●
“4WD” (four-wheel drive): Power is sup-
plied to the rear and front wheels.
●
“LOCK” (four-wheel drive with the differen-
tial gear locked): Power is supplied to the
rear and front wheels with the differential
gear locked. Unlike the “4WD” mode, all
wheels turn at the same speed regardless
of traction.
EVU01280Horn switch “ ”
Press the switch to sound the horn.1. Horn switch “ ”
1
1RB7A_EE.book Page 14 Tuesday, April 24, 2012 9:07 AM

6-6
5B410009On-Command four-wheel-drive switch and
differential gear lock switch
You may notice that the vehicle handles dif-
ferently in “2WD”, “4WD”, and “LOCK”. For
example, you should expect that the vehicle
will require more effort to turn in “LOCK”. Al-
ways stop the vehicle before changing be-
tween “2WD” and “4WD” or “4WD” and
“LOCK”.“2WD”/“4WD”
To change from “2WD” to “4WD”, stop the ve-
hicle, and then set the switch to “4WD”. When
the vehicle is in four-wheel drive, the four-
wheel-drive indicator “ ” will come on in the
multi-function display. To change from “4WD”
to “2WD”, stop the vehicle, and then set the
switch to “2WD”.
1. On-Command four-wheel-drive switch “2WD”/“4WD”
1RB7A_EE.book Page 6 Tuesday, April 24, 2012 9:07 AM