Page 217 of 339
Buttons,
knobs More information: Manual AC ⇒fig. 123
<
Defroster: Airflow is directed to the windshield. Recirculation mode switches off
automatically in this position. Increases the fan speed to clear the windshield as
quickly as possible. The cooling system switches on automatically to dehumidify the
air.
K Air distribution to the air vents in the instrument panel.
L Air distribution to the footwells.
u Air distribution to the windshield and footwells.
= Rear window defroster: Works only when the engine is running and switches off
automatically after 10 minutes or less.
3 Air recirculation mode .
A, [ Buttons for seat heating
!
Page 219 of 339
Settings for optimum visibility
When you switch on the cooling system, both the temperature and humidity in the vehicle are reduced.
This will help make passengers feel more comfortable and help keep the windows from fogging up.
x Switch off the air recirculation .
x Set the fan to the desired speed.
x Turn the temperature knob to the center position.
x Open and adjust all air vents in the instrument panel .
x Turn the air distribution knob to the desired setting.
x Push the !
Page 282 of 339
NOTICE
x Only refill with suitable operating fluids. When changing or topping off fluids, make sure
that you pour the fluids into the correct reservoirs. Adding incorrect fluids will cause serious
malfunctions and engine damage! Under no circumstances should you mix up operating fluids.
Otherwise serious malfunctions and engine damage can occur!
x Accessories and other things installed in front of the cooling air intakes impair the
efficiency of the engine coolant. The engine can overheat under high outside temperatures or
under high engine loads!
Leaking operating fluids can pollute the environment. Collect leaking operating fluids in suitable
containers and dispose of them properly in accordance with applicable environmental laws and
regulations.
CB radio equipment
