2013 VOLKSWAGEN JETTA key

[x] Cancel search: key

Page 56 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
  WARNING 
Careless or unsupervised use of the sunroof can cause serious injuries. 
�x Always make sure that no one is in the way of the power sunroof when it is closing. 
�x Always take all vehicle

Page 63 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
fig. 36 Press or move the control in the direction of the arrow or in the area shown. 
(B) Raise or lower the seat cushion. 
(2) (C) Adjust the backrest angle. 
 
  WARNING 
Improper use of electric

Page 71 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
�x If the seat is damp or wet. 
�x If the outside temperature or the temperature inside the passenger compartment is 77 °F (25 °C) 
or more. 
 
Function Action for seat heating ⇒fig. 43 
Switch

Page 74 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
  WARNING 
Not wearing a safety belt or wearing an improperly positioned safety belt increases the risk 
of severe personal injury or death. Safety belts offer optimum protection only when they are

Page 84 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
  WARNING 
Improperly positioned safety belts can cause serious personal injury in an accident or a 
sudden braking maneuver. 
�x Always make sure that all vehicle occupants are correctly restrained

Page 95 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
Fog lights 
The indicator light �	in the headlight switch or the instrument cluster shows that the fog lights are 
switched on. 
�x To switch on the fog lights �	 first turn the light switch to posi

Page 154 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
When the ignition is switched on, several warning and indicator lights come on briefly for a function check. They go out after a few seconds. 
  WARNING 
Failure to heed warning lights and instrumen

Page 155 of 339

VOLKSWAGEN JETTA 2013 1B / 6.G Owners Manual  
�x Automatic transmission: The vehicle key cannot be removed from the ignition unless both the key and the selector lever have been moved to the correct position. Press the release button on the tra