2013 VOLKSWAGEN JETTA lock

[x] Cancel search: lock

Page 176 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
  WARNING 
Parking improperly can cause serious personal injury. 
�x Never remove the key from the ignition switch while the vehicle is moving or rolling to a 
stop. The steering wheel will lock and

Page 184 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
Anti-Lock Brake System (ABS) 
ABS helps to keep the wheels from locking up and helps to maintain the drivers ability to steer and 
control the vehicle. This means the vehicle is less likely to skid

Page 187 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
The brake fluid level drops slightly when the vehicle is being used as the brake pads wear and the 
brakes are automatically adjusted. 
Changing brake fluid 
Brake fluid must be changed according to

Page 193 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
Lights 
up Possible cause  Proper response 
�D 
Power steering assist is reduced. 
Stop, restart the engine, and drive a short 
distance. If the yellow warning light does not 
come on again, you do

Page 195 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
surface that provides uneven traction, the vehicle could pull to the right or left. ESC detects this 
situation and helps the driver counter-steer with additional steering power ⇒. 
  WARNING 
The

Page 233 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
  WARNING 
The engine compartment of any motor vehicle is a potentially dangerous area and can cause 
serious personal injury. 
�x Always use extreme caution when doing any work in the engine compar

Page 235 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
  WARNING 
Operating fluids and some materials in the engine compartment can catch fire easily, causing 
burns and other serious personal injuries! 
�x Never smoke near the engine compartment. 
�x N

Page 237 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
�x Push the outside hood release lever B (arrow) and lift the hood all the way up. 
�x Pull the hood support out of its bracket in the direction of the arrow ⇒fig. 131 A and insert it into 
the op