8-49
8
TIPTapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.4. Lower the ATV to the ground.
5. Tighten the wheel nuts to the specifiedtorques.
EBU25720Troubleshooting Although Yamaha ATVs receive a thorough in-
spection before shipment from the factory, trouble
may occur during operation. Any problem in the fu-
el, compression, or ignition systems, for example,
can cause poor starting and loss of power.
The following troubleshooting chart represents a
quick and easy procedure for checking these vital
systems yourself. However, should your ATV re-
quire any repair, take it to a Yamaha dealer, whose
skilled technicians have the necessary tools, expe-
rience, and know-how to service the ATV properly.
Use only genuine Yamaha replacement parts. Im-
itation parts may look like Yamaha parts, but they
are often inferior, have a shorter service life and
can lead to expensive repair bills.
1. Tapered nut
1
Tightening torques:Fro nt wh ee l nu t:55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut: 55 Nm (5.5 m·kgf, 40 ft·lbf)
U1PY61E0.book Page 49 Wednesday, March 14, 2012 5:22 PM
10-1
10
EBU25961
SPECIFICATIONS
Dimensions:Overall length:1700 mm (66.9 in)
Overall width: 990 mm (39.0 in)
Overall height:
980 mm (38.6 in)
Seat height: 685 mm (27.0 in)
Wheelbase: 1080 mm (42.5 in)
Ground clearance:
145 mm (5.7 in)
Minimum turning radius: 2900 mm (114 in)Weight:With oil and fuel:
152.0 kg (335 lb)Noise and vibration level:Noise level (77/311/EEC):78.0 dB(A)@3500 r/min
Vibration on seat (EN1032, ISO5008):
Will not exceed 0.5 m/s²
Vibration on handlebar (EN1032, ISO5008): Will not exceed 2.5 m/s²Engine:Engine type:
Air cooled 4-stroke, SOHC Cylinder arrangement:
Single cylinder
Displacement: 124 cm³
Bore × stroke:
49.0 × 66.0 mm (1.93 × 2.60 in)
Compression ratio:
9.00 : 1
Starting system: Electric starter
Lubrication system: Wet sump
Engine oil:Recommended brand:YAMALUBE
U1PY61E0.book Page 1 Wednesday, March 14, 2012 5:22 PM
